adding wd 40 to the cylinders
Рет қаралды 631
Күн бұрынjust an update to the welder/generator
@MichealConti-cf7ts Ай бұрын
At this point you don't know if a valve is stuck open. We do know that none of the valves are stuck closed, because the engine turned easy with the tool you were using to turn the fly wheel. If a valve where stuck closed,( you would have had a hard time turning the fly wheel when the camshaft lob got to that stuck closed valve). I would let the WD-40 set in the cylinders till the starter arrives. Your on the right track. I wish I could be there to help you with this Onan engine. I used to work on before retiring. God Bless you and your Husband 🙏✝️💗
@SiouxTribe56 Ай бұрын
The very 1st. YT channel i ever subscribed to Why you ask ? Because the host has Personality/ Charm/ and super good content. Betty i hope you continue with FIRST STARTS that's a winner!! ♥️👍👍👍
@NotamechanicBetty Ай бұрын
I take that as an honor thank you 😊 🥰
@djmarv53 Ай бұрын
Well done! (as usual, ya nailed it) victory awaits!!
@naturalforlife6741 Ай бұрын
Shouldn't you still have compression. That's how I check compression on my motors is with the plugs out. Intake and exhaust valves still opens and closes.
@NotamechanicBetty Ай бұрын
If I use a compression tester it would have compression because the tester would be keeping the air in the cylinder, but since it’s open no compression.,thanks for the comment 😊
Garage 54
Рет қаралды 4,1 МЛН
SmashCrush! Arabic
Рет қаралды 37 МЛН
Auto Expert John Cadogan
Рет қаралды 1,1 МЛН
Midlife Stockman
Рет қаралды 9 МЛН
Karz Kreated
Рет қаралды 2,5 МЛН
Brunet
Рет қаралды 12 МЛН