I’d love to try Nuprol, but I've never found this gas here in Brazil! And if I find it someday, won’t be cheap! :( Nice video, good job!

Caio Gonçalves brasil é foda... kkkk

Reds Brasil só é bom pra quem faz coisa errada... airsoft sem nota, sem ponta laranja, etc... kkkk

pois eh kkkkk

Diablo it's my go to

Slowly but surely! Grazie! ;-)

Thanks bud! I appreciate that! ;-)

the nuprol 1.0 is suitable on guns with metal Cart around in a temperature ranging from 20 to 30 degrees ???

Facundo Corradini I use mapp gas in my gbbr’s and it has a noticeably sharper recoil impulse and cold weather performance. All of the Nuprol gases perform identically to propane, which is why so many KZfaq reviewers were disappointed by it. Run mapp gas through a gun and you won’t be disappointed!

I do run MAP Pro ( *not* MAPP, that's a different gas that has been discontinued for ages and would certainly destroy your gun). Map Pro is simply propene (aka propylene). That's what 99% of red gases out there are made of. I would be surprised if 3x was any different.

Facundo Corradini Have you tried the 3.0? I will admit I have not. I’m not about to waste $20 on a scam. All of the KZfaq reviews I have seen on the 3.0 are underwhelming. Nugentgl has a great video comparing propane, mapp, and co2 and the mapp is noticeably different from the propane.

Red gas is (or was) HCFC-22. MAPP and MAP pro are both trade names of the same gas.

Actually Nuprol never claimed to sell different types of gases, they even have their formulation on their cans but most of the players not being very knowledgeable when it comes to this kind of stuff assumed green, red and black were actually types of gases rather then different propane formulations, that's my experience at least. They can totally sell the 3.0 and 4.0 as it's gust ethane enriched green gas, nothing wrong with that. I couldn't actually find Abbeys' formulations but looks like the Vertex is in the same category of the 3.0 and 4.0 as far as pressure and optimal temperature range. I'm sure even this Guarder Power Up still is propane based, black gas is just a name thrown out there afaik!

Dizzyfatpigeon The msds sheets are online for abbey gases. They legally have to declare what’s in the product. All just scented propane with a scam marketing label on it.

Verso il periodo estivo, superati i 20° in campo penso sia meglio passare al 144a sulle Tokyo Marui poi dipende anche da altri fattori come quanto effettivamente usi la replica, se gira molto allora sicuramente passa al 144a in estate.

Chupacabra Outdoor la "uso" prevalentemente come sistema di backup, quindi quasi mai. Sono di Napoli e da noi già fa molto caldo. Quindi dici (restando su nuprol) 1.0 estate, 2.0 per il resto dell'anno?

@@CHUPACABRAOUTDOOR the nuprol 1.0 is suitable on guns with metal Cart around in a temperature ranging from 20 to 30 degrees ???

Thanks bud! It really depends on how much are you actually using it but 3.0 and 4.0 are definitely over the top for a TM gun, I've seen people running green gas like the 2.0 on them just fine during winter periods! No need to go higher than that IMO!

Thanks dude! I'll let the TM nuts in my team know :D

Ghost Warriors Airsoft All nuprol gas is just propane, so you will be fine for a while until the slide wears out. It will wear out but you should get plenty of usage out of it.

the nuprol 1.0 is suitable on guns with metal Cart around in a temperature ranging from 20 to 30 degrees ???

What I actually said is that they're all propane based but, the Nuprol 3.0 and Nuprol 4.0 have a small and increasing percentage of ethane, that's what boost up pressure!

Facundo Corradini Because they are all the same gas. They perform identically. Nuprol is just cashing in on the biggest scam in airsoft, scented propane.

no, they are not. Each one of them is actually a different gas, and their working temperatures are wildly different. You can use 4x at 0ºC while 2x won't work at that temperature at all. On the other hand, at 30ºC the 2x will perform perfectly fine while the 4x will literally bloat your mags and break them beyond any possibility of repair. 2x is green gas, which is scented propane. 3x is most likely just scented propene. and 4x... I have no idea what that is. But they certainly are different gasses.

Facundo Corradini There’s no way they’d get away with exporting a flammable gas into the US in bulk with fraudulent labeling. I have yet to get my hands in the MSDS sheets for nuprol, but I have seen them for abbey supply, and all their gases are just propane. So with the labeling on the nuprol cans and the composition of competitors gases, I’m sticking with nuprol must be just propane. If you own cans of nuprol gas, just measure the pressure at 20C with a gauge. Easy way to test the composition. Nuprol also claims the cans hold 1 liter of gas while only being 10.5oz. Which is lighter than both propane and propylene, so the whole thing screams “scam” to me anyways.

well, most "green gas" manufacturers has been getting away with importing green gas into the US (and every single country in the world where airsoft is played) declared as CH2 FCF3 CH3, which is not only a non-existent formula but also an impossible one as it violates the CnX2n+2 rule of saturated hydrocarbons. So there's that :p

Interesting! I've actually never heard someone complain about the silicone oil messing up the accuracy, always had pretty steady shots as well but it should be interesting to do a comparison! Thanks!

Wont do much in pistols..but ive using GBB M4 for 8 years..used all sorts of gases..Nuprol is worst! Gaurder power up is best in my eyes..but Mapp pro is way forward in cold.

Chupacabra Outdoor Hopup functions based on friction. Lubricants reduce friction. Lube in the gas goes down the barrel and coats the hopup bucking making it less effective.