Just finished the playlist on electronics for beginners. Been learning electronics for a couple of years and still learned a lot. I really worry that sometimes I don't have a good basic grasp of the fundamentals and this playlist helped me a lot.
@latzobear7 жыл бұрын
thanks dude, if I ever get to accomplish my dreams, it'll be because of you.
@jeremyjoethomas12293 жыл бұрын
are you winning son?
@abdulrahmanembabsha86253 жыл бұрын
What’s your accomplishment(long word ah)
@alektad7 жыл бұрын
You've forgot to mention a crucial thing, which is that everything runs on white smoke, once the white smoke gets out it doesn't want to work anymore.
@curiosity5517 жыл бұрын
hahaha
@aajjeee7 жыл бұрын
exept for those who run on blue smoke
@gyrgrls6 жыл бұрын
That's magic smoke. FWIW, the LED was still glowing while the resistor was burning. DAMN! And I was willing to take side bets on which component would go open-circuit first. NO FUN! But, since LED's have an internal resistance, they are self-limiting, therefore negating the need for a series resistor, unless the voltage supply is substantially higher than the nominal forward voltage of the LED. But I digress. I vote for the resistor. If the resistor wins the vote, you have to ship me the LED. ;`>
@31redorange085 жыл бұрын
That's not true. When a component gets too hot, it starts to burn, thus producing smoke.
@praveermadhupushpa65184 жыл бұрын
@@31redorange08 you racist
@robmckennie42037 жыл бұрын
another cool application for the voltage/current trade-off is high voltage power lines. the higher the voltage, the less current you need to transmit the same power. less current means less voltage drop across the power lines, and lower voltage drop means less power being consumed by the lines themselves. the benefit of this is twofold, it's more efficient, and you don't need as much material to make the cables.
@MrXxCKKxX7 жыл бұрын
And yeah, Thomas Edison lost the bet that DC>AC. Shame on him
@j58920007 жыл бұрын
but doesn't high voltage also cause high current. i thought current was reactor to how much volts you had so even if you dont need the high you'd still get it right? im learning so please forgive my ignorance.
@gyrgrls6 жыл бұрын
The last time I dealt with transmission lines was underneath a Ford van. I had to throw my coveralls away, because I couldn't get rid of the red stains.
@gyrgrls6 жыл бұрын
@NoVaKane Yes and no. Whenever we work across a fixed load, then current is directly proportional to voltage. Kirchoff's law. But in practice, higher voltage results in lower current during POWER TRANSMISSION. You see, the higher voltage is stepped down before and during DISTRIBUTION. So, if the end user (subscriber) has a 240 volt service, rated at 100 amps, that would translate to 1 amp at 24 KV, or 100 milliamps 240 KV. Now, if we were to apply 240 KV to the same load at the subscriber, everything plugged in would try to draw 1,000 times the current. All the magic smoke would escape. But since we are dealing with VA (Volt-Amperes), instead of current, the two factors cancel out, and we deliver the same number of VA over the entire system. Since transmission lines run at 100 times or more volts than the distribution grid, and the power load is the same, the current in these HV lines is less, since the voltage hasn't been stepped down yet. I hope this makes sense.
@umr4h1385 жыл бұрын
@@gyrgrls Forgive me if I sound like an absolute idiot but I thought that the voltage is what pushes the charge and current is the flow of charge so if the voltage is high, surely the current would be high too?
@kameronmanzon6940 Жыл бұрын
These videos have simplified a concept that can and have been overcomplicated. Thank you for your amazing explanations!
@alexanderk5399 Жыл бұрын
was searching for a set of videos to explain the basics of electricity. Thanks to your great examples and visualizations now I have a basic understanding of all of that! Thanks, man, these are some great videos!
@Afrotechmods Жыл бұрын
You're very welcome!
@ayush_stha3 жыл бұрын
I had vague knowledge but had these questions in mind which this 5-minute video cleared 4 years after my computer engineering, Wow
@Shark11036 жыл бұрын
I like how you encourage the viewers to build stuff from the beginning. Not just theories, like school bullshit.
@josegonzalez-20113 жыл бұрын
I just got this after 10 minutes of thinking- and it honestly feels like i have been blessed with the power of knowledge from an ancient arcane scroll
@ifyou88753 жыл бұрын
195 right
@imqwerty51713 жыл бұрын
I learned more from these videos than my formal education. Thank you! :)
@davidleef18946 жыл бұрын
I feel like i'm never gonna understand this stuff, and I so want to!
@thetooginator1534 жыл бұрын
David Leef - That describes my motivation pretty well! I would only add that it’s REALLY fun when we understand ANY of it and use that understanding to make fun gizmos.
@james770113 жыл бұрын
This is pretty simple for me
@rmorgan4533 жыл бұрын
I feel your pain. This stuff can be tricky to understand. There are at least five different videos on KZfaq explaining watts. Different teachers often explain things in different ways. Watch all five of of them and very likely one of them will make sense to you. A watt is defined as the amount of energy (disapated as heat) of one amp of current flowing through one ohm of resistance in one second.
@awcy71413 жыл бұрын
@@rmorgan453 I feel like the easiest explination would be to think about it in terms of joules used per second. You start with the basic Coulomb, that would be the charge of 6.24 * 10 to the 18 electrons. Then you go to current, that is measured in Amps. 1 Amp would be equal to 1 Coulomb (the charge of 6.24 * 10 to the 18 electorns) passing through a point (that you chose to measure) in one second. Next you have to think about Voltage in terms of Jules per Coulomb. Every Coulomb has the rated voltage in joules. Combining them all you get to power that is simply joules/second. The amount of energy something uses every single second is what power is, and that is called watts for sake of simplicity.
@chubzeee13 жыл бұрын
Agree! It’s like Greek.
@johnfitzgerald42746 жыл бұрын
Excellent series of lectures for beginners in electronics. Highly recommended. I hope there will be more to come.
@ArsyadKamili7 жыл бұрын
More basics pleasee... I've done my basics, but it'll be so much better to watch your videos! I kinda get another view, and it's just... good. Just make sure to step slowly, so that viewer can understand things like capacitor, inductor, op amp, then more advanced.. So people in 2-3 years from now, know that if they want to learn EE, they can learn from the very basics to the very advanced theories by watching the playlist. DON'T STOP MAKING VIDEOOOOSS!!
@Afrotechmods7 жыл бұрын
This might end up being the last video I make unless I get corporate sponsorship or donations start pouring in.
@Afrotechmods7 жыл бұрын
I had a Patreon. >99.9% of my subscribers weren't interested, plus I even had some fake pledges with fake credit card numbers.
@laharl2k7 жыл бұрын
the problem is you dont make enough videos to atract people. If you ever thought of making money making ideos, you should give Dave's (from EEVBlog) talk a watch. He talked about how he does it and one of the things he said was exactly that. Make videos, make them often, keep the channel alive so that people wont think you are dead and so it will keep the channel in their minds. It's just a matter of not making a video for a couple week and most people will have already forgoten about you and only when you come back will they recall "oh, the guy that made videos!" My recomendation is at least making a video once every two weeks. It doesnt have to be big, but once you start growing and getting money, money will give you the motivation to make more and not get frustrated in the process. As a comparison, dave makes 3 to 4 videos a week and has done so for the last 5 or so years. You have like 75% his subs, and little less than the view rates he has. What you are lacking is a corporative organization to take advantage of it like dave has.
@acklan37 жыл бұрын
Sad, but understandable.
@ArsyadKamili7 жыл бұрын
+Afrotechmods Whatt? I thougt you have over 400$ on patreon?
@kanabalize7 жыл бұрын
This channel is the best
@maninarush21124 жыл бұрын
its hard to overstate how helpful these videos are. you are a hero
@Afrotechmods4 жыл бұрын
Thank you!
@dillon43215 жыл бұрын
Man these electricity basics videos are soo useful to me. Thank you
@PoseidonXIII2 жыл бұрын
Amazing series man, this really helped bring it all together for me.
@andystuart46674 жыл бұрын
This was so much easier to follow than Voltage. I rewatched the second half of the voltage video about 10 times, and that motor example even more
@Afrotechmods4 жыл бұрын
Voltage is literally the hardest thing in EE to understand. By the time I graduated university I'd say only half the people in my class truly understood it. It takes time but once you work with voltage enough everything starts to click.
@andystuart46674 жыл бұрын
@@Afrotechmods Thanks for replying. I had trouble understanding 1V 1.8A is 1.8J. Easy maths, but hard for me to reckon with more than 1J per second. Great videos
@shashwatsangle74606 жыл бұрын
You are the best teacher one needs to have,for explaining these stuffs. Thankyou
@ishanpujari21712 жыл бұрын
"watching things go in fore is fun" ~ I absolutely admire your videos. They are super informative. Thanks
@vizmohanan7 жыл бұрын
All your videos are well explained and easy to understand. Great job you're doing here. Thumbs up for that. I just subbed, liked, shared and followed this. :)
@selvoselvo14 жыл бұрын
1:11, amps into coulombs per second Real-world example, if you use air conditioning with declared power of 3500 watts, and your city grid is 220 V, that means that your air-con device will pull 15,9 amps through the electric wire to put it to work. (3500/220 =15.9), simply the declared power of an electric device tells you how many amps it is going to need. A 500 watt PC will suck 2.27 amps through the wire. All power consumption in ampers sum up, and if it exceeds the Fuse limit, it will break the circuit for your own protection. You can make a mistake by putting the higher value fuse than it is the capacity of the specific wire. In that case, it will let the higher ampers pass...and the wire will melt, burn and cause a fire.
@MyBigThing20107 жыл бұрын
dude these videos are burning up the blank pages in my notebook! ...I kinda love it when I find a KZfaq channel that makes me fetch a pad and write stuff down...
@atif15387 жыл бұрын
pls don't tell me i'm the only one who prefers electron flow over conventional current flow. i really want to understand electricity and all those components but because almost all the explanations are in conventional current flow i get confused. i'm a more visualizing person, i want to understand what the electrons actually do.
@chanakyasinha80465 жыл бұрын
atif i too, we can rock. 😀
@jeremyhall93465 жыл бұрын
If you are getting confused then you should probably learn the conventional way and go from there.
@madhuradharme91314 жыл бұрын
Same here
@ProlificThreadworm4 жыл бұрын
That's like being confused cuz you don't know how many bricks are in a kilometer 🤷♂️
@itamarlevy54734 жыл бұрын
You just neet to imagine that in convertional current positive charges are flowing instead of electrons
@ashwin_mahajan10 ай бұрын
Appreciate the videos. Still find it difficult to make sense of voltage, and keep up with concepts like Power, but will go through the playlist for a few times to keep things in mind.
@ramanathan7904 жыл бұрын
Super super very very useful and informative. Many more simple things for beginners like me. Great job good simple english. Appreciated
@maksympt13 жыл бұрын
For people that don't get it: Think of electricity as water flowing through a pipe. Volts is water pressure. Amps is pipe diameter. If you increase one or the other, you get more "power".
@krysthaljoybut-ay43553 жыл бұрын
Power is the rate at which energy gets supplied, or used up and instead of saying joules per second, we have a unit we use for power, called the watt. Also 1 watt is equal to 1 joule being transferred. Voltage and current that leads to power. Voltage and current can be combined in different ways to get the job done.
@barbarian6823 жыл бұрын
You cleared almost every previous doubt I had, Thank You 💪
@astifcaulkinyeras7 жыл бұрын
Does V x A = W only apply to DC and linear AC loads? When does power factor come into play? Also, why are transformers rated in kVA and generators rated in W?
@MrXxCKKxX7 жыл бұрын
No, that formula applies to any current form, but when you have a current that changes throughout the time you need advance math to solve it. And we often use different units because of convenience and habit, when you measure how much energy you used in your house in a month for example you mesure it in kWh instead of Joule, it is easier that way. Thats why
@RiddimDubstep7 жыл бұрын
You're wrong. You can't measure power in AC as in DC. If you just simply do P=VxA will only show you the Apparent Power, not the real power. In order to explain why transformers are rated in KVA, you need to know what POWER means. There are 3 types of power: 1. Real Power (W), Reactive power (VAr) AND Apparent Power (KVA). In order to measure the power in AC, you need to know this: u = U (sin omega t + fi 0) i - I(sim omega t + fi 0) Note that "u"/"i" and "U"/"I" (in capital) are not the same. U/I - The voltage/intensity displayed on the multimeter (Peak voltage/intensity) u - the real voltage. If you get U x A = The peak power (apparent power, also rated in KVA) - Now you know why the transformer is rated in KVA. That's the peak power they can support. If you put a load bigger than the maximum KVA, you will most likely burn it. If you get u x a = The real power (KW or W). You need to know the real power on generators so you know what you expect the load will do. If the load is bigger than the real power, it will burn the generator. Basically generators are not rated in KVA because you don't need to know the peak power. The peak power is there for only 50Hz/60Hz (50/60 times/s) but the load you put on the generator it is a constant load. "fi 0" is the resistive inductance or the capacitive inductance. This is a better mugshot (pun intended) about this explanation: www.sgs-engineering.com/wp/wp-content/uploads/2015/09/beerkva.jpg
@RiddimDubstep7 жыл бұрын
Forgot to say: Any variations between u x A or U x a you will get the Reactive Power
@RiddimDubstep7 жыл бұрын
Also, sorry for any mistakes if there any but English is not my main language and is not that easy to translate physics terms from Romanian to English and also, I only slept 2 hours in the past 2 days....
@jeffsmithfpv7 жыл бұрын
Riddim Dubstep your the man. That was explained very well. Helped me out a lot. Thanks
@maxximumb7 жыл бұрын
Thanks for another great video.
@shehzadkhan75705 жыл бұрын
understanding in a very simple way. thanks
@AsoolTech3 жыл бұрын
I'm trying to buy electrical incense burner with 40 Watts then I found another one with 80 I didn't know the overall difference but at 4:20 i realise the difference thanks for the video
@MrFrazierNation5 жыл бұрын
YOou and Paul at Learnelectronics are very inspirational.
@yaswanthreddy31664 жыл бұрын
Lovely videos... With practical examples and good explanation
@vijayrajkumar90897 ай бұрын
Fantastic video!! and great series on electricity basics. Easy to understand. Thank you. One small typo in video at 1:06 - "... no engineer is going to covert volts into joules/coulomb and amps into joules/second.. " . You meant amps into coulombs/second?
@Afrotechmods7 ай бұрын
You are correct of course. RIP KZfaq's annotations feature :*(
@ahmedyousif99142 жыл бұрын
Leonardo Rodrigues Leonardo Rodrigues 5 years ago (edited) Thanks for the high quality videos. Instructive and amusing. I have been working on a project in which I'll have to use a current limiting circuit to protect my DC power supply. Can you make a video about the different choices for this case? I don't know if it would be popular enough, but is just a suggestion. Cheers
@leorodesp7 жыл бұрын
Thanks for the high quality videos. Instructive and amusing. I have been working on a project in which I'll have to use a current limiting circuit to protect my DC power supply. Can you make a video about the different choices for this case? I don't know if it would be popular enough, but is just a suggestion. Cheers
@ahmedyousif99142 жыл бұрын
are you alive
@matthijndijkstra256 жыл бұрын
These videos are very good at explaining this, thanks!
@Sicktrickintuner3 жыл бұрын
So what you are saying is the resistor in that setup can take a maximum of 42.23V reduction in that circuit to max out at .25Watts
@rgmoses2189 Жыл бұрын
I'm curious to truly know if an electrical component going up in smoke is tied more to current or power as from what I've learned having too much current while keeping a low voltage but the same wattage is a good way to lose power while frying whatever the power is going through simultaneously
@Wizely243 жыл бұрын
Good im found all of your video im now gonna learn some electric Thank you very much
@samuelchamel29517 жыл бұрын
Awesome! Just what the doctor ordered.
@irisjanssen10212 жыл бұрын
great videos! thanks!
@3xAudio4 жыл бұрын
Thanks for sharing its helping with my latest projects
@prosp3421 Жыл бұрын
I'm really grateful. Quick question though; what causes the resistor to go up in smoke?..voltage, current or power? If power, that should mean a low voltage, and a high current could generate such heat
@Afrotechmods Жыл бұрын
Power. And yes low voltage high current can do it if the resistance is low enough.
@prosp3421 Жыл бұрын
@@Afrotechmods thank you, sir. I'm a big fan, though a medical student 😅
@crackmaster887 жыл бұрын
dude you are very good explainer :)
@muhammadrafiqulislamkhan69944 жыл бұрын
so much enjoyable and informative. thank you.
@Umenemo6 жыл бұрын
So let's let's say that a microwave draws 1000w of power per second. What confuses me is that what part of the power is spent. So only some of the energy is turned into microwaves. And we pay bills in watt hours, so it is obviously not drawing 3.6million watts per hour. So my question - is the power drawn different from the power that is dissapated?
@lunafoxfire6 жыл бұрын
I think you have your units mixed up a bit. It doesn't draw 1000w per second, because watts are already in "per seconds". It just draws 1000w, which means 1000 J per second. So leaving a 1000w microwave running for one hour means that it uses 1000 watt-hours of energy (since it's 1000w of power running for 1 hour).
@rambhaubhawar60494 ай бұрын
very Good informetion of e.c Unit given.
@hitandrepair7 жыл бұрын
Great video as always
@magica2z2 жыл бұрын
Very good and awesome channel. Thank you.
@janeclinton80092 жыл бұрын
I was having a similar case but thank God It has been fixed
@sanjaypatil25323 жыл бұрын
Good progression on concepts in ur videos :) 1 error in calculating the power given to the burning resistor (P=V×I) 137 volts × 20mA = 2..74Watts. Why did u take the roundabout way of V×V/R Vsquare by I ?
@daniellukonis7 жыл бұрын
Thanks for these videos!
@37prakhar7 жыл бұрын
Another great tutorial.
@JuiceBoxBoiii6 жыл бұрын
Thank you This is straightforward.
@moneyaccount97756 жыл бұрын
Helped me a lot, Great Video!
@mrcassid7 жыл бұрын
Great video, as always
@liza712344 жыл бұрын
Awesome lecture 💡
@esbendayo7 жыл бұрын
The arrow doesn't indicate the right formula at 2:57It should instead be the one saying I = V/R
@muttaBonda_07 жыл бұрын
Im looking forward for more of your videos...
@tommyallehamn95437 жыл бұрын
+Afrotechmofs fantastic man! I wanna mention something fail which most of the people don't know about. For example that LED lamp which u showed rated as 40 W, but the issue is, when we gunna power it with some power supply like a transformer (not a battery), we have to calculate how much the transformer will drag. Depending on the bad efficiency of the most of transformers we'll find that the power which is needed to power the LED is about the double, about 80 W and that's horrible! Am I right? Thx
@ethanmye-rs7 жыл бұрын
Tom Tommy transformers are just about the most efficient possible way to convert electricity. That being said, do you mean voltage droop on the transformer, where unloaded, it's x volts, but with a load, it .5x volts?
@tommyallehamn95437 жыл бұрын
+Ethan M thx for helping first! Then, no I didn't mean the voltage drop. I meant the efficiency. As I know η=(Vo*Io)/(Vin*Iin). I have a LED strip which is powered by a cheap 12V 10A transformer, so I did a few of measurement and I got theses numbers, for the input I=28.8m.A and V=220v so P=6.3W. And for the LED strip which is the output I got 244m.A and of course V=12v so P=2.9W................... so......... η= 2.9W/6.3W = 44% !!! Is it fail? Did I forget considering anything? THX again!
@tommyallehamn95437 жыл бұрын
The Traveler 10% okay, but in my case it's 56% !!!
@zurabayasticker14436 жыл бұрын
thanks bro.. the best channel !
@craiggybear18075 жыл бұрын
Okay, I've got that down - I'll be moving up to big boy pants shortly. :)
@prajwalgautam34406 жыл бұрын
Great job explaining.
@erarman19916 жыл бұрын
awesome series
@salmantechnologies2824 жыл бұрын
well sir i appreciate of your teaching method nice
@hdckdsadd6 жыл бұрын
how a light bulb can "draw" something? in this case current (electrons per second)? a higher wattage light bulb has a filament with a lower electrical resistance? edit: 2:26 ---> why through the light bulb flows fewer amps at a higher voltage than the led setup which has a lower difference in potential energy but through which flows more amperes?
@gastonpardo39466 жыл бұрын
love your videos! thanks a lot!!
@PBS-nm1uu5 жыл бұрын
love your videos please recommend a good app for the resistors calculator thanks
@teltri7 жыл бұрын
I like your videos.
@landrowgamer64467 жыл бұрын
i've loved your vidio it help me a lot thanks master you r great
@yaj1266 жыл бұрын
4:40 Damn right, just check out ElectroBoom's recent channel explosion
@genuino-qo5yq7 жыл бұрын
Amps not joule per second coulomb per second*
@easycommuter21473 жыл бұрын
(at 1min 12 secs)
@OzmoMac7 жыл бұрын
what about very high voltage like 10kv should I play whit that
@Afrotechmods7 жыл бұрын
What could go wrong?
@OzmoMac7 жыл бұрын
Afrotechmods nothing :)
@astifcaulkinyeras7 жыл бұрын
Sure, but only from a 46kV rated bucket lift.
@KeeperOfSolitude7 жыл бұрын
You can, but only once
@gyrgrls6 жыл бұрын
Yes. In fact, I am working a new line of sex toys. Stay tuned.
@kirovkhan96665 жыл бұрын
Good video, well educated indeed
@Reza-nu9gn7 жыл бұрын
Awesome Video!
@CL-ty6wp2 жыл бұрын
so using those style of resistors is basically bleeding off energy as heat to 'dilute' the currents overall energy?
@henrykitunzi41306 жыл бұрын
Thanks. It was really helpful..
@crawdini76416 жыл бұрын
Good information. Thank you.
@MariusQusnerius4 жыл бұрын
I am very new at all this, so I need to ask: When the resistor burned, how come the LED kept giving light? I would expect that, when the resistor burned it stopped working, which means it stopped "choking the amps", and so too many amps would flow into the LED and it should have burned also. And, yet, the LED kept giving light. Am I getting something wrong?
@glennmurts62647 жыл бұрын
This is an awesome tutorial 😉😉😉😉😉😉
@Electricalpower600 Жыл бұрын
Good work
@salimr47183 жыл бұрын
you said that Ohm's law is a linear relationship between current and voltage provided the resistance is constant. However, in the experiment you are referring to at 0:15, when you set up the voltage to 1, a current of 1.8 Amperes was displayed. But when the voltage was increased to 2, the current was 2 Amperes. This is not a linear increase. Why did that happen?
@Afrotechmods3 жыл бұрын
Because the motor is not a linear load. Not all loads are linear and therefore not all loads follow ohm's law.
@salimr47183 жыл бұрын
@@Afrotechmods 4 years after and I still got a reply!!! WOW! Your content is AWESOME!!! Your 3 videos on Current, Voltage and Power are the best I have found on the Internet and better than any textbook. I might be pushing my luck but there are are few aspects of basic electricity that I have not been able to grasp even though I have scoured the Internet for explanations. I would be most grateful if you could shed some light on these. Even electrical engineers seem to contradict themselves on some of them. 1. What is the difference between charge and electrons? 2. Is electricity a flow of charge or of electrons? If it is a flow of charge, and charge is a property of the electron (and not a physical element, as some people seem to put it), how does charge flow? And is the definition that "electricity is a flow of electrons" wrong? 3. When voltage is increased, are more electrons (or charge) being sent from the battery, through the wire and to the load, or is the same number being sent but at a faster rate? One site even claims that more energy is getting transferred to the electrons while their number and speed remain the same. 4. If at a vertical cross-section of the wire, there is x number of electrons/charge, and the battery is sending, say, x+100 of electrons/charge, will the wire not be able to handle this and will consequently burn, just like a resistor or fuse? And if the battery sends x-200 electrons/charge, does this mean that, if the voltage is increased, there is room for about 200 more electrons/charge to be sent? Or is this an erroneous over-simplification? 4. If the battery is providing more energy to the electron/charge, how is the electron/charge storing this energy? Is the electron vibrating more, for example? 5. What causes the pressure (potential difference/voltage) in the battery? Is it the difference between the NUMBER of electrons at the negative terminal and that at the positive terminal, or is it the AMOUNTof energy that the electrons/charge hold at the negative terminal with respect to the positive terminal? Please do continue to make videos. Praying that you are in a generous mood to educate this ignoramus :-) Thanks beforehand for your replies.
@Afrotechmods3 жыл бұрын
@@salimr47181) Charge is a fundamental property that some types of matter have. And electrons are a type of matter. i.pinimg.com/originals/9f/57/7b/9f577b9a840c4c8bd1870523bb44de3a.gif 2) It depends on how you define "electricity". It is technically more accurate to say it is the flow of charge. "Electricity is electrons flowing" is just a simplification to try get people's heads around basic concepts before delving into quantum physics. If you really want to get into more detail, electrical current isn't actually even the flow of charge, it is the propagation of an electric field which results in the movement of charged particles. Sparkfun has a more physics-ey explanation that you might find helpful. kzfaq.info/get/bejne/sJ6hmct3vdDXoqs.html The rest of your questions suggest to me that you are looking for answers in the wrong place - most electrical engineers usually don't look at things at that low a level, you want to be learning from physics and chemistry teachers. That being said, they are excellent questions so definitely keep searching for the answers!
@salimr47183 жыл бұрын
Thank you for your answers and suggestions. Your explanation about charge and electric field helped me a lot. I now understand what you mean, although the aspect of what exactly increases and changes when voltage goes up is still unclear. I will keep on searching for answers and, if I find them (and remember), I will surely post them here. On a side note, this quest for answers has also helped me understand why I (and other people like me) find it hard to understand physics. It comes down to how we approach the subject matter. We need too many answers right at the start and we are serial learners; we find it difficult to move on to the next topic unless we have fully understood the current one. This assumes that there is an answer to every question we raise, which is often not the case in science (and I am discovering that there might not be a single human being on this planet who fully understands all aspects of electricity). This also requires a teacher with in-depth knowledge, excellent teaching skills and tons of patience. This is exceedingly rare.Those who do well are those who can treat what they do not understand as black-boxes, or are satisfied with analogies, and are able to connect the black-boxes together to get an overall picture of the subject. And they move on with their lives! I believe that this is one of the trait of a good engineer. For people like me, that one thing that we do not understand might consume our days and nights (as it is happening with me currently). I wonder if I can train myself to learn otherwise. Thanks again.
@j58920007 жыл бұрын
does low voltage like change the current to be high or is it when the voltage is lower then current, essentially the electrons just siting there with no where to go almost and just start to heat up like pressure building up on a hose?
@xuau2082 жыл бұрын
in experiment at 3:26 (140V battery, 3V LED, 6800 ohm resistor), what if the circuit only had resistor (without LED), with 1/4W resistor, the current must be lower than 20mA and the resistor didn't smoke ?
@SumoLife5 жыл бұрын
This might be a stupid question but I'll ask it anyway... Why won't electrons flow the opposite way if connecting the battery the wrong way, ending in the same result?
@Tomyb157 жыл бұрын
This is something i've been confused about for some time: Is the amount of heat a lightbulb or any cable with resistance gives off just measured with VxI? Because I saw a video some time ago about why we use ac current instead of dc current, and the reason was that it is very easy to transform low voltage with high current to high voltage and low current (and viceversa) with ac, and that it was more efficient to deliver electricity with a high voltage and low current. Also some videos here on youtube about contact welders show that they rip open a microwave transformer and mod it to get a low voltage with a massive current from the wall. The point is, if it doesn't matter if the current or the voltage is high as long as both multiplied yield the same watts, then why is that? (the high voltage on power lines and those contact welders that people made that need a lot of current)
@Papperlapappmaul7 жыл бұрын
_This is something i've been confused about for some time: Is the amount of heat a lightbulb or any cable with resistance gives off just measured with VxI?_ Yes, resistive loads convert almost 100% of electric power to heat. _The point is, if it doesn't matter if the current or the voltage is high as long as both multiplied yield the same watts, then why is that?_ Power lines have a certain resistance and according to Ohm's law there will be a voltage drop if current flows through a resistor. So the lower the current, the lower the voltage drop. V=RxI Let's say the power line has a resistance of 10 Ohms and you want to deliver 1MW. At 10kV you'd have to pass 100A trough the power line, so the voltage drop across the conductor would be V=10Ohms x 100A=1kV and therefor the power loss would be P=1kV x 100A=100kW. If you use a higher voltage for the same task, lets say 500kV, you'd only have to pass 2A trough the power line. So the voltage drop would be V=10Ohms x 2A=20V. That gives you a power loss of P=20V x 2A=40W. For spot welders made from MOTs the opposite applies. Normally these transformers have a primary winding with let's say 1000 turns which sees mains voltage and a secondary coil with roughly 10 times the number of turns so they step up the voltage by a factor of 10. If you want high current at low voltage, you replace the secondary winding with a low number of turns of very thick and conductive wire, lets say 10 turns. That would step down the voltage by a factor of 100 and on 220V AC you'd get 2.2V on the secondary. Now the primary winding is typically rated for something like 800W, so you draw 3.6A from the socket while drawing roughly 360A from your secondary winding because P(in)=P(out)-P(heat). I hope this cleared things up a bit for you. If you still have questions, feel free to ask.
@Tomyb157 жыл бұрын
swiss Oh now I understand. Thank you! That was very clear. I completely missed that the heat given off by the resistor is given by the voltage drop times the amps, and that the voltage drop increases with the current passing through it. I think you cleared all my doubts about it! :D Just out of curiosity, are you an electrical engineer, or studying something related to electronics?
@Papperlapappmaul7 жыл бұрын
Ciroluiro You're welcome. I'm not an electrical engineer by any means, just kind of a jack of all trades who doesn't mind sharing his knowledge. I've also been called a smart-ass many times and I hold that title with pride.
@tarikovictariko91236 жыл бұрын
thanks for the explanation
@j58920007 жыл бұрын
forgive my ignorance. why does,when using a lower voltage then the item is rated for, cause current or current draw increase? if current is dependent on volts in the first place.r am i not understanding something. my fan says 120 volts but battery is 12 volts. ive read current will increase to compensate but that doesn't make sense to me unless there is an internal feature of the fans circuitry that causes this to happen?
@network_king7 жыл бұрын
I work in I.T but tinker with this stuff. I hate how they size UPS in VA yet almost every PC, server, switch, etc they say it in watts. Like say a 24 port POE switch has a PSU that takes 700 watts. Then you have to find the right UPS for that and those are usually in VA which makes things kind of confusing, frustrating and a pain. I wish the UPS s would just say recommended max load 100 watts. then you know that it can run a 700 watt switch fine, or maybe 2 in some situations.
@network_king7 жыл бұрын
I always heard NEVER plug anything with a motor or laser printer into a UPS. I heard a story of some tech needed an outlet plugged in a mini vacuum to the UPS and blew the UPS up. Laser printer I think is more an issue of wattage that the fuser draws.
@gyrgrls6 жыл бұрын
jtech0 The reason they rate these in VA is because of the maximum CURRENT RATING of these devices. Say, you're pulling 1000 VA and using 746 watts. All is well, if your power supply is rated at 1000 VA. You are drawing one horsepower. But your POWER FACTOR is only 0.746. And, in real life, it gets worse. You are lucky to have a 0.65 power factor... not in the UPS device itself, but in the LOAD. Then, again, it all depends on what devices comprise your load... IHTH
@gyrgrls6 жыл бұрын
Are you kidding? These fuses and breakers are rated in AMPERES. PERIOD. Nothing to do with wattage. Wattage refers to the actual work consumed by the load, and in certain applications, is a fraction of the VA product. You have a lot to learn. Actually, I lied to you. Breakers and fuses DO have a MAXIMUM voltage rating, but it has nothing to do with initial blowing or tripping. Instead, it is a safety specification, in order to ensure RELIABLE circuit interruption on overload. But still: a 20 amp fuse is designed to open at 20 amps, no matter what the OCV. Put a million volts across a blown fuse, however, and it's liable to arc over.
@sblantipodi7 жыл бұрын
Hi. On my wall there are sockets hat are able to output 1500W. If I plug a small lamp to the wall it get 10w from the 1500w available. If I plug a bigger lamp it get 100w from the 1500w available. Who is to decide that a lamp can get 10 or 100w? Is there a resistance on every lamp that permit to a small lamp to not be burned by the power of the wall socket?
@sus67882 жыл бұрын
Can you please make a video about hertz and AC/DC current?
@techsinc5 жыл бұрын
I think you need clearer explanation for the 120V AC (I believe this is RMS voltage) driving light bulb compared to LED requiring DC.
@kennyowz7 жыл бұрын
can I fix multiple LEDs (assuming each needs 3V) together WITHOUT a resistor, as long as [amount of LEDs] x 3V = [the V in the battery I choose].......?
@CrazyCoupleDIY6 жыл бұрын
Thanks a lot for all the tutorials :)
@abdulrahmanembabsha86253 жыл бұрын
Me: 2:35 that robot is crazy 😛 I think 💭 he was made by Einstein Einstein: who are you takin about(he is crazy 😛)
@mubeenahmed18586 жыл бұрын
I have a question If we are using 60watt bulb in 220v then amphere is very low but the normal home wire electricity will give more than that how the bulb work in high amphere