Glad to hear that

Thank you for your kind words

The same ❤❤❤

So glad to read your comments. Unfortunately Breville won't help me in anyway as they are a big company without influencers. That's ok and this is my hobby too.

Thank you

Thank you

Thank you for your feedback.

Thank you so much

Thank you so much 🙂

Thank you

Thank you Allan. Glad to hear that 😏

Thank you

Thank you Sydju. Glad to hear that.

So glad to hear that 🙂

Thank you

Thanks for the feedback.

So glad to hear that and thanks for your great comment

Thank you for the kind words. Thanks for your feedback

Thank you

Thank you for your feedback 👍

Thank you JC 🙂

So glad to hear that. Thank you

You are welcome

Thank you 👍

Glad to hear that 👍

Thank you

Thank you for your kind words. 🙂👍

Thanks a lot

Thank you

I haven't experienced this issue. If you dial to steam (all the way), it shouldn't generate any pressure on the Grouphead. I suspect the steam wand unit may be failing. Anyway do a Descale and Clean cycle to rule out the calcium buildup as the culprit

@@AjusCafe if it is failing then it doesn’t say much for the brand as it’s only two years old.

I guess you’ve never bought a bad apple before. You must have extremely good luck. It doesn’t matter who made a product, there’s ALWAYS a chance something could go wrong with it. After 2 years, maybe you got a defective part or maybe it was user error not properly cleaning/descaling. When you purchase an item that’s expensive like this, you might want to consider getting an extended warranty. The Breville brand is amazing and seriously is the absolute best espresso machine for the money. Maybe you should contact Breville instead of KZfaqrs for more info. I’m sure they’d be happy to help 🤷‍♂️

Thank you

Is the light flashing OR solid ON?

@@AjusCafe solid

@@mytran499 If it's solid ON then you need to DESCALE. Follow this video to fix that kzfaq.info/get/bejne/j7WHlbyZnq7Xo5c.html

Welcome

That's normal. Your cleaning disk has a hole in the middle. Right? Some version doesn't have a hole and it blocks all water. Both will bring water up and into the tray to clean. All good.

Welcome

Thanks for the feedback

You are welcome

Thank you for the feedback

Thanks for the feedback

Thank you. Descale is different cycle compared to Clean cycle. And tablet is used for Clean cycle or Backflush. Assuming you are referring to Clean cycle, then Yes you need to Clean using tablet in Portafilter every 3 months atleast, in order to avoid coffee stain buildup. Even if the light blinks or not, you need to run clean cycle. Same applies to Descale cycle as well, where u use Descale power in the water tank.

@@AjusCafe I run the clean cycle every Friday plus thoroughly clean the grinder, filter head and froth wand. But I’ve never gotten the descale message I guess since I use filtered water always. But as you suggested, I’ll continue using the descale tablet every 3 months. Thanks again.

Thanks for the feedback. Thanks for subscribing...

So glad to hear that 👍

@@AjusCafe keep it up 😁💪🏽

Thank you

Thank you. Appreciate your feedback

Thank you

Thank you

Thank you Sara

Both Solution or Powder should work, if its meant for Espresso machine descaling

Got it, thanks so much..

@@gokhangok18 And here is a video Descale using Solution - kzfaq.info/get/bejne/acx-dNF-urelnGw.html Descale using Powder - kzfaq.info/get/bejne/j7WHlbyZnq7Xo5c.html

@@AjusCafe thanks for the links. I think I'll go with white vinegar as it's also written in Breville manual. Hope works well:)

@@gokhangok18 i wouldn't recommend vinegar though Breville mentioned that in 1st version of BBE. Later Breville itself mentioned NOT to use vinegar as it can damage silicon seals etc. So 2nd version onward you won't see vinegar in their manual. But nothing wrong in using it once in a while

Thank you

Thank you

You are welcome

Glad to hear that

You are welcome

If its solid ON and not blinking, then you need to do Descale cycle. Assuming your machine is version 2. kzfaq.info/get/bejne/j7WHlbyZnq7Xo5c.html

Thanks for the feedback

Here is my video that explains why and how to check - kzfaq.info/get/bejne/rNJ9m7WHupbUeoE.html

@@AjusCafe You are the man! my is 870 first generation=manually descale

@@dido196464 that's right! You could do manual descaling. It'll be similar to this descaling process kzfaq.info/get/bejne/bLajgMhl0rS-j6c.html

You are welcome

You are welcome

Once you remove the hopper,, there is a little cut just above the burrs facing towards you. That switch is not engaging. That's why the filter size is flashing. You can use something like a toothpick and press i to the little cut and see if it engages. Maybe just vaccum the top area and see if a broken bean is stuck.

thanks so much for your reply! im gonna do this on the weekend hope this will solve everything especially with the grinder!!

Does your blind disk have a hole in the middle and water slowly dripping though the Portafilter? Because some model of BBE has hole ans what you see half pressure is normal.

You are welcome

You are welcome

I always remove water filter when i do Descale. But no need to remove in Clean Cycle

You are welcome

You are welcome

Some cleaning disk has a whole, but there is enough pressure to clean backflush anyway. Either use cling wrap on your cleaning disk and use OR use it with pressurized basket. Its all normal.

Tanks

Flashing means it need Backflush OR cleaning cycle with tablet in Portafilter. If the light is solid ON, it means it need Descaling where you put Descale powder in the water tank and run that cycle

Yes. Less plastic is better

@@AjusCafe Thank you. Btw I have a Sage Barrista Express

@@peterbergkvist229 its the same 🙂

Sorry depends on which liquid? What liquid are you planning to use?

Breville Eco Liquid Descaler. Thanks

@@lalaland8881 Answer is NO. No Descale products should be used for Clean cycle. Either use Breville tablet OR Cafiza powder which is the highly recommended. In Clean Cycle you are cleaning only the coffee oils, old grinds stuck in backflush plumbing etc only. Descale is different and Descale cycle is for cleaning boiler and other components in your coffee machine.

Thank you

Once in 3 months on normal use. You don't have to wait for the lights to be ON. Thanks for watching my videos 🙂

You must be using first generation Barista Express, which shows only clean me light. In your case you should do Descale cycle manually. Do it every 3 months or every 6 months if you are using filtered water. Here is a sample manual descale on another machine kzfaq.info/get/bejne/bLajgMhl0rS-j6c.htmlsi=mGdGC5q3ZlNeSFfK

Not necessary, but its always good to clean group head mesh filter if you can, as there could be lot of deposits hiding there too.

If the light is ON (without blinking) that means its time to Descale. Do a Descale cycle. See kzfaq.info/get/bejne/j7WHlbyZnq7Xo5c.html

Thank you

Descale won't do both. You should run a Clean cycle too

High pressure is very normal, because you are blocking the flow of water through portafilter using the clean disk (silicon). This will generate lot of pressure up to max. Because of this pressure, the water will be drawn up through the GroupHead into the backflush outlet (which is by your tray below). This back flow will carry the cleaning solution with it, which ensures it clean all your coffee oils and old grinds stuck in there. Hope its clear.