Airfix's

Рет қаралды 9,072

Жыл бұрын

Hey guys! Hope you enjoyed this one as much as I did! Let me know what you think down below!
-
Thame Valley Scale Model Club: www.thamesvalleysmc.co.uk/
-
#hobby #scalemodels #aircraft #usaf #airforce #airfix #f86 #sabre #thehuff

Пікірлер: 60

@robertmunoz7543 2 ай бұрын

I would suggest sealing base metallic coat before masking I use testors metalizer sealer which I bought lotsa bottles of before it was discontinued.😁 Jman

@machmodels 2 ай бұрын

Interesting! Haven’t heard of that before👌🏻

@markfranks1329 17 күн бұрын

I'm a little late to this one, but that's a great build as always. This is a nice model, no doubt, but it's obvious the bean counters have had a say on this one, and corners have been cut. It's not a patch on earlier releases such as, say, the Meteor F-8, Javelin, and Spit PR XIX. Airfix dropped the ball on this one. They had the opportunity to snatch the laurels from Hasegawa, who, in mo, still hold the crown as the best 1/48 F-86 currently available.(Nothing wrong with Academy's offering, either). Once again, lovely build.👍

@machmodels 8 күн бұрын

Thank you very much Mark! I think I have to agree with you, but for them I hope and think it has all been part of their learning curve👌🏻😁

@jamesgriffiths3176 2 ай бұрын

Nice Sabre. Re metallics, I use Aclads over their own gloss black primer and have never had a problem with paint lifting.

@machmodels 2 ай бұрын

Thank you for letting me know! I’ll have to try it out

@bobsmodels123 Жыл бұрын

Video quality and build is getting better every time man! Love a Sabre!

@machmodels Жыл бұрын

thank you dude! thanks for watching the content!! i do also love a good sabre :)

@neilhaas Жыл бұрын

Love the Canadair Sabre F.4 nice jet plane ❤😊👍☺️🤗🇨🇦🇨🇦

@machmodels Жыл бұрын

same Neil!! i love it as well :)

@joesanchez979 Жыл бұрын

Great looking kit 👍

@machmodels Жыл бұрын

thank you! glad you like it :)

@thepresident1971 Жыл бұрын

Excellent build 💯

@machmodels Жыл бұрын

thank you very much dude!

@flyboy9367 Жыл бұрын

Nice build and finish 👍

@machmodels Жыл бұрын

thank you very much!

@joesanchez979 Жыл бұрын

Excellent job 👍

@machmodels Жыл бұрын

thank you bud!!

@RazedModeling Жыл бұрын

Great work mate, those decals looked to be a huuuge pain

@machmodels Жыл бұрын

thank you dude! yeah those decals kicked my butt a bit🤣

@RazedModeling Жыл бұрын

@@machmodels I’m surprised you didn’t order a new set after that dragon🤣

@machmodels Жыл бұрын

i was so close to getting some new ones🤣

@ChristianSchroter 7 ай бұрын

Hello mister mach.of course your work deserves a thumb up.and i will give him to you. Thank you for sharing. With sticky greetings.christian

@machmodels 7 ай бұрын

Thank you sir!🤙🏻

@lesthiele4921 Жыл бұрын

Anoth er great looking build sir, of a very iconic aircraft, best regards from a Kiwi living in Australia 👍👍👍👍

@machmodels Жыл бұрын

thank you very much! i must agree the sabre is one of the icons of aviation!

@paintsmallthinkbig Жыл бұрын

Great job buddy, NMF paint jobs can be a right pain but yours looks good..love the yellow really makes it pop

@machmodels Жыл бұрын

thank you bud!! glad you like it, i must agree the metal and the yellow really compliment each other!

@jcwoodman5285 Жыл бұрын

Very cool!🤗

@machmodels Жыл бұрын

thank you! glad you like it :)

@goforitpainting Жыл бұрын

Looks cool.

@machmodels Жыл бұрын

thank you!! i’m glad you like it!!

@septiccalling8341 Жыл бұрын

Yes, I do like that! 👍🏻

@machmodels Жыл бұрын

thank you!! very glad you like it :)

@carycosgrove8898 8 ай бұрын

nice work!

@machmodels 8 ай бұрын

Thank you dude!✌🏼

@darthhokum 11 ай бұрын

Perfect ❤️

@machmodels 11 ай бұрын

Thank you so much!

@tomburley Жыл бұрын

Nice build - just FYI the national insignia changed when the US Air Force was established (formally it was the US Army Air Force) so the Mustang national insignia are from the USAAF era - the addition of the red linear line denotes it as USAF.

@machmodels Жыл бұрын

thank you for letting me know!! i did think they looked a little different than usual but i couldn’t put my finger on it!! thanks again :)

@neilhaas Жыл бұрын

I like this jet plane F-86 Sabre very nice jet. I want this jet plane for myself. 🇨🇦🇺🇸🇮🇹🇬🇧 Those air forces. ❤😊👍☺️🤗

@machmodels Жыл бұрын

thank you for the comment Neil! I must agree with you the sabre is a very nice airframe :)

@robertmunoz7543 2 ай бұрын

USAF was at a transition point so technically the earlier insignia isn't totally incorrect!🤔 Jman

@machmodels 2 ай бұрын

Whoops!

@willthorson4543 Жыл бұрын

You definitely need to add a wash. At least that.

@machmodels Жыл бұрын

thanks for the suggestion! when looking at references the panel lines on the sabre didn’t really stand out to me… looked very smooth so that’s why i opted not to define them even more using a panel wash!

@richardbailey3343 Жыл бұрын

I didnt know the usa used canadian built f86s😮😊

@machmodels Жыл бұрын

i might be wrong but i believe it was more designed by the canadians and built under contract by the north americans!!!

@richardbailey3343 Жыл бұрын

@@machmodels ok so they are built in canada by canaduans so they can stick us markings on them makes perfect sense

@machmodels Жыл бұрын

honestly i’m just as confused as you🤣

@richardbailey3343 Жыл бұрын

@@machmodels it would have been easier for you to say in using a mk5 sabre to make an f86f version.🤔🤔😆😆😆

@machmodels Жыл бұрын

goodness yes that’s a much better way of wording it! thank you very much :)

@davidmartyn5044 Жыл бұрын

The F-86 was the best fighter of that time. You complain about the lack of detail in the cockpit but don`t add any extra parts? You sound like you can`t be bothered. Also, the U.S. military added a red bar to the national insignia from 1947 you should have added that. I`ve seen some behind the scenes videos, and for all details the have to design and make, it adds to the cost.

@machmodels Жыл бұрын

hey david, so my general approach to models for youtube videos is to be “out of box builds” as I want to provide an accurate representation of what the manufacturer provides or what the decal manufacturer provides. To say that I sound like I can’t be bothered is rather short sighted of you as I don’t think you understand the amount of effort that goes into making these sort of videos. But I appreciate the feedback :)

@machmodels Жыл бұрын

and also, when it comes to pricing etc for details how can tamiya deliver so much more in a similar price range (F16C) with so much more detail? i’m genuinely curious?

@davidmartyn5044 Жыл бұрын

@@machmodels I suppose it`s how serious you are about your modelling. Do you want 10 parts for the cockpit or just basic components? Some people buy a kit and add parts to upgrade the basic kit, some don`t. There are a few youtubers that were invited to Airfix, and its not as big an organisation as you might think.

@machmodels Жыл бұрын

I agree with upgrading a kit when it’s perhaps a little cheaper but when your paying about £50 for a kit I would expect there to be more than adequate detail in the cockpit especially as it’s 1:48… perhaps that’s just me being too used to tamiya kits though.

@skipschauer5535 Жыл бұрын

Nick picker......