ADO bikes & accessories are available from the official shop bit.ly/OfficialStoreADO ADO spare & upgraded parts can be found on the official AliExpress store bit.ly/OfficialStoreADO_AliExpress You can now also join the Official ADO users group facebook.com/groups/adobike01

Listening to you explain the settings rather than trying to decipher the manual was so much easier! Big thanks from the UK :) 👍

Summary for y’all: P01: Brightness P02: Km or Miles P03: Voltage (Only effects how battery gauge reads) P04: Control panel sleep time P05: More assist modes P06: Wheel diameter P07: Number of magnets P08: Speed limit P09: Start with pedaling or not P10: 0 = assist 2=both HAVE ON 2 P11: Assist delay P12: Acceleration P13: Pas sensor (DO NOT TOUCH) P14: Limit to prevent battery damage P16: Reset odometer P17: Cruise control P18: Speed tuning P19: Assist or electric mode P20-P22: DON’T FUCK WITH

Excellent video. The only KZfaqr who actually goes through the settings

DEFAULT SETTINGS 🙃: P01: 2 (Display brightness) P02: 0 (Km or miles) P03: 36 (Nominal voltage) P04: 10 (auto sleep timer minutes) P05: 0 ( power assisted mode ) P06: 20 (wheel diameter) P07: 1 (number magnets motor) P08: 25 (speed limit, increase to 44 for max speed) P09: 0. (non zero start, 0= no pedal needed) P10: 2. (drive mode, electric, assisted or normal bike) P11: 2. (assist delay since pedaling started) P12: 3. (Strength of acceleration) P13: 12 (PAS sensor) P14: 15 (controller current limit) P15: 29 (battery controller voltage limit) P16: 0 (reset odometer, km to 0= new bike) P17: 0 (cruise control) P18: 100 (Display range adjust) P19: 0 (0 gear assisted) P20: 0 (controller communication mode)

Thank you so much for taking the time and explaining it so thoroughly - gonna go tune my controller now and will KNOW what I‘m doing ;) Thx again!

Dziękuję bardzo. Świetne wideo 👌

Thanks for the helpful video. Got my bike today!

Thank you. The very best explainer on KZfaq.

I almost sold my bike and start looking for a new one !! U saved me bro !! Thx 🙏 😅

Wooooow you saved my day, thank you very much sir I knew there would be a smart person as yourself that would know more about sheng milo mx20

Just ordered this coming in tomorrow thanks so much

very good explanation for the settings , i did not see anything on regards to the Battery Indicator , as mine does not go down with use , so i can not see how much power is left after a period of time , maybe the battery indicator is fulty ? what would you advice ?

Thx a lot! 👍 Similar lcd is in Bezior xf200, I'll check it today.

Hi there. Thanks for the great video. My ado A16+ only has 3 assist and throttle only works on assist 3. If I change it to to 5 assist, does the throttle work in all levels? I am curious to know. Thanks

Very helpful and straightforward thank you

Thanks for explaining, help me a lot, great job.

Thank you for this video, very well explained

Grazie utilissimo 🔝🔝🔝🤩non andava più la mia bike …….. però forse mi è saltato il faro davanti per la variazione di alcuni parametri 🤩🤩🤩

Very informative video Sir.. Thank you for this. I have a Emotorad t-rex which has this display unit. Due to restrictions in India i'm unable to go beyond 25km/h. Now I set it to 35km/h it runs more faster than usual. Thank you ❤️

Thank you very much. Interesting information. Thanks.

I just got an A16 this week was working perfectly, but I noticed over the last two days only the pedal mode assist was accelerating me and not the right trigger. It seemed as though the right was broken but I don’t know any ideas ?

Very usefull information, thank you very much

Very good and informative, I have just fitted the newer controller and cruise control definitely works

This works for my IX4 scooter. Thanks.

Thank you so much!!!!! Really helpful.

Super bien explicado, muchas gracias!

Great explanation! Thank you! I need help: all is working fine on my bike, but today it stopped showing the speed and registering kilometers, then it worked again later, now it's not working anymore. What could be the reason? Thank you!

Hallo i have urbanglide ecross pro boost 1600 i must do the same procedure to unlock the speed limit?

Can i switch on and off for PAS mode and throttle mode? And do this meter able to work on all controller?

Hello. Excellent video mate. I just got a second hand ADO A20 and I try to reset odometer but I can't do it. I am at P16 pushing the minus button to change my km to 0 but nothing happens

Very helpful - thank you Sir.

Hi thanks for the video I just got my AF20 and the motor doesn't engage I don't know if I got the settings wrongI got no power whatsoever or throttle the controller is an 866 is there any factory settings? The controller doesn't show any speed or distance and I noticed that the cover on the left pedal is a bit loose (guess where the magnet is situated) any help here would be appreciated. Thanks

thx for the nice tutorial. is there any way to set everything back to default ?

Are we supposed to click any buttons in order to save the settings ?

Hey, thank you for video. Very useful. Is it possible to show battery life in percentage “%”? When I turn on the display I can see for a few moments percentage and then it will be disabled. By pressing power and “+” button I can enable Max (MAX) and Average (AVG) modes. But I can’t switch to Distance (DST) mode. Can you please help me? Thank you in advice 😊

Very helpful, thanks 👍

you are doing god's work my friend

P01....Brightness 1,2,3; P02....Km/m; P03....Voltage 32/48/60; P04....Sleep time minutes; P05....PAssist number of modes; P06....Wheel size inch; P07....Magnet number in motor; P08....Speed limit; P09....Start level of PAssist; P10....2=Peddle & throttle Assist; P11....Boost sensitivity=1; P12....Boost start strength; P13....Number of magnets; P14....Current limit in Amps; P15....Low Voltage power off; P16....Clear milometer; P17....Cruise enable/disable; P18....Speed ratio % adjustment; P19....1=Direct Hub 2=Gear Hub; P20....Protocol=0000

Thank you so much. From Paris

i dont understand how i can reset the odometer,the p16 can you make a short video for that? will be so useful thanks

Hi great video I bought my bike a couple of weeks ago The throttle does not work even after your set up advise I complained to the shop and asked for a new throttle this arrived eventually I fitted off the bike went through the set up but still does not work would this be a faulty controller

Hi, Your videos are excellent!! Very detailed so I can know what to expect when I buy an ebike. Could you tell me how many teeth the crank wheel has? You talked about increasing it to 58 teeth so the rider doesn’t ‘ghost’ pedal. Your English is perfect!! Thanks, Bill (UK)

Thank you so much. I have an A26 and this video helps me a lot. I just have a question: Is it normal when I go through a hole in high speed, the display shuts down and sometimes it's hard to turn it on again. Many times the display only turn on if I push and pull weakly the battery.

Excellent video! I only have one question. What should I do to reset the odometer? Do I just push the minus button to reach the 0km?

Thanks! This helped a lot.

Thanks for you help, do you know how to reset it back to factory settings?

Hi. I Have A16 but it doesn't have accelerator and it goes automatically. Do you know how do we control speed if we have to increase or reduce speed. Thanks

That was the most complete video of how to set these up. I have just ordered one of these as my controller has gone bad and was wondering what happens if I remove my battery from the bike to take indoors to charge. Does the display loose all the settings and have to be re-programmed again when I put the battery back ? Many thanks for the video and I await your reply.

hey what would be the best setting for battery under voltage protection thanks??

Thanks for the video. I have a question. When I start pedal and electric motor start running too. But when I stop pedal the motor will keep running about few seconds. Witch one can adjust when I stop pedaling motor will stop right away. Thanks again !

Witam mam pytanie wymieniłem teraz sterownik na nowy s866 wraz z wyświetlaczem. Niby wszystko ok ale mam problem. Podczas pedałowania prędkość na wyświetlaczu pokazuje prawidłowo ale jak przestanę pedałować jadę na manetce prędkość spada do zera co może być przyczyną miał ktoś problem taki, i 2 rzecz po zaśnięciu wyświetlacza po paru minutach kasują mi się km przejechane i od zera rusza. Dziekuje

Thanks a lot it helps me a lot.❤❤❤❤❤

THANK YOU So So So Much ❤ This video has helped me set up my Bezior XF001 👍🏽 My controller is different but the interface is exactly the same for the list of settings 1-20 👍🏽 You seem to be the only person who explains all the settings in detail on the whole of Yourube haha 😆 So thank you again from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

What about the main screen not in the settings? I've seen some S866 displays look different with the battery meter at the top and able to show watts/current

How to save changes because every time I put the correct details it does not save when I switch off and on again it goes back to factory settings also does not display accurate speed

Thanks for the video...😁😉😎

Once again thank you for your reply I set it at 000 on program 9 but throttle still not working even after replacing throttle It must be the controller at fault as I have set all programs as suggested thank you

My cruise control works great on my ADO A20+ in the 3rd gear (no pedal assist mode)....it turns on after a 30 seconds at least.

Very informative, thank you! I don’t understand the P15 option though. Are you saying you’ve set it at 29V which makes the Bike battery turn off once it gets to this voltage when riding? I’ve got a 12-15 mile commute to work and I plan to re-charge the battery when I get there. My plan is to set the P15 option to 0v or 1v. Is there any harm to the battery in doing that?

Please concerning P10 from what settings can you disable and enable the throttle I will like to choose either assisted or electric Thanks

Hi, do you recommend ADO A20 or the Fiido D4S? Considering the pedal assistance as criteria

when I do what you say to do to speed up my bike it doesn't go to PO mode. it goes to C mode what is that

Hola muy buen video, una pregunta en el P09 arranca desde la primera pedalada? O hay que esperar dos pedaladas igualmente? Gracias

To get cruise control to work at least on my bike ( I have a s866 controller it's a hit way bk11) hold the throttle in a comfortable position say going 13 mph hold it there then push and hold the negative sign (-)on the controller. After a good 3 to 5 seconds a letter "P" will appear on the display where the assist value number normally is.you'll be able to let go of the throttle and you should be able to maintain that speed even if you start pedaling. I use this function to set my speed to something that's comfortable for me to keep pedaling with resistance while in 7th gear and not feel like im doing the running man..lol. just a nice powerful pace and I can continue to provide manual power and save a lot of battery as my pedaling and the cruise control work in tandem. Please let me know if you were able to get this to work for you.

Thanks for this video, very handy! I just bought a ADO A20+ international and I tried to unlock the speed limit. Already set P8 to 100 and P5 to more levels of assist. But yesterday when I tried it I could not go faster than 25 km/h. Don't know why... Does the 35 km/h only works in hybrid mode with throttle or does it also work with electric assist? I didn't receive the throttle yet, so can't try that.

Hi . Thanks for the good reviews but my A20f does not have trottle response. Do I have to upgrade the controller ??

Hi, any ideas why my milometer has stopped recording the miles properly (got the first 11 miles done and seems to have gone bad). Also, the battery seems to show low bars very quickly, say after a few miles (4m) of riding part assisted mainly and a bit of throttle and getting 1-2 bars on assist 2 and peddling ( bike is set to 36v ). Bit worrying for a longer journey if I have just got the bike and the battery is fully charged? Regards

Hi Sir, thank you for this video. I am totally new to e-bikes, i live in Holland, so only 25kmh pedal assistant with no throttle are allowed on the public roads. I want to adjust the settings to follow the rules, what settings and steps should i apply? Doesnt matter what i do, nothing changes

Thanks for this helpful video. I managed to get the cruise function to work after activating it on the settings panel. Just hold and keep the speed you wish in assist mode 2 or 3 for about 10 seconds. This activates the cruise mode.

Hello! Is it possible to set the display to show the battery voltage as a percentage?

I’ve done all the settings but the speed stays at zero when I ride do I need to activate it ?

My menu P13 is set at value 10 (I am unsure if the A20 came like this, or I changed it by mistake when playing with menu. Do you think I Should change to 12 as per on your video? Many thanks.

Great video, very informative. Please could you tell me the best settings to have with a 36v battery, it seems to switch off the lcd display and cut everything out when i use pedal assist on a hill even on a fully charged battery. The bike is only a few months old too.

Thank you. I have stumbled on your channel because, I was messing with the settings and I have lost my assist mode though I still have the throttle. What have I done wrong?

I very much appreciate the way you explained how to program the S866. Thank You!! I have a problem that I've not been able to solve; I hope you can help or anyone reading this!!. I have an Extreme 36V bike, and I've replaced the controller with a Zerone Brushless Controller that I got on Amazon. Everything seems to work except--- once the PAS engages the motor, it accelerates (fairly rapidly) up to the maximum speed for the range setting. There is no proportionality to the rate of pedaling to the assist from the motor. It's all or nothing. It's my wife's bike, and she can't ride it that way. Is there anything I can change so that the assist is in some way proportional to the speed of the pedal rotation? Here are the settings I've programmed: P01: 2 P02: 1 (miles) P03: 36V P04: 3 (Auto off, 3 min) P05: 1 (5 assist levels) P06: 26 (wheel diameter) P07: 80 P08: 100 (speed limit) P09: 0 (zero start enabled) P10: 2 (Throttle + Assist) P11: 5 (PAS Sensitivity) P12: 3 (PAS Start Intensity) P13: 8 (Number of PAS magnets) P14: 20 P15: 26 (undervoltage level) P16: 25 P17: 0 (cruise disabled) P18: 99 (speed ratio adjust) P19: 0 P20: 0 P21: 0

Good morning ! I have a A26+ and I wanted to know if an improvement for the max speed? I am currently at 35km/h and I would like to have it homologated but for that I have to reach 50km/h Is there an improvement?

Hi, i have the same display on my bike but do you know how to factory reset so the settings go back to same as when bought at all please?

Buona sera. Nella mia ado a16+ la pedalata assistita in partenza si attiva solo dopo 4 o 5 pedalate. Il p11 è a 1. Come posso fare per avere una attivazione della assistenza più immediata? Grazie

can you help me on the manual of this controller says "P12: Help start intensity setting range: 0-5;" and in this videos you said "P12: Electric mode acceleration strength" is this the same? very nice video btw, also i have 1000w ebike with 48V/15Ah baterry and Control system is "48v20a Vector controller" in P14 what setting should i use? 15a? 20a? default number its 13 don't know why

Hey I got my ADO A20+ the other day, loving it. Im unsure how t oactivate cruise control though, any ideas? Pretty sure mines the new controller.

Hi there I have the new controller with the 16 settings,but cruise control is not enabled. Is there a way to enable it?

Hi, thanks for the video! Do you know any good battery to upgrade the A20 one? Like a 48v 12a instead of the 10a

Respect on a Great set of videos on the Ada a20f really helpful and informative I was hoping to upgrade my motor to a 1500w and my battery to a 48v 19.2ah mounted on the frame and upgrade my controller but I want to keep my display and currant wiring don't want to change everything can you recommend a controller that will support this please.

My bikes odometer and speed is off compared to a GPS unit I have. Which setting do I use to adjust this? My display is slower and shows fewer miles than the GPS unit. Thanks in advance for your help.

Should the voltage be set to match the battery? My battery is 48v, so should I set it to that? Or is under volting okay? I got my bike second hand and all the settings have been changed for max speed lol so I wanted to make sure all the settings are okay. Don't want to damage the battery

Hello, I wanted to ask you when I enter the hidden menu to increase the speed of the electric bike, what should I put in the hidden menu of P02 P03 P04 P05 P06 P07 P08 P09 P10 P11 P12 P13 P14 P15 each number of P02 P03 P04 P05 P06 P07 P08 P09 P10 P11 P12 P13 P14 P15 P16 under yours there are other numbers. What numbers should I put in for the electric bike to go at full speed? I have a 750w 48v motorcycle

Hi, thanks for the video. My S866 Display does only provide programs up to P16, next it jumps back to P01. I can't access P17-P20. But I need to change the protocol (P20), because otherwise it isn't compatible to my bikes controller. Do you know what I can do to access P17-P20?

Hi have to mention the other problem some bikes are sent out with throttle disconnected and have the new controller fitted To unlock you have to hold right hand brake and full throttle in off position turn on bike wait 10 seconds then turn off then back on then the motor will work

P08 is my favorite!

Hello! Can this bike be tuned? Take this to mean that I want to include a 48V battery. This should increase your range in pure electric mode. At 0:44, you said that this bike knows the 48V system. What should I pay attention to when buying a battery?

thank you from the uk

Hi! I got my A20F for about 4 days now. I'm in Hybrid mode using the throttle in the third assist mode. When I'm in the second assist mode I get pedal assist until 25 km/h. Unfortunately it feels like I'm pedalling ''air'' even when I'm in 7th gear (It feels very light). I want to be able to give more power myself so the bike doesn't have to give so much motor power and let the battery drain faster.

Is it possible to make different acceleration levels on different assists levels? My bike is very powerfull on ANY pedal assists. Just few pedals rotations and the bike starts in full power. Doesn't matter which assist levels are using.

Thank you sir

What level would you recommend to set on p12? My pedal assist stopped working suddenly I'm.not sure if I moved it without noticing

Can i fit a bigger battery on the a20f like a 48v 17amp

Hello i have joust bought ado 20 and i have a problem with the throttle, is is not responding as it should be .I have made the adjustment as you describe in the video but i twist the throttle but it is not working .I only have petal assist..can you advice something

thanksforthis video ,now i know why my battery always was empty fast sellertoldset on 48v but youre advice put it on 36 voltit doesnt change speed but battery not fast showing empty had buy new display so now and rhank youre very good explaining video i got it working as should really good thank for this video ( even i have other bike works with correctly as it should )

When I start it up it shows that there is a battery percentage section. How do you get that active on the screen?