Adding water pressure to a Worcester Greenstar 4000.
Пікірлер: 68
@raymondadams5794 ай бұрын
What a star! I am useless at this kind of thing - but you explained it brilliantly. The heating is working again. and my wife is very impressed!
@presneill318 ай бұрын
I was wondering where the adjustment was!!! Brilliant thank you !!!
@thedealermusic Жыл бұрын
Didn’t know I could do this myself. Thank you!!
@robertcarter9748 Жыл бұрын
You have just saved me a lot of money, thanks a lot.!!
@Gh0stGaminginc11 ай бұрын
Thanks, this is where KZfaq is actually useful!
@katemary2331 Жыл бұрын
Omg thankyou SO much! Worked a treat!
@beachtallulah Жыл бұрын
Thanks you very much : very satisfying easy fix thanks to your video
@darrensdiy4769 Жыл бұрын
No problem , glad it helped 😎
@ellababy100011 ай бұрын
Thank you 🎉
@ImranKhan-nf2ir8 ай бұрын
Thank you ❤
@MegaNiceBeats9 ай бұрын
thank you
@jgillingham010270Ай бұрын
thankyoubexcellent
@seaj_94 Жыл бұрын
Where the blue valve is, mine has nothing. Could it be anywhere else? It has a pump attached I dunno if they all do? I've just moved in and not seen this type boiler before 😅
@darrensdiy4769 Жыл бұрын
Hey, kind of depends how the installer has fitted the boiler. There could be valves that need turning to increase the water pressure. Very hard to say without seeing it.
@Susan-uf1gh5 ай бұрын
Mines the same
@youtubebro96 ай бұрын
I dont have this blue pull down part on my one. Its the exact same boiler too which was only fitted Dec 2022. What do i do now? Thanks in advance
@darrensdiy47696 ай бұрын
You possibly have an auto filling setting in the menu. Ive not come across one without the blue lever in all my work unfortunately
@gerboland30649 ай бұрын
I don’t have the blue tag what do I do
@VS-xb1jgАй бұрын
Thank you for this vid, can you help? When I pull the blue valve it sounds like the system is having a problem filling up (like the water is straining to get through), should I switch off the boiler completely and then try to fill up? I was at 0.9 bar and it went up to 1.0 after about 30 seconds but then didn't go up any further (kept pulling for about another 30 seconds) but there wasn't a steady stream of water. Does that sound like there's a problem?
@darrensdiy4769Ай бұрын
You need to hold the blue valve for longer sometimes it takes awhile but you will see the pressure go up via the display.
@VS-xb1jgАй бұрын
@@darrensdiy4769 Thank you very much!
@AFCManUk Жыл бұрын
Our newly fitted one has a white key??
@darrensdiy4769 Жыл бұрын
check out my other vids on topping pressure up on boilers
@ashvanbro932910 ай бұрын
But what if you aint got the automatic filling valve and its a filling loop
@darrensdiy476910 ай бұрын
Go on the same menu and open the valve and turn off once at 1.5bar.
@richardbradley233511 ай бұрын
mines on 9 ...how long will it take to get to 1.0 ???...seems nothing is happening...your vid seems to be cut short.
@darrensdiy476911 ай бұрын
0.9?? If so then yeah it takes awhile to increase pressure so i cut the clip down. It will go bit takes awhile
@richardbradley233511 ай бұрын
sorry...0.9...my mistake...thank you.
@jinjinjiniya Жыл бұрын
mine is the exact same looking boiler but i can’t fin any blue lever
@RonaldoIStheboy Жыл бұрын
I literally had the same problem check you've not got a clip on white cover at the bottom. You'll need to remove that first to access the blue lever
@jinjinjiniya Жыл бұрын
@@RonaldoIStheboy hi i think we’ve fixed it now by calling someone out? but when i removed the bottom white part there is still no blue lever so i have no idea what’s going on there😭
@RonaldoIStheboy Жыл бұрын
@@jinjinjiniya oh. Sorry to hear that. Hope you didn't have to pay too much
@darrensdiy4769 Жыл бұрын
@@jinjinjiniya hi, it depends how the installer has fitted it. They may of added some valves on the cold feed pipe. Hard to say without seeing it.
@aasiaparveen622010 ай бұрын
My boiler ain’t got that blue thing what can I do as my pressure is low
@darrensdiy476910 ай бұрын
It maybe an automatic fill. Would be in special settings in boiler
@ZAK1985723 күн бұрын
My pressure is showing at 1.9 I want it to come down to 1.2 at least but how do I go about that? I’m not good when it comes to boilers 🤷🏽♂️🤦🏾♂️
@darrensdiy476923 күн бұрын
@@ZAK19857 fastest way is to let water out of one of your radiators. Ive done a video on this if you take a look 👌
@booneyinc9515 Жыл бұрын
I hate these digital displays. Slow reaction time. I'll fill mine up to 1.2 and think it's fine. Come back a few hours later and it's much higher.
@ianmillerphotography6 ай бұрын
One admentment to this video. Some boilers, (same make / model) have a white square plastic block. To carry out a repressurisation, carefully turn this anticlockwise, then clockwise when your boiler is repressurised
@darrensdiy47696 ай бұрын
Its probably in the settings and is automatic then. Get the guy to show you how to add the pressure. Will save you £100 in future for a plumber to visit.
@adamboow8299 Жыл бұрын
Why does mine not have the blue valve?
@rs__daz Жыл бұрын
You may have a stainless steel line with a black valve on
@darrensdiy4769 Жыл бұрын
You need to remove the white panel under boiler, two push clips. Then look up to the right.
@davefilms345 Жыл бұрын
We have this boiler and it has no blue key leaver..it's bloody murder because it's meant to automatically refill for you and it doesn't. Even when going into the menu to top up pressure I can't do it. So we have to keep calling engineers out all the time
@darrensdiy4769 Жыл бұрын
@@davefilms345 is there another valve to open to add pressure ? How are the plumbers doing it ?
@davefilms345 Жыл бұрын
@@darrensdiy4769 il find out when they come in a bit. It's all to do with in the menu
@lukemitcheson11712 ай бұрын
If you do this then the water temp goes to 18 degrees then drops once you turn the hot tap on what does that mean?
@darrensdiy47692 ай бұрын
You have simply added cold water to the boiler so temp will go down.
@lukemitcheson11712 ай бұрын
@@darrensdiy4769so do I just let the hot taps run? Because when I turn the hot taps on the temp goes down and they stay cold
@darrensdiy47692 ай бұрын
@@lukemitcheson1171 boiler should fire up when you turn the hot taps on. If it’s not doing this there seems to be another isssue.
@lukemitcheson11712 ай бұрын
@@darrensdiy4769 yeah you hear it fire up then the temperature drops until 14 degrees then eventually the error 247 code comes on and repeat, no problems with it til today either, will have to get a plumber out then by the sounds of it, anything I could try before I do that?
@darrensdiy47692 ай бұрын
@@lukemitcheson1171 sure its 247?
@matthewalderproperty53618 ай бұрын
Mine doesn’t have a blue value but sure it’s this boiler
@rs__daz8 ай бұрын
I believe some can be added via the settings. Unless you have a fill valve below
@jamesmclaughlin5017Ай бұрын
my 4000 dont have this????
@darrensdiy4769Ай бұрын
What the blue fill valve? It maybe automatic via the settings menu.