After spending an hour outside, thinking I could solve adjustment techniques on my own, I gave up! Thanks for tor short, concise, yet completely informative video!

Even 10 years later, this is a helpful video! Thank you!

Really well done explanation, especially on arc adjustment. Brief, insightful, thorough and clear. Thank you.

Rendio, Man, you are analyzing how these things work, I'm impressed! Marlex pvc 90's or Poly nipples that the heads thread onto are rated for leak free operation hand tight. By spinning the head you are tightening or loosening the head slightly on the inlet threads, not rounding the ratchet mechanism. Thanks for the comments and Good luck with the yard! JW

Best video on adjusting the Hunter PGP sprinkler. Thank you.

The best explanation for this model. Period.

That was really good. I'm revisiting a system I set up years ago in my yard and forgot all the PGP secrets! Thank you very much very good.

You are a good instructor. The best instruction out of 4 professional irrigation companies.

I watched several videos for this adjustment and you had by far the best. Thanks!

I should have had the installer guy show me how to adjust the right side arc stop on these PGPs since they don't clearly explain it anywhere that I could find on the Hunter website, but you answered my question visually. He set most of the system up great, but two of them rotate a bit too far onto the driveway. Thanks buddy. ;-D

Really good explanation. I wasn't aware that one can adjust the right arc by turning the whole turet - very useful and I wonder why this isn't described in the manual. Thanks for the video, old one but still useful :)

Thank you! Just what I needed and a very straight forward explanation.

Perfect explanation!! Not much talking

Great job on the video, the instructions are vague at best, but your directions were spot on, adjusted mine in a matter of 30 minutes after watching the video. Thanks, saved me a service call.

This is the most clearly stated of all. Thank you.

Excellent video. Very helpful adjusting my rotors.

Just what I needed to change the way the water goes. I video and greatly appreciate it.

Awesome video. Helped me a ton on a new system.

Thank you finally someone that explains in detail. I will try this and update once I get a chance, I do have one question if you don't mind, my two septic sprinklers have a sleeve that covers the body of the sprinkler, but it keeps breaking and waters gusher out, what can I do about this? I was thinking pipe insulation but you the expert and I thank you for your recommendations.

Great video, simple and complete. Thanks for sharing.

Hunter and Rain Bird are both great.

Thanks!! us girls getting it done....with your help!...Good clear instructions!

Very informative video

excellent video!!

Thank you Justin!

Thanks. Very helpful tutorial.

Thank you your instruction is appreciated.

Counter-Clockwise reduces the arc of sprinkler head.

Thanks. Great video. Lots of help

Great Video, Very Helpful Thanks

Thank you, sir, for the excellent job

Awesome vid, thanks

Thank you.

Great job! Best video by far!

Excellent explanation just I have a question, can we use the blue nozzles from the ULTRA in the PGP model? does the blue nozzles make the water curtain better than the red one's? thanks in advance

Excellent video Justin. Thank you for posting. Quick question ? Using the same sprinkler headas an example, mine stopped rotating but is spraying great. I can manually rotate it, but it won't rotate automatically. Any suggestions ?

Outstanding, thank you!

thx was very helpfull

excellent

Thanks, this helped.

Loved the video, but have a question about what did you use to cut the ridges in the PVC tool you made to unscrew the sprinkler head?

great tutorial

Very helpful, thanks!

I needed your video to figure out that the bow tie shaped end of the adjuster tool is NOT the end to insert through the hole with the bow tie out line. Nay nay, the bow tie tool goes through the circle, the Allen key goes through the bow tie. What is manufacturers logic behind the markings? Anyhow, I can now adjust the azimuth just as the presenter has shown. However, the Allen key is not finding anything at bottom of hole to engage. How common is it for a range adjustment screw to be missing or incompletely formed? My new head continues to shoot at max range until I can find out how to get Allen key engaged or I dig this new head out of the ground and try a different brand.

good

Great job

You said in order to adjust right stop, rotate the whole head but it looked like you only rotated the pop up riser.

Thank you!

How do fix the rotation of the head. Mine goes part way and then stops. I can manually turn it 180 degrees so I just need to rotate 180.

Justin, what happens if you try to adjust the arc (+/-) without holding the turret at the right stop? Also, it is okay to hold the turret in place at the right stop when the water is on?

Good video

Video actually starts at 51 seconds in.

I was trying to adjust my sprinkler head and turned it right then left a few times to see where I wanted it adjusted and now it wont arc left to right, it stays in one place. Is there something I did wrong that can be corrected?

I guess I am lost as to how to do the radius on the left side. The right side I understand but the left side is the side I need to do and I just don't see how it is done!

Thanks.

How can I get that plastic tool that you use?? Is there anything else I can use instead??

question, what flow insert is the best for distance and fan

I changed my landscape around from my original sprinkler install. I need my pgp to spray a little less than 90° or 1/4 spray pattern is that possible? Can I adjust the radius for 90° or less

...why would anyone loosen the housing to adjust either stop; as you loosen they connection to the line, it will only leak...?? Can anyone tell me how to do this correctly???????

One of my rotor heads won't move back once it goes to the left it just stops. I was regulating the flow of water with that one and got it where I wanted it and then it just stopped revolving back and forth. Can you tell me how to get it back to rotating again? Thanks!

2:04 You did not turn towards the plus

my rotor is set at 360 how do I adjust to do 180

How many gpm on 1hp pump

BEFORE YOU READ THE INSTRUCTIONS YOU CAN ONLY ADJUST THE ARC WITH THE HEAD OF THE ROTOR EXTENDED OUT. Simply, adjust the arc with the WATER ON to allow the rotor to extend up to make the adjustment by rotating the turet all the way to the right and then insert the tool into the opening to seat it and rotate it to the plus side or the minus side. Get your instructions in order Hunter and don't leave out the first step to allow all the other steps to follow. Get it? . It is like going for a test ride in a new car with no gas in the tank. Shame on you.

Hi, when you adjust the right stop, i notice you grab the shaft below the turret and then with a small amount of pressure adjust it left or right. Arent you still forcing those little teeth on the bottom of the shaft to move against the position they are wedged into? At this video they say adjust the right stop by moving the entire unit, ie grip the outside body and make it swivel by it moving on the nipple that attaches it to the pvc mainline. see here kzfaq.info/get/bejne/nsxmdtCJ0aiZnqc.htmlm47s At this video kzfaq.info/get/bejne/mpqTY6ybyt-9lZ8.htmlm13s it mentions a 2nd method, whereby you undo the housing and take out the shaft and turrent, then lower it back in with the right stop and arrow facing the correct direction. Your method seems to be a 3rd alternative, whereby one is ignoring the whole housing but just forcing that shaft to move a tiny bit left or right whilst leaving the turrent alone. I pulled out one of these shafts and there is teeth on the bottom of them, your method will slowly blunt or round off those teeth against the slight protrusions in the housing they wedge into? I assume those teeth dont do much but keep the shaft in one spot and not turning and maybe adjustments are so infrequent that it doesnt matter, even if technically speaking , one is rounding off the teeth with your method. Thankyou

It would be clearer if you didn't keep your hand in the way !

. .