How to Repair a DEEP SCRATCH in Car Paint (DIY)/ Ogrebotina na Laku POPRAVLJANJE

Рет қаралды 212,634

3 жыл бұрын

@Amd detailing
JOIN the channel to get access to benefits:
/ @amddetailing
The video is intended for both professionals and amateurs.
The video shows how to get rid of deep scratches without changing the part, paint, etc.
With a little care, you can do this at home for very little money.
We are here for you, follow us, comment, write what you are interested in and what you would like to see in some of the next videos.
Your AMD detailing
CONTACT:
For business inquiries: tataragicalen@gmail.com
SOCIAL MEDIA:
Instagram: / tataragic
Facebook page: / amdsarajevo
Facebook profil: / tataragic.alen
[NCS]
• / nocopyrightsounds
• / nocopyrightsounds
• / nocopyrightsounds
• / ncsounds
• / nocopyrightsounds

Пікірлер: 216

@irfanmalik5519 2 жыл бұрын

Very good job 👍 Those who love there cars can understand how these scratches hurt them.

@philtucker1224 9 ай бұрын

I saw this technique (using bondo to protect the surrounding clearcoat) and really want to try it for myself now...- A superb & gifted repair! Well done and thank you for sharing 🙏👍

@gorandobric3875 Жыл бұрын

Svaka čast, ovo je stvarno retko videti da čovek koji je profi, svoja iskustva i znanja deli sa drugim ljudima! Svako dobro u životu prijatelju...

@Amddetailing Жыл бұрын

Hvala prijatelju uzivaj

@zarkodimitrov8357 2 жыл бұрын

Bravo majstore! Svaka čast na tvom radu, zaista impresivno!

@Amddetailing 2 жыл бұрын

Hvala prijatelju😉

@ljsites Жыл бұрын

I don’t know how many videos I’ve watch on fixing paint scratches. They all look to easy to be true. This is the first technique that really make sense. Nothing worthwhile is easy. Thank for sharing your skill.

@Amddetailing Жыл бұрын

thank you, I made the channel different from others where the real situation is shown without hiding it enjoy

@niazahmad705 Жыл бұрын

Can you list all these products which you use

@Derricky007 2 жыл бұрын

Svaka cast, ovo jako rijetko neko hoce sa ostalima podijeliti. Kapa do poda. Nema sta, sve najbolje u buducem radu.

@Amddetailing 2 жыл бұрын

Hvala prijatelju

@Anoymus985 Жыл бұрын

@@Amddetailingwhat’s the needle thing u use mate do u have a link to it

@Amddetailing Жыл бұрын

a dental needle,you have on ebay

@Anoymus985 Жыл бұрын

@@Amddetailing u have the link for it my friend

@Anoymus985 Жыл бұрын

@@Amddetailing what is the needle size u are using friend

@ML-eg9vm Жыл бұрын

Good job! 👍 For sanding a shim-mask for example the Devilbiss Shim-Mask could be useful for protection.

@alper507 Жыл бұрын

Expert Job ! Great Work...thank you

@glosart Жыл бұрын

Świetna robota 👍

@richardhowle7844 7 ай бұрын

👍

@patrikgalina2275 3 жыл бұрын

Majstorski odrađeno, svaka čast 👏

@Amddetailing 3 жыл бұрын

Hvala prijatelju😉

@patrikgalina2275 3 жыл бұрын

I sam se bavim detailing-om, al ovo što sam vidio na tvom kanalu je next level.

@Amddetailing 3 жыл бұрын

Hvala brate ako sta zapne tu sam imas me na fb Alen Tataragic

@inekelassooij840 Жыл бұрын

Prachtig gedaan top job 🤩

@edokulovic8299 3 жыл бұрын

Svaka čast 👏👏

@Amddetailing 3 жыл бұрын

Hvala

@MsLeonstar 2 жыл бұрын

amazing work bro, looks very good! greetings from Mexico!

@Amddetailing 2 жыл бұрын

Tnx friend

@teddee9938 Жыл бұрын

A million likes and a thousand thanks 👍🏼

@Amddetailing Жыл бұрын

Tnx bro

@bendzola1 2 жыл бұрын

Top, majstorski nema sta 💪

@Amddetailing 2 жыл бұрын

Hvala😉

@TheDrivers97 3 жыл бұрын

Svaka čast kolega, izuzetan rad, mnogo truda uloženo, rezultati su odlični!

@Amddetailing 3 жыл бұрын

Hvala brate😘

@vlademirbenevides9850 Жыл бұрын

Olha só, ficou perfeito...... Parabéns.....

@Amddetailing Жыл бұрын

Tnx

@studiosimko1638 3 жыл бұрын

Vidi se da treba vremena i vještine da se uradi kako treba. Posebno je dobro sto se cuva originalna boja i ne farba se kompletan panel. Svaka cast!

@Amddetailing 3 жыл бұрын

Hvala prijatelju

@maxfriedenberger8043 9 ай бұрын

awesome job

@shamieghbehardien2710 2 жыл бұрын

Well done. Looks tops

@arjenvisser7271 2 жыл бұрын

Sick.! Holy Sh*t Nice work 👏👏👏👏👏

@Amddetailing 2 жыл бұрын

Tnx bro😉😉😉😉

@ko6uta133 2 жыл бұрын

Много трудно изглежда за обикновения човек , поздрави супер клип 😊

@Amddetailing 2 жыл бұрын

Hvala

@williandetailersjb4797 3 жыл бұрын

It's great! Perfect! 🙂👏👏👏👏👏👏👏👏👏👏🙂

@Amddetailing 3 жыл бұрын

Tnx friend

@sergiorodriguez4851 2 жыл бұрын

Excelente trabajo, saludos Mexico

@Amddetailing 2 жыл бұрын

Tnx bro

@krikorvoskerichian9740 2 жыл бұрын

Very good job 👏

@bboyairrick 2 жыл бұрын

Wow this is amazing.

@Amddetailing 2 жыл бұрын

Tnx

@MA-bq8yg Жыл бұрын

Wow 🤩

@notmywerds 11 ай бұрын

Base: clear: hardener 4:2:1 ? Why is it good to add the clear into the mixture? It is more durable? Thanks, great work!

@randykuhn3596 3 жыл бұрын

Crazy lol. Awesome stuff

@Amddetailing 3 жыл бұрын

Tnx bro

@NERO-ez1mn Жыл бұрын

AMAZINGGGGGGGGGGG!!!!!!!!!!!!!!!!

@Amddetailing Жыл бұрын

Tnx bro

@HACK.gaming Жыл бұрын

Wowwwww

@razer192 2 жыл бұрын

Amazing

@Alshather-auto-detailing 3 жыл бұрын

Good work brighter

@Amddetailing 3 жыл бұрын

Tnx bro

@krikorvoskerichian9740 2 жыл бұрын

Nice job 👏

@Amddetailing 2 жыл бұрын

Tnx my friend

@pedersen3077 2 жыл бұрын

Nice work..... came out invisible👍

@Amddetailing 2 жыл бұрын

Tnx bro and welcome to my channel

@F_-so2bi 2 жыл бұрын

Great job, I wish you all the best

@Amddetailing 2 жыл бұрын

Tnx friend😉

@davitpornpongapisith8099 2 жыл бұрын

What is a body kit (soft) and where I can find it? I wanna improve my skill. Do you think you can be my mentor? Thank you

@mpower1226 10 ай бұрын

What type of putty did you use as masking surface?

@Santiago-je5ki Жыл бұрын

Amazing!

@Amddetailing Жыл бұрын

Tnx

@tyranelewis7763 Жыл бұрын

Wow!!! it pays to be patient. great job

@Amddetailing Жыл бұрын

Tnx friend

@DinoZametica 3 жыл бұрын

100% 👍💪

@inspektor. 2 жыл бұрын

Poštovanje, odličan posao ! Vredi truda i sačuvati prvu boju ! Postoji li sličan servis u Srbiji ? Koliko košta i traje ovakav zahvat ?

@Amddetailing 2 жыл бұрын

Ne znam za Srbiju a cijena zavisi od dijela koji je ostecen

@mensud0000 Жыл бұрын

Ja sam vidjeo samo baza da se nanosi ..a sta je sa lakom?..Veoma lijepo..svaka vam cast

@Amddetailing Жыл бұрын

Zamjesana je baza lak i herter zajedno

@steviezxr Жыл бұрын

Im fascinated by that blue filler step. It seems genius…….

@mikeb1039 Жыл бұрын

+1 - is it just to show you when everything is finally flat?

@kodyhogan3568 Жыл бұрын

@@mikeb1039 its more of a 2 parter. So first it protrects the paint outside of the scratch. As youre sanding youre going to be sanding down clear around the scratch along with flattening the newly added paint on the chip. Second as you said it acts as a guide coat which will allow you to see if the paint is leveled or ot.

@awalk5177 Жыл бұрын

I agree that filler protection is a brilliant idea to protect the surrounding paint.

@telmolourenco1437 Жыл бұрын

Can you try this trick with other colors? Black is the best color to match. I will like to see this in trick for example on a two stage color when you need pearl.

@TubeWatcher Жыл бұрын

Pearl is a tri-coat. You can't match tri-coats that way, you have to paint the entire panel. Basecolor, Pearl, then the clear coating.

@mikeb1039 Жыл бұрын

Nicely done. So is the body filler just to show you when it's level? Very interesting.

@Amddetailing Жыл бұрын

Yes that's right

@mikeb1039 Жыл бұрын

@@Amddetailing brilliant!

@maciejmatyszewski3473 3 жыл бұрын

Very very good job!!! 👏👏

@Amddetailing 3 жыл бұрын

Tnx bro❤

@BMH1965 9 ай бұрын

It is a lot better and cheaper just to respray the entire bonnet given the time taken to do this work.

@syedsaadali8488 11 ай бұрын

how long will the polish last?

@litokkt2212 4 ай бұрын

Hi great job..Is the blue paste putty for plastic?

@Amddetailing 4 ай бұрын

it is not, but it is soft for sheet metal

@daxworkandfun3650 3 жыл бұрын

👍👍👍

@erminklisura3238 3 жыл бұрын

👌👌

@ertugruldemir1902 2 жыл бұрын

How to you know you dont sand trough the base coat

@wild8757 2 жыл бұрын

Do you have to use the two-part clearcoat with Hardner? Can you spray some clearcoat that’s in a can in a cup and mix the paint with that?

@dujevideka1230 Жыл бұрын

It's enough just to mix some hardener in basecoat.. Like 4:1 is plenty

@alexanderschindler9714 Жыл бұрын

@@dujevideka1230 4 pieces basecoat and 1 pieces hardener?

@dujevideka1230 Жыл бұрын

@@alexanderschindler9714 yes

@OfficialSIRTRAPRELOADED Жыл бұрын

@@dujevideka1230 Hi mate, I have a non metalic waterborne uni color car. Can I also add hardener in the waterborne color? If yes how much? Got some paint left and want to fill some stone chips. Thanks

@gufiaito69able 2 жыл бұрын

Awesome job, but i cant find that blue putty to protect this procedure

@_GRVR 2 жыл бұрын

Pretty sure its bondo with body filler hardner mixed in, basically autobody filler 👍

@experience80 5 ай бұрын

what is the name of blue paste?

@Imflightmode 2 жыл бұрын

Guys he changed the panel. allow it, can never get this result

@nullnoob Жыл бұрын

@amd_detailing is it possible you could please list the products use? I have a somewhat deep scratch from a bike hitting the side of my car - I'm hoping to replicate this process. Mostly interested in the blue putty that was in use. Thank you! Keep up the great videos!

@Amddetailing Жыл бұрын

the base, the coating and the hardener are fine, you also have similar problems on my channel that we solved by filling, so you can watch each video with an explanation

@nullnoob Жыл бұрын

@@Amddetailing mostly was interested in the products used - the blue putty do you know the brand name by chance?

@Amddetailing Жыл бұрын

Mipa soft body

@YootubeUK Жыл бұрын

@@nullnoob Any body filler will do. By adding it when you block the area down you're less likely to go low on the surrounding areas. As long as you make sure you use a flat block and take the whole area as level as you can, you should be allright. Also it's a good visible indicator as quite you're progressing. Nice repair @Amd detailing! :)

@brookboybrookboy935 3 жыл бұрын

How you guys deal with compound residue on the edges?

@Amddetailing 3 жыл бұрын

by grinding look at the clip carefully everything is written

@kaloyanhristov1693 Жыл бұрын

May we fill the scrach with color base and then to use a spray clear cote above?

@Amddetailing Жыл бұрын

it is possible, but it is safer to mix everything together

@kaloyanhristov1693 Жыл бұрын

@@Amddetailing Thank's! Greetings from Bulgaria

@HOPE-iq3qh Жыл бұрын

Druže,moli te za pomoc.Nov sam u ovome.Dobio sam uz Einhell polirku nosač sunđera od 180 mm,ali sam čuo da je to preveliko.Koju mi veličinu nosača i sunđera preporučuješ za poliranje celog auta polirkom...150 mm ili manji?Takođe da li je za poliranje ogrebotina i oštećenja dobra veličina nosača i sunđera od 80 mm?Znači da li bi te dve veličine bile odgovarajuće t.j optimalne za rad...poliranje celog auta i poliranje ogrebotina i manjih oštećenja ili su po tebi bolje neke druge dimenzije?Takođe još jedna bitna stvar...koliko je bitan sam kvalitet sunđera...t.j. da li je dovoljno kupiti one Womax u WobiHouse koji su jedno 4-5 puta jeftiniji od Sonax ili Ewocar sunđera?Ili je ipak bolje kupiti Sonax ili Ewocar ili možda ShineMate sunđere?Koje ti preporučuješ za Hoby varijantu t.j. za poliranje samo mog ličnog automobila?Hvala unapred...

@Amddetailing Жыл бұрын

130mm i 150 mm ti je potrebno ,mada vise 130mm a sundzeri nekad rade bolje ti jeftiniji od brendirani sve zavisi od laka na autu tako da uvijek je potrebno imati vise njih i traziti kombinaciju koja radi

@HOPE-iq3qh Жыл бұрын

@@Amddetailing Hvala puno.Sve najbolje...

@HOPE-iq3qh Жыл бұрын

@@Amddetailing Uzeo sam Hobi Rotacionu Einhell polirku,Ewocar paste i sunđere.Od sunđera sam uzeo crveni t.j, srednji i bordo za finiš.Iako sam čuo pohvale za Ewocar paste i sunđere...sa crvenim sunđerom i njihovom jačom pastom Havy cut...često probijem i lak i farbu.Poludeo sam. :( Ipak treba praksa i detaljniji savet vas koji ste duže u ovome.Ne može to tek tako da se radi.Sigurno treba znati kada pritisnuti,kada polirati samo težinom same polirke...bez pritiska i kada prestati sa poliranjem.Mada i ova polirka ima minimalnu brzinu od 1000 rpm t.j. obrtaja što nije malo...čini mi se.I ne bi trebalo ići iznad 1100-1200 max...koliko sam provalio.Problem je što ne znam kada da stanem sa poliranjem i da li uopšte treba praviti bilo kakav dodatni pritisak na polirku!?

@steviezxr Жыл бұрын

What happens if you just use clear coat on a scratch? I suppose it just seals over it and the scratch is still visible through the clear coat?

@Amddetailing Жыл бұрын

nothing will happen, you have to apply the paint

@barryjohnson127 10 ай бұрын

How you don't go through the factory lacquer I don't know unless you have it relaquered beforehand. 😢

@junjja 2 жыл бұрын

What is the body kit for safe operation?? Could you give me product name what you used it? I mean the blue things.

@Amddetailing 2 жыл бұрын

Mipa Soft (body kit)

@gufiaito69able 2 жыл бұрын

Can't find it anywhere 🤷🏻‍♂️

@pedersen3077 2 жыл бұрын

@@gufiaito69able e bay link

@gufiaito69able 2 жыл бұрын

@@pedersen3077 where?

@pedersen3077 2 жыл бұрын

@@gufiaito69able cant find a blue one....

@DanielLopez-yl6lx Жыл бұрын

Is that blue puddy a body filler? Bondo?

@Amddetailing Жыл бұрын

Body filler

@bboyairrick Жыл бұрын

The reason you mix clear and base is because it helps with hiding the scratch? Just trying to figure out why. Youre the only one that ive seen that does this but also only one to actually make a deep scratch disappear

@Amddetailing Жыл бұрын

On the channel you have a few more videos with explanations of why and how, and on my channel there is nothing that is set up, everything is shown as real as it is

@trento8397 Жыл бұрын

Be careful if your paint is thin, you could go down to bear metal with sanding

@LuisNazarioRatKiller Жыл бұрын

are mixing the clear and base coat 1-1? or are you using more base?

@Amddetailing Жыл бұрын

2:1

@LuisNazarioRatKiller Жыл бұрын

@@Amddetailing thats 2 parts clear 1 part base correct? you want more clear than color?

@Amddetailing Жыл бұрын

@@LuisNazarioRatKiller base 2 clearcoat 1

@LuisNazarioRatKiller Жыл бұрын

@@Amddetailing 👍👍👍

@MS-yq4id Жыл бұрын

Jel mora ic herter kad se mjesa baza i lak skup je, sta ako ga pomisam s bazom bez i probam?

@Amddetailing Жыл бұрын

Herter je ucvrscivac za lak mora ici herter jer se lak bez njega nece osusiti ni za 100 godina

@antoniocorona9328 Жыл бұрын

True. He did n is not same spot for that u need Bando n paint all the part

@Amddetailing Жыл бұрын

look below which letters were made 😉

@MrApaHotel 2 жыл бұрын

You could shave of the excess paint with for example Mirka shark blade or Mirka mini file, then polish it. If you are lucky you don't need any wet sanding.

@wild8757 Жыл бұрын

Too deep

@ssaafur Жыл бұрын

I’d agree. The process in the video is fine, but a nib blade would have cut off the primary high spots, cutting sanding time down. I use putty in a similar way. Thank you for sharing.

@derekbelton5932 Жыл бұрын

We’ve used this technique in the collision industry for as long as I’ve been in it well over 30 years

@modernlegend_gaming Жыл бұрын

and ur point???

@godalmightyismysavior197 Ай бұрын

Hey bro how do I contact you? I live in hawaii and I have a job like this coming up

@Amddetailing Ай бұрын

we heard each other on instagram

@bill6023 8 ай бұрын

Love the instructional video, however hearing that music makes me think I'm at a high school dance or riding in the car with my daughter 😅

@stanrock8015 Жыл бұрын

I'd like to know how long that whole process actually took

@Amddetailing Жыл бұрын

before it took 24 hours due to drying, now it takes 2 to 3 hours because I use a UV coating that dries in 5 minutes with a lamp, and you have a video about it on my channel

@razer192 2 жыл бұрын

What is the make of body filler you are using please

@Amddetailing 2 жыл бұрын

Mipa soft

@razer192 2 жыл бұрын

@@Amddetailing thanks for getting back what's the full product name I have found MIPA P35 Elastic Body Filler ?. On the buffing part is it a lambs wool pad and car polish thanks again

@razer192 2 жыл бұрын

@@Amddetailing can you tell me witch mipa they do a large range

@EchoMeToo Жыл бұрын

What kind of body kit blue paste is this? What is it called?

@Amddetailing Жыл бұрын

Soft body kit

@EchoMeToo Жыл бұрын

@@Amddetailing Who makes it? I can't find it when googling.

@Nodirm93 Жыл бұрын

After the fail, he didnt wanna waste the video. here we are

@tmuthafuckindixon Жыл бұрын

This is misleading

@chiva215 2 жыл бұрын

Why was the blue dough placed?

@anothercarguy2451 Жыл бұрын

So you aren’t sanding other areas. You can see what’s not leveled

@tr_g Жыл бұрын

And just like that at 7:09 red writing on the hood has disappeared magically as well!?

@Amddetailing Жыл бұрын

if you follow, you would see that the place where it is rough has been enlarged for polishing, which means that the red color is above that place, and you can see it at the end of the video 😉

@tr_g Жыл бұрын

@@Amddetailing 🪄

@cloudtocloud3982 Жыл бұрын

there is another , easier way, with the polish machine and 1000 sand paper, you remove the scratch, (using water of course )Then you use a 2000 sand paper, then you use a compound cream with the polish machine, then a polish cream, then you use a wax and it s like new!

@t-rodzgarage 11 ай бұрын

Very informative. great job , but the music sucks!

@TheZchauvin 2 жыл бұрын

What is the blue product?

@Amddetailing 2 жыл бұрын

Bodysoft

@TheZchauvin 2 жыл бұрын

@@Amddetailing thank you

@timcarter9146 4 ай бұрын

What was the point of the blue stuff just to hand it all away

@Amddetailing 4 ай бұрын

protects during sanding so that the factory coating does not break through while removing what you have filled

@harismehic6795 3 жыл бұрын

jel moze klip na sivoj boji

@Amddetailing 3 жыл бұрын

Siva boja se ne moze iraditi da se ne primjeti

@zoranorelj5526 2 жыл бұрын

Pozz jel samo na sivoj ili još nekoj drugoj pošto bih probao

@electrolatif 8 ай бұрын

Is it this true?!🤔🤔🤔

@Amddetailing 8 ай бұрын

yes, check out the other videos on my channel, there are plenty of videos on that topic

@electrolatif 8 ай бұрын

@@Amddetailing thank you very much i will try it

@sabino8734 3 жыл бұрын

what's the name of this putty?

@autoprofinish3453 3 жыл бұрын

I'd like to know too? Koj tip gita se koristi? Is it just fine filler?

@Amddetailing 3 жыл бұрын

Soft,mekani

@sabino8734 3 жыл бұрын

@@Amddetailing you are link for purchase?

@Amddetailing 3 жыл бұрын

I don't have any link for the car industry but it's soft that it's easier for you to work with it

@oneofthebest513 2 жыл бұрын

@@Amddetailing what is the name is that putty

@patrickzuljevic1286 3 жыл бұрын

Boja i lak se miješaju u jedno?

@Amddetailing 3 жыл бұрын

@milanpaunovic1429 2 жыл бұрын

@@Amddetailing i herter sve zajedno tako???Jel herter uzimas spori ili srednji??

@Amddetailing 2 жыл бұрын

@@milanpaunovic1429 da sve zajedno ako ne zurim normalni herter

@milanpaunovic1429 2 жыл бұрын

@@Amddetailing Kralj si probao sam drugaru danas ispalo je top samo ja sam tackao sitne tacke pa smirglao ali po tvom principu rada.Minimum minimuma se poznaje 😎😎💪💪💪💪.Samo neznam onaj git kad koristis jel ti ono mipa p 16 plava boja??

@Amddetailing 2 жыл бұрын

@@milanpaunovic1429 jeste sto meksi da ti je lakse kit skinuti

@Jassesme26 2 жыл бұрын

How much I have a keyed scratch not that deep but hurts me 😡😡 means people jealous.

@klb6453 2 жыл бұрын

I have 5 to 6 deep scratches on my drivers side door. Some douche in a white Ford F-150 pickup with big ass tires was parked next to me at the golf course parking lot today. I deliberately parked in a corner. I came back and the white truck was gone. And I saw gouges on my drivers side door. The gouges went straight into the metal. It looked like he used a flathead screwdriver too. Karma is a Biotch. Thank God we have auto insurance.

@eszekiistvan7953 Жыл бұрын

👋👋👋👋👋👋👋👋👋👍👍👍👍

@abubakarraksary 2 жыл бұрын

Sir is not done 10/10 befor and after some problem

@Amddetailing 2 жыл бұрын

since it is only polished and without sanding and thinning the varnish on pure black color and very hard varnish, this is more than 10

@abubakarraksary 2 жыл бұрын

@@Amddetailing it 5/10

@JIMFED63 Жыл бұрын

Would of been easier and less work to just paint the whole panel !

@OMGWTFITSJESUS 2 ай бұрын

to be honest, i have done the same but i ended up fucking up my paint next to scratch because of sanding. should i just put paint there also and start the job over? i dont understand how u guys can keep sratching on same spot so long and not going tru the orginal paint job. at the end its not all this hard guys the biggest mistake (i and mostly all of us make at the start) is we dont really put enough layers of paint. infact we put to few so the paint we retouched is below the orginal paint job. if you manage to put paint above the orginal paint job u can lvl it down to the orginal one and have a quite decent fix (im not saying u gonna get it perfect like the video :) ) if u fuck up like me where i put paint not above the orginal paint all over u end up fucking up the orginal paint job cus i kept sanding something that was actually lower then the orginal paint.

@abubakarraksary 2 жыл бұрын

Sir iam not satisfy

@Amddetailing 2 жыл бұрын

only you are not saturated, everyone has their own opinion

@abubakarraksary 2 жыл бұрын

@@Amddetailing sir but mini scratch must be show when you work joint of paint must b show i am working since 15 years i know some things about paint job and about detaling

@Jerzeyguy 9 ай бұрын

The man knows his shit !

@detailing.avang1 7 ай бұрын

😂😂😂😂 laying

@Randazler Жыл бұрын

first trick; buy a black car.

@Amddetailing Жыл бұрын

hahaha no need, it's cheaper to buy a black hood

@Randazler Жыл бұрын

@@Amddetailing yeah i guess if your hood is the only part of your car that ever gets scratched.

@kerimerdem11 2 жыл бұрын

This is fake. That is imposible.

@Amddetailing 2 жыл бұрын

Try😉

@M99pt Жыл бұрын

To much time.....

@Amddetailing Жыл бұрын

it is a protection against pebbles so that there is no crust, any stone that would hit would strip the paint

@M99pt Жыл бұрын

@@Amddetailing i forgot that point ,you have right , like an advice I think is faster to cut at the same leve with clearcoar using shark blade (we using to cut nibs in clearcoat after paint ,sand buff and polish)