@mattjans 6 ай бұрын
Very helpful! Thanks!
@carlfritz9496 4 ай бұрын
Very useful! Good job explaining.
@NJNick325 5 ай бұрын
Does the 2025R have the same 2 driveline zerks? Was watching another video of a JD Tech working on a 2025 and he stated the driveline only had one zerk in the rear.
@kylebaker4526 5 ай бұрын
Do you have any recommendations on how to grease the 54D/60D mower decks for these 1 series tractors? For example how much grease do you pump in the spindle, what kind of grease, etc. There aren’t really any clear videos on how to do this.
@JerseyTom 3 ай бұрын
you fill the spindles with grease until it starts coming out the bottom. you need to remove the blades and the sheet metal guards to be able to see when they are full. easiest with the deck on the loader.
@elained9591 11 сағат бұрын
I believe the manual says every 10 hours. I use a long lock n lube because I have the drive over without the long one, I had to take the ramp off. I just give it 2-5 squirts. You can feel the back pressure when you pump it in
Papé Machinery Agriculture & Turf
Рет қаралды 3,1 М.
Tractor Time with Tim
Рет қаралды 191 М.
Western Equipment
Рет қаралды 82 М.
Good Works Tractors
Рет қаралды 1,4 МЛН
Tractor Time with Tim
Рет қаралды 140 М.
Tractor Time with Tim
Рет қаралды 69 М.