Just to warn everyone- These "auto lips" are a repackaging scam. On some civic forums about 10 years ago some guys came up with the idea to use garage door sealer as a bumper lip. All fit and EZ lip stole this idea and repackaged garage door sealer and sold it for A LOT more. You can buy a 9 foot roll of MD garage door sealer for 9.99. All fit charges you $80 for the SAME EXACT 9 foot roll. They just added 3m double sided tape and some screws. Dont fall for the scam. If you want to do this just buy a roll of MD garage door sealer for 9.99. Then buy a tube of gorilla glue construction adhesive with a caulking gun for about $12 for both the glue and gun. That way you can install it to stay put without drilling holes in your bumper. You'll have the exact same lip with better installation for $20 instead of $80. You're welcome.

Just installed this onto my car and I definitely recommend adding the screws. My kit only came with white decals, kinda wish I had the black ones so I could rep the company just on a lower profile. Other than that I love the All Fit lip and am debating on getting the side skirts and rear bumper now because its such a great product!

"its durable and its still holding up" right after installing it

you guys do know these are just garage door seals w 3m tape stuck to it....

Great video! Thank you. I bought the 2.5" ALL-FIT LIP KIT. Wanted 2" but only ez lip has that. I have edge trimming to do so less sticky surface. The edges will need the screws.

It's doesn't hold up after washing, rain or snow. Screwing it to the bumper is the only way to truly attach this thing.

I went to walmart picked up garage door weather seal for $3 and some double sided tape for $5. Made my own lip for $8 dollars and its held up great.

great video, every video seems to be getting better & better. Also, you sold me. Planning to buy one asap, hopefully I like the look on my Subaru wrx 14 hatch

They sell them at home depot and lowes in the window section. Minus the 3m tape. Check out my latest video in fact lol.

i got the super cheap ones from china on ebay and believe it or not they are holding up great! ive had them on for 2 months and even hit a few bumps and they didn't rip

Very well produced video. Take care, be safe!

can you make a video when the car is running at 65-80 mph. i want to see how it looks in that speed

Finally put on the All-fit lip on my bumper. I have a really curvy bumper so it took me a while to get it perfect. Had to do multiple V-cuts. Damn my OCD!

yeah you got sold lol. totally want to put one on my 96 probe gt. good job again!

I am considering buying one of these products for my 19 Ford Mustang

I'm gonna order the traditional kit soon so I can install it on my accord :D hope it's not that hard lol

Just installed this shit on my garage door. Now my garage door looks aerodynamic as fuck!

i will be getting this, theres only one after market bumper for my monty which i feel its too big. this will do the trick!

Thanks for this video man, i never knew these products even existed!

Bro. Awesome video. Keep up the good work. Really well made and well Informed.

Totally unrelated to the bumper . But how did you black out your chrome grill??

Great video! Only that you did not say the actual sizes. You only mentioned small med and large.

can you post a video on how to remove the all fit lip? Just in case for future reference if I ever need to take it off for some reason.

I bought the fat lip looks great on my 07 mazda6 . All fit automotive

Great video. Only that you should have shown your car with the final product for a longer time. You have a nice car. Show it!

only thing is the price difference on the all fit is a lot moe, might as well get a custom splitter and skirts for the price they are asking, anyway just wanted to say your Honda is clean asf, what kind of paint is on it?? in love with it

Nice videos!!!!!!!!can u make a video showing interior detailing!!!

i just bought one, not put it on yet. really wouldn't trust it with only the tape holding it though

is there a way to make the lip not so flared out? I don't like the pointed forward look too much. I rather have it point directly down

Cool item and video, looks more like a splitter than a lip though.

How come you took off the dip? I loved the color.

Great video now to see the cost to ship to UK

How do i remove the lip i need to adjust the corners of the bumper part and will it stick agian

Just ordered mine pretty excited

Sorry I know you probably said which you one you where going to install, but which lip did you install at the end? Small, mid or big?

i have already 2 bumper on my c63 now im getting that its perfect

Does the all fit lip kit only come in black? Or can we paint over it?? To be custom to the car..?

Do any of these lips go straight out instead of going down...

Is 1.5 inch width what you used?

you think it will fit my '93 toyota Celica? Ive been looking for a easy way and cheap way to give it a lowered look.

where do you but this stuff at I want to put it on my honda accord is .

If you have a car with a bumper that has some underneath damage, should you sand it a bit first before installing this?

would you know how it holds up in the winter?

Hey I am trying to buy this lip for my Honda accord and installing is simple it seems, but can you do a video on how to remove this lip once its been installed on a car? I would really like to see it. I will sub and will be waiting for video thanks bro!!!

ok so which do i go with? not so cheap n quality ofcourse...

What's the weight difference? How much heavier is the All-Fit when compared to the EZ's?

What's traditional? 1.5inches?

Hey man is your ezlip still holding up? I ordered one but before it comes the only worry I have is that it will go flying off once i get to speeds of 120-140mph if you can update on it after all these years would greatly appreciate it

great vid, very helpful

what better to buy 8ft or 9ft

so my car (03 dc5) already has a lip on it a jdm type r lip .. so what if i put lip on my lip!??? that be lipgangsta lol never heard of these before. gonna check it out.

How long of a peice for you front bumper

why people give thumbs down?

is it durable on all 4 season... by the way am in NY ....so alot of snow here .....

Hey man, what's the angle like on standard all-fit compared to the mid-fit? i'm not sure which will look better on my ride ('09 eclipse) and from what i've seen in some pictures, the mid-fit is more vertical as opposed to sticking out flatter. I'm trying for a more angled look... Thanks for any input, and i dig your videos!

bro where did u purchase ur front grill..

to do a whole car how many feet do i need

What are those 2 red circles behind the grille?

Question, removing how difficult is and will it leave a lot of adhesive underneath and how hard is it to remove that.

Rice level: Xtreme (adds 100 hp)

You convinced me in buying this tonight which size did you put on?

Where do i order the all fit lip!?

how much are these?

I lost all my decals and want to rep my lip any ideas on where i could get some new ones??

So EZ Lip is made of rubber and ALL Fit is made of plastic?

My cars bumper has a plastic bumper guard valance on it, do you think the all fit lip kit will stay on?

Does it come in white?

Did you mispronounce decals??

EZ lip works fine as long as you take the time to install it and add some heat to the adhesive.

can u put them to the side?

@milanmastracci Does this hold well against a dipped car?

Hi just wanna ask wich one is better or look more aggressive for my civic 15 ,traditional or mid size? Thanks :)

Hey man are you gonna tune your car or do anymore mods to it? I got the 2014 accord sport. Trying to see what else I want to do to it. Looking forward to your reply

When installing the lip, do you need to jack up your car? Or can you install the lip while your car is flat on the ground. Thanks!

I need assistance. took me forever to get a new bumper (fender bender day before kit came in). I just tried to get my AF Midlip on. Looks pretty good but trying toline it up and being stiff I see its off baddly looking back. The 3M tape is bonded as well. How did you get all these lips on and off for your demostrations? Thinking about cutting the tape off then cleaning the bumper and using the screws to bond it.

Do you think you can put it on a stock spoiler for an extended look? I have a '14 Si

is this strong enough to go tru our Canadien winterrs ???

This video is sponsored by allfitauto nonetheless gj on production value of the video keep it up.

Did you cut small triangles on the lip for the corners of the bumpers again?

hey broo I have a G35 coupe with GTR Bumper , do you think is going to look good with the lip

what are those red things on your radiator?

He uses the 1.5in tape right?

which lip is attached on your accord?

to lower, did you use coilovers or springs

thanks i found it

Is 9ft enough for front and back?

This is probably a dumb question..but what's the point of installing a lip? I'm thinking of doing this..but first I want to know what it's for lol

Thx you pro

What's the price for the all fit lip? That's the regular size?

Jeez...you repeated yourself far too many times. This video could have been 3 minutes long with editing plus I was expecting some curb rash comparison results instead of hand tearing that could truly tell me which one would be best suited for protecting the bumper and still look decent after a beating. This was more of an ad than an evaluation.

SOo whats the idea of this ? ?

What your is your Honda Accord

how do these hold up to the bumper in winter driving with snow?

where can i buy this at

Undisclosed sponsorship much?

Do you think this would look good on my stock gti

i put one on my astra vxr and it pulled the bumper out of shape

all fit is $200 + shipping and the EZ is $35 + shipping... for $200 you can buy a fiber glass lip that looks good

>low enough

Do these hold up at 100mph?