Air Compressor Shed Build Pt 2
Рет қаралды 54,735
3 жыл бұрынIn this one, I build the frame. Put up a roof, and get some siding on it.
I am also learning to edit as I go. So I do apologize for the roughness of the video.
I am still amazed that the lumber for this build was only $40! Well, the framing lumber that is.
Please Like and Sub. Thanks for watching!
@DailenGunter 2 жыл бұрын
So I've watched probably 20 lean-to shed videos and this is the first that recognized that there should be flashing between the house and the shed. I hadn't even remotely considered that. I'm really impressed. Well done!
@mytimebytony2315 2 жыл бұрын
I’d gladly pay 40 bucks any day for that! Thanks for the vid.
@ponyboytek5688 Жыл бұрын
Damn good tutorial video sir!👍
@1nv1c7u5m4n30 3 жыл бұрын
Hellz to the YEA!! Pt 2, LET'S GO!!
@daver681 11 ай бұрын
That is nice but you really needed to use treated lumber on the bottom against the concrete and you need to put some vents up near the top of the walls.
@ewildgoose 2 жыл бұрын
How does the air get in... Assuming you are consuming a decent volume of air, then you need some airflow into the compressor and for cooling? No?
@macstinkerhole 2 жыл бұрын
It gets plenty of airflow from around the doors. They are there to A) keep people and animals out and B) to keep weather off the compressors. Last summer we broke 100°F a few times and never had any issues with overheating. The compressors have a fan on the motor to move air. They seem to move enough for them to stay within operating temp.
@ryanc3219 2 жыл бұрын
Was there a reason you didn't just lower rafters down about an inch so you could have had the shething and shingles under the existing drip edge of the wall. Would have saved buying flashing and tar 🤷♂️
@macstinkerhole 2 жыл бұрын
I was just trying to have a good slope to the roof. I wasn't really concerned with lining things up with the shop siding, probably gonna change out the old wood siding for something that seals better.
@jddownes1 2 жыл бұрын
What type of siding did u use? Looks great!!!
@macstinkerhole 2 жыл бұрын
I used the cheapest 4x8 sheets that Home Depot had at the time. I'm not sure of the brand, but going on a year now and it's all holding up well.
@fatboy6154 2 жыл бұрын
How much cement did u use
@macstinkerhole 2 жыл бұрын
I'm sorry for the late reply. It was alot is the short of it. I started with few bags I had left over from a fencing job, and then it ended with the cars rear suspension screaming for death till I got home with if I remeber 10 more 60lbs bags. So I really don't remember without scrubbing through alot of footage.
Garreth Collins
Рет қаралды 128 М.