Thankyou for posting this diagram. I had an axillary switch and it drains the battery. I DIY everything back to oem using your diagram video and was able to connect my fan module. Thanks

VERY GOOD VIDEO PLEASE DO MORE VIDEOS LIKE THIS ONE I HAVE LEARNT A LOT FROM IT THESE ARE THE VIDEOS THAT ARE VERY EASY TO UNDERSTAND AND THANK YOU FOR YOUR TIME .

Thank you for putting the waveforms in this video; very helpful!

Thanks for sharing your experience with us!

I'm your old subscriber and this channel is awesome 👍 thanks for making videos stay blessed.😇😇👍

good video! also, what software do you guys use for the old/new narration of txt? thanks!

Love these types of videos big thumbs up 👍

excellent sir...

Very nice video 👍👍👍

Good video and info as always thank you for sharing. cheeeeeeers

Cool !

Hi, thank you for the video. Can one use say a Temp switch (thermostat in oil radiator) to output the signal to the module to control the speed of the fan?

Good !

This is great -- it let me confirm what I was guessing about this dumb FCM which seems to give out regularly. I'm thinking of interpreting the PWM with an arduino-like microcontroller and driving my own big fat super-low-resistance FETs to run the fans.

Thank you for your excellent presentation. I have a 2005 Mazda MPV ES. The radiator cooling fan it's a dual fan system. One of the fan not working, the other it is OK. The fan that doesn't working has 4 wires. How to test that fan with 4 wires to make sure it's bad?

good explain I need thanks prof

so what you do if you dont have this performant machinery to test the module, im sure most of viewers dont have this so can you replicate the pwm signal trough a rc radio receiver ? they work on pwm signal, was curious if I can have same result.

So the yellow wire is get signal from the temperature sensor?

I have cuestion please sr. I have a DS 213 mini osciloscopio and I am just wondering if it would be possible to use the "waveform generator" function to put frequency or to do something similar like PWM. I am not totally sure about it. Thank you for this video tutorial.

I'm hoping to use one of these Fan control modules in an older car. Can i hook the trigger wire to a temp sender or override switch if i don't have an ecm?

👍👍

@adptraining how does the second channel is working ? how to trigger channe 1 and channel 2 with 2 temperature levels ?

I have mitsubishi outlander 2003 ( first model), used this module. Fans not working, I suspect control module but find that carbon brushes inside fan motors have worn down to zero and commutator damaged in the process. Car has 220,000km assume original fans, so can expect fans brushes to need replace around 200,000km. I have not yet tried control unit on new fans so dont know if it has damage also. Fan motors not really designed to take apart but can do fairly easily just by bend out metal where its pressed in on rear of motor. Regarding video, excellent info, would be interesting to see what signal the ecu of a car actually outputs to control the fan, that pulsing of the motor speed at certain on/off percentages of the pwm I would doubt is used by ecu, I dont think the fans pulse the speeds in a car.......I could be wrong.

I always thought that the air con controller is built into the ecm?

Hello im asking that pwm bi directional controller is for sale. If for sale where can buy. Thank you

Please advice how to test the fan control module is working or not, can we use multimeter to check that ? . Thank you

شكرا لكم وأصل شُغلك المـُمتآز Keeeep UUUPPP . بعد شـُـكر الله ؛ أُكرّر شُكري لكم مـُـهـندّس صيآنّة طآئرآت مدنيــّـة ومـُفتش مُرآقبّة الجودّة ARAB Engineer AND : Sr. Lead QC Inspector FAA, IA Inspector . NDT/NDI LEVEL II Inspector

Sir ,, if the fan is prematurely engaged. Is it the premature signal from ECU? Or the module is bad? Share ur opinion sir.. Thanks

👍👍👍👍🌹🌹🌹🌹

Could this work as a replacement of another fcm of another car for example a volvo?

I've recently replaced two of these fan control modules on my car. First the factory one failed after fifteen years, then the non genuine replacement failed within two months, so I spent $388 to get a new genuine Mitsubishi unit.

Your videos r much better now since u dont use computer generated voice

Is possible to control the fan from inside the car what should i use

And how we can increase the speed of the fan?

Cooling fans stop working mechanic said ecm replace with new flash one, later down the line unplug battery cooling fans stop working again help please

answer some question.

My car is deawoo matiz year 2000 model,the fan is not working😢

Videos are good but I can't stand that computer voice - had to unsubscribe.

This is the worst electronic testing equipment I have ever purchased in my entire professional life. There is no instruction available on how to use it, no warranty terms condition, absolutely nothing.