ADJUSTABLE KNIFE BLADE BEVELLING/SHARPENING JIG (EASY TO MAKE)

Рет қаралды 132,915

9 жыл бұрын

How to make a #knife #bevelling jig. Quick and simple step by step video for perfect knife bevel. PLEASE FOLLOW ALL TOOL SAFETY ADVICE. THIS IS NOT A TRAINING VIDEO, ALWAYS WEAR PROTECTIVE SAFETY EQUIPMENT AND HAVE GUARDS ON YOUR EQUIPMENT, BE SAFE AND ASK ADVICE IF UNSURE. Thanks for watching.
This channel mainly focuses on Hobby Knife Making and any projects we have around the House and Garden. I don't claim to be a professional Knife Smith and I don't and never have offered knives for sale. The way I do it is not necessarily the right way, It is simply a hobby Incorporating Wood working, Metal working and Leather working, recreating age old working tools as in a recreation of the 1950s British Army issue knife, Hunters Knives, skinning Knives, Fishing / Gutting Knives and Kitchen or Chefs Knives. The power tools and hand tools used in my videos may be used in a way that is not recommended and is in no way a tutorial of how to use tools of any kind, always be safe and wear the necessary safety equipment and use your tools in the way that the manufacturer recommends.
Garden Design, Outdoor Buildings, Working Knife & Tool Making.

Пікірлер: 54

@guyhorsen Ай бұрын

Great

@armenvondoms1815 4 жыл бұрын

Finally!! An actual easier way! Thanks!!

@orangetruckman 4 жыл бұрын

Way to follow the kiss method! Thank you for sharing this clever thing.

@heugenelunsford9677 8 жыл бұрын

Thanks for the suggestion.

@brucecampbellforpresident1393 3 жыл бұрын

I made one like this and it works awesome I welded some square tubing on each end for handles an a flat piece of steel on the bolt for stability and off I go.

@inkfx2009 5 жыл бұрын

Just made one quick simple and does the job not sure why all the negative comments this is perfect for when you are just getting started

@GAN369 5 жыл бұрын

I agree with you nice and simple and does the job but as you know well, you can never please everyone, thanks for your comment, very much appreciated.

@dojosai 5 жыл бұрын

Very good job Thanks from Italy🇮🇹🗡

@GAN369 5 жыл бұрын

Thanks for your comment, very much appreciated.

@IvanZehirov 4 жыл бұрын

Thanks a lot! You rock brother

@GAN369 4 жыл бұрын

Thanks for your comment, all the best.

@jadeddragon4254 4 жыл бұрын

Lmao I was watching this and my wife said why do I hear porn music 😂

@aasimshaikh9647 3 жыл бұрын

With all due respect, how does she know that its porn music?😂

@heugenelunsford9677 8 жыл бұрын

Thanks. Looks like you sanded the threaded end smooth with the angle iron and didn't adjust. Wonder if a piece of aluminum angle stock would work just as well.

@GAN369 8 жыл бұрын

I have an aluminium jig as well, absolutely no difference works just as well.

@mr.mduweit8926 4 жыл бұрын

Genie

@GAN369 4 жыл бұрын

Thanks for your comment

@louisfourie7756 9 ай бұрын

What is the music for?

@robertlangley258 4 жыл бұрын

With just the one threaded bolt placed in the center, how do you keep the tool from wobbling to and fro?? Think it would be difficult to hold the jig level while pulling across the sanding belt. The more angle, by screwing bolt in further, you wanted would seem to exacerbate the problem. Please explain.

@GAN369 4 жыл бұрын

Thanks for your question, set the angle and then tilt the jig and put the weight to the front of the jig flat edge, its impossible for it to wobble as it rests on the long front flat edge providing perfect stability.

@happycampersminnesota7526 2 жыл бұрын

I rounded the end instead of leaving it flat!

@robertsmith616 5 жыл бұрын

Would be perfect with bolt on each end for support

@GAN369 5 жыл бұрын

That’s exactly what I ended up doing with ball handles fitted to the bolts, well spotted and thanks for your comment

@williamskinner2732 7 жыл бұрын

First time I've ever seen a linisher used with the back stop in position - didn't look very square though.

@GAN369 7 жыл бұрын

The backstop played no part in the process of flattening the steel, so the angle of it had no bearing on the final result and it wasn't used to create a right angle, it was left on to block the hot steel particles flying off the end of the belt grinder.

@tommyd3jr 6 жыл бұрын

GAN what is it with people and their bs questions? Is there a point to be proved? If not then fuck off

@deanmarsh2544 6 жыл бұрын

Back ground music so loud I couldn't hear a word you said.

@GAN369 6 жыл бұрын

No voice over on this video Dean, Just the sound track so you didn't miss anything, thanks for watching.

@deanmarsh2544 6 жыл бұрын

because I had a machine shop and precision sheet metal background I could understand what you were doing. I thought a novice would need to hear what was being said. Evidently this was for more experienced people. In that case good job.

@heugenelunsford9677 8 жыл бұрын

So what's the point of inserting the bolt and locking nut if you're just gonna grind the end of the bolt level with the 1" bar stock? How to create the proper angle?

@GAN369 8 жыл бұрын

Adjust the bolt clockwise to raise the jig to your desired angle

@jackrusselcrow 7 жыл бұрын

i wondered the same thing... i think it may be due to the bolt itself sometimes they are not completely flat at the end so to make sure it is perfectly flat sand it flush with your bit of metal.

@GAN369 7 жыл бұрын

I have not seen a bolt with a perfectly flat end, that's why you grind it flat, you have answered the question. Its much easier to get the desired angle with the bolt being ground flat but to be fair it was probably overkill because you will still get a nice grind without flattening the bolt, its not essential.

@happycampersminnesota7526 2 жыл бұрын

I rounded the bolt end instead of having it flat!

@Mr.Big-Gunz 5 жыл бұрын

Left time the music started...how can anybody learn with that ear polution playing loudly...

@GAN369 5 жыл бұрын

That's possibly the most popular piece of music on any video I've uploaded, but it just goes to show yet again you can never please everybody, other than that I appreciate your constructive criticism and your comment, cheers.

@TheDanishka88 8 жыл бұрын

nope.. this is not that kind of sharpener

@007Jaredboy 5 жыл бұрын

For one this is a bevel grinding jig not a sharpener; but more relevant: why are the bevel lines so uneven and wavy? you can clearly see they are uneven at the end of the video.

@GAN369 5 жыл бұрын

Your absolutely correct, that was the first knife I ever made and the first time using that bevel jig, the bevels were crap, well spotted, Thanks for your comment.

@moali1169 5 жыл бұрын

Good vid... bad bad sound...

@GAN369 5 жыл бұрын

Thanks for your comment, very much appreciated, glad you liked the video.

@moali1169 5 жыл бұрын

@@GAN369 would be good to actually hear what you are saying. Maybe upload again without adding Music?

@GAN369 5 жыл бұрын

@@moali1169 There was no commentary.

@moali1169 5 жыл бұрын

@@GAN369 definitely sounds like you were talking lol

@GAN369 5 жыл бұрын

@@moali1169 33 videos in total on this channel and no talking in any of them, thanks again for your comment.

@CurmudgeonExtraordinaire 4 жыл бұрын

"gan" (干) means "fuck" in Mandarin... Was that intentional when you chose that as a channel name?

@williamskinner2732 7 жыл бұрын

Sorry mate, it's just that, as I said, I've never seen the back stop used before even after a long career in the jolly old engineering! I have a back stop for my own linisher, but as must be obvious by now, I never use it. Enjoy yourself mate! (from the UK)

@GAN369 7 жыл бұрын

No worries and no offence taken, you made a valid point and by the way I'm far from being an expert at this. Thanks for your comment