guide on how to remove a 159 front bumper. this it also the same process for a brera. thanks
Пікірлер: 66
@evilsquirrel562315 жыл бұрын
Just ran into your channel in the past couple of days, some excellent stuff for an Alfa fan like myself :) Keep up the great work
@amremotewatching2 жыл бұрын
Just found this channel. Some seriously helpful videos, thanks ! ... and my local Alfa franchised dealer quoted me 4.5 hrs labour to remove the bumper whilst sucking air through his teeth. Meanwhile you've shown it can be done leisurely in about 5 minutes .... !!!
@daytonaaaargh4 жыл бұрын
thanks - I needed this video to look for the fog lights connector ... my repair shop didn't connect these and I thought I can make it myself now, but it seems it's not doable without removing the bumper
@nadzuk314 жыл бұрын
Just been quoted 65 quid for an hours labour to change the front grill.... sounds incredibly dear now that I've seen this 5 minute video!
@vincebagusauskas2784 жыл бұрын
The bonnet latch lever on that car is broken too! Just ordered a replacement, this vid will help with the replacement, which I hope will be easy.
@ItaliaAutos4 жыл бұрын
Yeah its easy.
@leewilliams98964 жыл бұрын
Love the channel great videos and guides! Although I am refitting a bumper to a spider and it just isn't flush where the bottom of the wing is. It sticks out on both sides and wondering if some clips are missing. I can see a hole on the inside of the wing but nothing attaches to it 🤦♂️
@ItaliaAutos4 жыл бұрын
just bad fitment or alignment.
@leewilliams98964 жыл бұрын
It was... The wings were both out!
@1BCamden5 жыл бұрын
thanks, I’ve been dreading this job.
@RVoogt Жыл бұрын
Just what I needed, thanks!
@Dzonatan2 жыл бұрын
Appreciated your video, thanks sir ❤
@ItaliaAutos2 жыл бұрын
Thanks for the comment.
@mehmetbugraozturk73815 жыл бұрын
Thanks for this perfect guide. But many 159's are also suffering from the gaps between scudetto and hood after removed&fitted the front bumper for some reason. I find it quite disturbing, I hope you will make a video to show how align hood and front bumpers.
@ItaliaAutos5 жыл бұрын
its just a case of a lot of fine adjustment to get it perfect.
@tobiaszrozycki854 жыл бұрын
Great Job mate, its really helpful cheers
@alexandrediogo17994 жыл бұрын
Your videos are just amazing! To remove the front grille, does it needs to take the bumper off? Also if it does, when the bumper is off the car is easy to remove the grill? Thank you
@ItaliaAutos4 жыл бұрын
you can do it by removing all the top screws but id just take bumper off as 9 time out of 10 screws are seized on the grill
@alexandrediogo17994 жыл бұрын
@@ItaliaAutos thanks buddy
@davidparkes57385 ай бұрын
Thanks!
@ItaliaAutos5 ай бұрын
Many thanks also.
@edLambshanks3 жыл бұрын
Useful video, thanks! I want to service / replace the bonnet lock on my Brera as the pull release catch seems loose / worn and takes an age to get hit or miss aligned just right to lift the bonnet. it looks an easy job to replace - just bolt off / bolt on right?
@overthinker96063 жыл бұрын
Hello. what about the fog light wiring cable. If there is no engine undertray, will it just hang there and scratch on the road? Or is there a way to tuck it in somehow? thanks
@ts37984 жыл бұрын
Very helpful, thanks.
@TheOrientalBoyz Жыл бұрын
Very helpful video!👍 Can I fit a brera fender on a 159?
@ItaliaAutos Жыл бұрын
Thanks. And yes it will
@TheOrientalBoyz Жыл бұрын
@@ItaliaAutos thank you 😊 👍
@Rzut-Oka2 жыл бұрын
thanks!
@ShoneTheGenije4 жыл бұрын
@Italia Autos Great videos. Just out of curiosity, are those wheels done in Plasty Dip, they don't seem like original Gun Metal colour that was on latter TI. Still they look good, might try that on mine.
@ItaliaAutos4 жыл бұрын
They had had a bad paint job at some point.
@viktorgeorgiev62302 жыл бұрын
Ty it was really helpful
@overthinker96063 жыл бұрын
what about the fog light cables? will they just hang down there if there is no undertray?
@ItaliaAutos3 жыл бұрын
Cable tie them up.
@zozoz86164 жыл бұрын
Thank you very much.
@TheLRider4 жыл бұрын
Love your videos, do you call those "bolts" star drive bolts that fix the headlight carrier and bumper to the cross member. I need to buy some new ones and need to know what size too ofcourse. Thanks and keep up the good work.
@ItaliaAutos4 жыл бұрын
Torques bolts
@TheLRider4 жыл бұрын
@@ItaliaAutos marvelous. What size sorry to be a pain🙄
@bogdangheorgitescu86983 ай бұрын
👍👍👍
@raftopoua5 жыл бұрын
Very nice video! Thank you!
@alfonsopla46334 жыл бұрын
Hi, thanks so much for this video. I think it is necesary first to remove the bonnet lock before the bumper. In some way it is attached to the bumper. Am I right? Great channel for Alfa lowers!!
@ItaliaAutos4 жыл бұрын
Hi thanks for watching. Not attached in any way to the bumper.
@alfonsopla46334 жыл бұрын
@@ItaliaAutos Great news!! Thanks for your fast answer. Best Regards
@davidvarela87393 жыл бұрын
Is this necesary to remove the headlights or could they be removed with the bumper on ?
@ItaliaAutos3 жыл бұрын
yes
@IVANRUFFINI3 жыл бұрын
Many thanks.
@Andrei-eb2du3 жыл бұрын
Can I fit a Brera front bumper on a 159?
@ItaliaAutos3 жыл бұрын
Yep
@Francis.Coppola3 жыл бұрын
Ottimo grazie 👏👏
@danman11494 жыл бұрын
My dad has one and I reversed it and ended up breaking the bumper and wheel arch and a part fell off and he was pissed off
@ItaliaAutos4 жыл бұрын
whoops.
@miracuysal40433 жыл бұрын
Thanks
@ItaliaAutos3 жыл бұрын
No problem
@sedlijumper46415 жыл бұрын
Perfect! Thanks!
@Praise_God3694 жыл бұрын
Can I remove the grill without removing bumper? Thanks
@ItaliaAutos4 жыл бұрын
nope
@Praise_God3694 жыл бұрын
@@ItaliaAutos thanks
@el1221le5 жыл бұрын
very practices infos...!!!
@sup3rbosseur5 жыл бұрын
Hi Can i remove the Headlight without remove the Bumper ?
@ItaliaAutos5 жыл бұрын
no as their is a bolt behind it.
@urosuric68504 жыл бұрын
Hi, im getting the "Parking help not available" warning. I went to a mechanic and he pluged the diagnostics in the car and it revealed that my front-right parking sensor isnt working like it cant register it. How do i change the sensor, and are there any specific ones i need to find like one with the same serial number etc. and to i need to reset the warning after putting a new one or will the parking assistance work immediately?