This video documents my experience with a variety of turbochargers on my personal 370Z, demonstrating the power gains and restriction points I ran into with each setup. www.admintuning.com @admintuning
Пікірлер: 80
@Kicknicks2 жыл бұрын
Finally a tuner who knows what they're talking about and doesn't sound special ed.
@anthonyvhr2 жыл бұрын
Moncef always giving the best advice for our vq’s 🔥🐌
@EddieZ33HR6 ай бұрын
Facts 🙌🙌🙌
@kevinumana46432 жыл бұрын
Your car runs real nice bro. I have a 09 7AT G37 sedan RWD and I love to drive in sport mode. But when im cruising with my family in the car I keep it on D. However lately I have been having this issue where if I have it in D, any road where I have to maintain speed of over 50mph, the car jerks, loses power and I cant go past about 65 mph without it jerking violently. Now I only use it in sport mode because I noticed as long as I keep it from going into 6th and 7th gear it wont jerk and lose power. But if i forget and shift into 6th it jerks and also the CEL, SLIP, and VDC light come on. As long as i stay off of highways and long roads that require 50mph or higher im good but as you know, nobody buys these cars to drive them slow.. I have changed the Valve Cover Gaskets and spark tube seals, the spark plugs, 2 new maf sensors and 1 maf sensor connector… i dont want to get rid of it but i dont know of anyone else who has this problem so now im just asking anyone in the VQ37 community. If you have any knowledge of what it could be I’d greatly appreciate it.
@michaelvillarreal58762 жыл бұрын
hi, just found this channel, thanks for putting out no bs content with clear direction. i’m curious if you guys have experimented with any itb setups and if you think it would be beneficial (complete setup/supporting parts) or more of a diminishing return on this platform
@admintuning2 жыл бұрын
I think it would be worth substantial power & response, but you need Motec to control it properly, so implementing it would be very expensive.
@finkdizzle2 жыл бұрын
Id like to sit in that rocket and feel the power. Looks insane on the road 🔥 good shit as always
@jdstarek2 жыл бұрын
glad to see some new content. looking to have my G37 tuned, how do I get in contact? the address in the "details" doesn't work.
@zachkoonz64432 жыл бұрын
Just email him or dm on insta
@admintuning2 жыл бұрын
Send me an email. Moncef.faik@gmail.com
@jhonsmith21502 жыл бұрын
1st turbo kit wld b jus fine for me! I coo wit 600HP! Even though I jus bought another 350z last weekend! I'm still Looking for 370z 6spd VQ power varooom varooom 🚗💨💨💨😁👏😎
@boomsjapan Жыл бұрын
Stock motor? Wow impressive numbers i thought these motor were only good for around 500 rwhp do you have a list of supporting mods you have done.. Cheers ..
@lostjester Жыл бұрын
thought he said it had pistons and other stuff thats not stock
@boomsjapan Жыл бұрын
@@lostjester first tune was stock motor!
@lostjester Жыл бұрын
@@boomsjapan yeah i see, i might bumped the skip button a few times while watching cause i perfectly skipped to him saying forged pistons
@viciousvq18242 жыл бұрын
Awesome informative Video 🐐
@NVSTRZ342 жыл бұрын
Awesome results and video 🤘
@tylerhoffman4836Ай бұрын
I want to go a rear mount turbo mainly for aesthetics. What would be the smallest turbo you’d recommend not looking to make anything more then 500? Just want something that spoils fast.
@admintuning29 күн бұрын
Rear mounts are probably the least aesthetically pleasing turbo kits and they sound the worst also. But for fast spool, a PTE 6266 or 6466 would be the best bet, and they can still make great power.
@TurbhoeHDRemix Жыл бұрын
Let's say I had a G37, could I reliably make 470 whp with a single turbo fbo kit with your tune? I want speed, but I want it to be more of a complete package car than a drag car
@mimsaad2 жыл бұрын
So the engine was built along with first turbo change . Nice results bro 👌
@reedhoffman28892 жыл бұрын
Great camera work haha.
@brianjackson57322 жыл бұрын
What was the wheel torque when you hit 672 whp on the BP turbo kit when you maxed out?
@admintuning2 жыл бұрын
Over 570wtq.
@brianjackson57322 жыл бұрын
@@admintuning Those are excellent numbers. I know the built motor crowd would want more, but these are great numbers for a stock block.
@admintuning2 жыл бұрын
@@brianjackson5732 I definitely folded those rods like lawn chairs at that torque level on the stock engine.
@brianjackson57322 жыл бұрын
@@admintuning Really, I figured that you would get to around 600 wtq before the rods would give. I guess that e85 has given many of us unrealistic expectations.
@admintuning2 жыл бұрын
@@brianjackson5732 GTR motors will hold around 600wtq, a VHR motor torque threshold is a lot lower, realistically if you want it to last you want to stay under 500wtq.
@oep_350z52 жыл бұрын
Going to him for my tune 🙏🏾👍🏾💪🏾
@CBiskitone2 жыл бұрын
Nice video. Could you help me? I’m working on a 1992 Nissan D21 with a 2.4 KA24E and a 5 spd tranny. What size turbo would you recommend for a daily driver that might see track from time to time?
@fernandohood55422 жыл бұрын
RPM instead of mph.(Done near the end) Boost response plot verses rpm. Would add another dimension to the discussion. 6275 -6875 - All the low end torque gone and no increase in Horse power. - Torque increased at top end but horse power is the same. How is this possible? What would have been the power of the 6266 on 24psi ? 7675 Does it not have the same compressor size as the 6875? Low end torque drops even more. What matters most to a driver? Low end torque and boost response or massive power at top?
@admintuning2 жыл бұрын
a 6266 will be lucky to touch 700 on this engine at max. 7675 has the same turbine as a 6875, but the compressor wheel and compressor cover are radically different (this is covered in the video). Having more power where you actually need it (high RPM where the engine is at during high performance operation) is more important than having a lot of torque at low RPM and horsepower trailing off at high RPM.
@fernandohood55422 жыл бұрын
@@admintuning Fair enough. On the street I prefer good low and midrange torque verse massive top end power. Something is not right at 3:08 with the graphs. I would like to see more on the 6266 side before jumping to a huge turbo. What A/R was used on the turbine housing? I would have stuck with the 6266 and perhaps go up on the A/R on the hot side . Other options would be go 6466 with the same A/R or increased A/R on the hot side. As indicated previously plotting the boost response would be nice. Full drag setup would be bigger is better as you stated.
@admintuning2 жыл бұрын
@@fernandohood5542 the 6266 was a 1.15 AR divided housing. Anything smaller would make less power up top. The 6875 was noticeably laggier than the 6266 at first (on the dyno), but on the street, they felt very similar (probably just my driving style). Increasing the hot side only does so much, when you have a restriction on the cold side (this was explained in the video as well). I have tuned 370Zs with this turbo kit using a 6466 and they max out around 720-760whp depending on weather conditions. This is why I made this video, to illustrate that you need more cold side for this engine. It is 3.7L of displacement with very potent, efficient cylinder heads, which means that the turbocharger becomes a restriction earlier on this engine than other import car platforms. This is not stated in the video, but the 7675 made 850whp on one of the pulls I did, but the injectors were maxed out. If I had larger injectors, the 7675 could easily support close to, if not right at 900whp peak on this engine, and potentially more (hard to say because other restrictions would come into play).
@KevinGarcia-jz3jz2 жыл бұрын
Nice 370 but Totally irrelevant to the video my question is what are the best upgrades for a 2011 g37xs sedan or if it’s even worth upgrading is it bad for the motor perhaps bc it’s not the vhr like the 2012?
@admintuning2 жыл бұрын
Please watch the other videos on my channel pertaining directly to your question.
@yungqueso42112 жыл бұрын
that thing GETS holy shit
@520strangerful2 жыл бұрын
Appreciate the detail
@tylerrussell48852 жыл бұрын
Me sitting here looking at the turbo in my cart and this pops up. Kinda creepy Moncef. Lmao
@g37x52 жыл бұрын
Bigger Turbo, Bigger Displacement for your goals! Always logical 😈
@RussellSpillers2 жыл бұрын
Nice!
@72mlauer2 жыл бұрын
I’m torn between a supercharger set up or turbo… what would you recommend?
@admintuning2 жыл бұрын
For manual cars I always recommend a turbo kit. For auto cars I would suggest supercharged with air to air.
@72mlauer2 жыл бұрын
@@admintuning just curious but why the difference?
@72mlauer2 жыл бұрын
@@admintuning I have a manual… would you recommend a single OR twin turbo?
@admintuning2 жыл бұрын
@@72mlauer boosted performance single turbo is best
@zlow_de61332 жыл бұрын
That’s my tuner 🤌🏽😮💨💯 the goat 👨🏽💻🐐aka dad
@demigodq60832 жыл бұрын
Having trouble finding out who and where can I get a boosted performance kit for the G37. Drop me some info
@smokinmyopps47662 жыл бұрын
Ever since I’ve been admin tuned, the girth on my penis has increased by an incredible amount. Thank you so much Moncef.
@vhrnick2612 жыл бұрын
Do a nitrous video please!
@fernandohood55422 жыл бұрын
Its a shame precision does not have compressor maps.
@kev_g37x2 жыл бұрын
Hay moncef, For an auto g37x would you prefer a turbo set up or supercharger set up, I want to hit 600-700whp can’t decide man
@Mack-yo3mx2 жыл бұрын
Twin turbo …..with supercharge you gonna be around 450-550whp if u want more you have to build ur motor
@admintuning2 жыл бұрын
@@Mack-yo3mx this is incorrect. My stock engine G37 coupe made 630whp with a SOHO supercharger kit yesterday.
@Mack-yo3mx2 жыл бұрын
@@admintuning dawn man that’s crazy numbers with stock block
@kev_g37x2 жыл бұрын
@@admintuning you are the 🐐 bro
@priize13642 жыл бұрын
It would be bomb asf if Moncef still tuned 7th Gen A35s 🙏🏿
@haydenheath64062 жыл бұрын
second lol
@louiienation8497 Жыл бұрын
What was the AR on the 7675?? Would it make 900whp with ease?
@admintuning Жыл бұрын
96 AR. It will make 900 but that would be at its limit on this turbo kit, you’d need a completely new kit to make 900 with “ease”.
@user-bd6qv4hc8l Жыл бұрын
Do you prefer precision billet dual ball bearing or Garret G series
@admintuning Жыл бұрын
I noticed VQs like bigger compressor covers that the Garrett units have. But a lot of it depends on the turbo kit also. I am using a Pulsar7375G (copy of the Garrett G42-1200c) now and this very same 370Z is now making 900whp+. You can check out my most recent video for more information on it.
@admintuning Жыл бұрын
I noticed VQs like bigger compressor covers that the Garrett units have. But a lot of it depends on the turbo kit also. I am using a Pulsar7375G (copy of the Garrett G42-1200c) now and this very same 370Z is now making 900whp+. You can check out my most recent video for more information on it.
@cg57012 жыл бұрын
Can that baby make it to Vegas? How reliable?
@admintuning2 жыл бұрын
Yes, I drive it everyday.
@Forged4072 жыл бұрын
Hello
@Turtlefarm2 жыл бұрын
I Wana add nitrous… do you recommend dyno for data logging? I feel like it would Give best results
@admintuning2 жыл бұрын
Your location is pretty key here - send me an email if you are interested in exploring what your options are. Moncef.faik@gmail.com.
@msp8452 жыл бұрын
You think the power is limited because we are limited to the turbine housing a/r size?
@admintuning2 жыл бұрын
It really depends on the individual combination.
@LehanBreytenbach Жыл бұрын
How would a Garrett GTX 3584 Rs do on a Z
@admintuning Жыл бұрын
Too small for most serious applications,
@LehanBreytenbach Жыл бұрын
@@admintuning i know its a 67mm turbo and can go around 1000hp but how big turbos do u use for your Z's
@admintuning Жыл бұрын
@@LehanBreytenbach a 67mm will not do 1000 on a vq, the video answers your questions in detail, you could watch that instead…
@Auxbeam2 жыл бұрын
Hi Do you need some great lighting for your car to help you better driving at night? We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!