All Metal Model Engine vs 50,000 rpm

All Metal Model Engine vs 50,000 rpm - Will it survive?

Рет қаралды 2,794,124

4 жыл бұрын

🎓eBay Secrets (11 step Blueprint) - kevtalbot.clickfunnels.com/sq...
💡Check out my Business Channel: / @kevtalbot5356
🎥My LIVE Stream Channel - / @kevintalbotrc
🧡My instagram / talbotkev
💙My Facebook page / kevintalbotvideos
🚗Kev's RC Basher School - kevin-talbot.teachable.com/p/...
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Although a lot of my videos are RC Car videos you will also see other stuff like business, Amazon FBA, eBay, Monster truck, Cars, insurance and many other topics.
#Kevintalbot #rccars #rc

Пікірлер: 965

@victorkrivor2174 4 жыл бұрын

you should have used engine oil and just put it everywhere

@fcoargueta5h 4 жыл бұрын

I was thinking the same thing

@psalm17gamesandfriends14 4 жыл бұрын

SLIIPEERRYY

@psalm17gamesandfriends14 4 жыл бұрын

how about the wires?

@cameroneshleman4833 4 жыл бұрын

@@psalm17gamesandfriends14 ?

@ThatBlueHoe 4 жыл бұрын

True bro

@bigccoltonme 4 жыл бұрын

Imagine how well it would have ran if you actually had oil and seals like a real engine.

@bigccoltonme 4 жыл бұрын

Probably apply dry graphite if you ever try this again.

@taylorredmond643 4 жыл бұрын

You’re an idiot it’s not actually “running” whatsoever

@fabianvaldez6101 4 жыл бұрын

Taylor Redmond lol it’s not running but there’s still moving parts, oil would’ve definitely helped it

@mr.bigballsmaniv9553 4 жыл бұрын

Taylor Redmond it still has a lot of friction bc of the moving parts, so the oil would've heloed a lot

@loadedgunsbehindsmilingfaces 4 жыл бұрын

Still probably horrible. I think even Formula engines and performance motorcycle engines don’t go beyond 20k rpm because of things like centrifugal force and valve float

@aydanangus 4 жыл бұрын

Submerge the next one in oil. And set up a small pump to oil the valves.

@jordans6146 4 жыл бұрын

I agree get some proper lubrication going

@diegoandalexcockatiel7540 4 жыл бұрын

@Adolf Hitler WTF MAN GO TO HELL I THOUGHT YOU DIED

@diegoandalexcockatiel7540 4 жыл бұрын

@Adolf Hitler (j.k.)

@diegoandalexcockatiel7540 4 жыл бұрын

@Adolf Hitler plz don't take it seriously

@diegoandalexcockatiel7540 4 жыл бұрын

@Adolf Hitler ok

@pan4909 4 жыл бұрын

2:06 dude really laughed like Elmer Fudd

@kylelepine8320 4 жыл бұрын

LMAOOO

@jessixox 4 жыл бұрын

Shhhhhhh were destroying engines

@adamackels73 4 жыл бұрын

Imagine if it had a pressurized oil system, a balanced rotating assembly, and was designed for 50k rpm.. Let's go to your real cars, and try to achieve 50k rpm.

@merciragasolina1800 4 жыл бұрын

Not even supersportbikes can achieve amything close to 30k, how should you get to 50k? Mechanical stress is very high.

4 жыл бұрын

It's not experiencing the same stresses as a real engine, so it will never act like a real engine. It's being driven, it's not worrying about valve float, ring seal, ignition, etc. If you put a supplemental oil system on an actual I/C engine and drove it with an electric motor it most certainly could withstand a ton more than if it was actually firing.

@MertNisa3168 4 жыл бұрын

When the engine rips then glue it back like stemp😂😂 Pat:stemp do you have any experience with engines? Stemp:i glued a nitro engine in the past😂😂

@5bananas1 4 жыл бұрын

maybe jb weld it

@kidsythe 4 жыл бұрын

KZfaq putting this video in my recommended saved my life.

@KevinTalbotTV 4 жыл бұрын

haha I hope it entertained you :)

@Scre1mingcat 4 жыл бұрын

Don’t Kermit death lol why am I saying this

@johno9507 4 жыл бұрын

There is absolutely no relationship between the way words are spelled and the way you pronounce them. 😀

@CardboardSliver 4 жыл бұрын

That's pretty much how we Brits sound lol

@ashleycarter9668 4 жыл бұрын

That's like 99% of British accents... Ever heard Welsh accents?

@Holtynfuntime 4 жыл бұрын

Expect brits kinda invented English

@BICIeCOMPUTERconGabriele 3 жыл бұрын

They are British, they invented the English language. Their accent is quite normal...

@ahmennation3760 4 жыл бұрын

*how my fiesta sounds like when I start it up* 3:48

@mr_sowong9464 4 жыл бұрын

Your fiesta run on wankels??

@adogusnysaputro4903 4 жыл бұрын

@@mr_sowong9464 hahahahaha

@ahmennation3760 4 жыл бұрын

mr_sowong nah it runs on broken pieces of engine

@shanebanich1498 4 жыл бұрын

@@mr_sowong9464😆 what in the hell is a wankle?!?!?!

@mr_sowong9464 4 жыл бұрын

@@shanebanich1498 rotary engine

@calebcjg3536 4 жыл бұрын

8:09 I love how he has a helmet in but is hiding in the closet 😂😂👍

@anthonycoronadounsubscribe565 3 жыл бұрын

You just sed the end of the video

@sixty-nine8358 3 жыл бұрын

but this comment is 1 year old

@anthonycoronadounsubscribe565 3 жыл бұрын

OJ ok

@jeffdeale1353 4 жыл бұрын

Bunch of middle age men acting like me when I was 11😂😂

@ramzan.k9266 4 жыл бұрын

SHORT ASIAN It’s called the Mid Life Crisis😂😂😂😂😂

@turtleguy123r3 4 жыл бұрын

Why the fuck did you have a 50k rpm motor?

@zacariasblanco9738 4 жыл бұрын

Beign an adult is boring unless you like paying bills do the same thing at work day in day out talk to idiots you dont like but you have to like your in-laws you know the fun stuff...

@kts8806 4 жыл бұрын

You should build a transmission and make an huge RC car!!

@Moonsauc3 4 жыл бұрын

Kev, you crack me up. Your gunna have a hard time explaining to the landlord why vasaline lotion coconut and olive oil is splattered through out the place lmao

@elytolson983 4 жыл бұрын

I can tell it’s gonna be epic and I haven’t even seen the whole video yet

@KevinTalbotTV 4 жыл бұрын

mmm, could have been better!

@Raldoux 4 жыл бұрын

@@KevinTalbotTV yes

@justinflanigan4263 3 жыл бұрын

@@KevinTalbotTV ya

@AW-Luke 4 жыл бұрын

Ohh YES I was wondering when this was going to happen

@waistedsausage1071 3 жыл бұрын

I'd love to work late at night on rc cars with these guys, specially with the bigger guy and Kevin!

@pedrowoolson4273 4 жыл бұрын

Metal motor won that one, lads! Pretty sweet kit, although I must say that I prefer actual usable engines, even as an old man. Building it would be fun, but somebody else can have it on their shelf... I remember tearing down $50 VW motors to learn the ropes and having a blast with actual cars for about the same money as that kit. Ah, the good old days

@davidboyd4026 4 жыл бұрын

My favorite KZfaq videos. I don’t know how you get any negatives... myself on the other hand 😧😁😁😁👍

@williamquick6153 4 жыл бұрын

I can't even begin to tell you how much I enjoy these type of videos from you guys. That is a really cool model. Glad you got some failure out of it but also able to keep it for the shelf. 👍

@Basherqueen 4 жыл бұрын

Wow, a very realistic fail of the engine. You guys have always fun testing the limits of stuff lol

@lacos1795 4 жыл бұрын

Cool little engine! Amazed at how much abuse it took, definitely a cool shop piece🤙

@Termi-Motovlogs 4 жыл бұрын

Quote of the year. "HAHAHAHA Nobber!" Kevin Talbot 2019 Made my night that did.

@Skogsvasen 4 жыл бұрын

Another great fun vid, thanks! Always lovely to watch you three go nuts on stuff 😆 I really appriciate thease vids! But I belive the build won this one, it took the abuse quite good.

@eddielane9569 4 жыл бұрын

Thanks for showing that motor. I may get one. Cote the parts in Moly Lube which is a new engine parts lubricant that you put on motor parts as you're installing them. That will give them better lubrication than what you had put on them.

@owenevers389 4 жыл бұрын

The banggood special!! Haha!

@frontleverguy2216 4 жыл бұрын

Kevin you need to find something that can survive “THE RIPPER”

@rcwreck-creation 4 жыл бұрын

Can’t win em all Kev! Still tons of fun to watch dude! Good to see the three of ya in the shop. Cheers 🇬🇧🍻🇨🇦

@MrBeastbike 4 жыл бұрын

Kev, I reckon put the ripper up against a .21 engine for a laugh. Calculate the gear ratio of nitro spur and pinion so they have a fair chance against each other, I am guessing maybe 2:1 ish? Easy project and lots of fun. Give the nitro motor a fair chance with a desk fan and see what blows first. I reckon a few dead clutch shoes before 1 lets go

@ISTHATWILL 4 жыл бұрын

Did any engine heads in here felt weird seeing them use hair product for lubing😅🤔 or is it just me

@thethunderbirddirtcar_5718 4 жыл бұрын

Never heard of an engine head bubs. It's gear heads

@fateconfaym6501 4 жыл бұрын

7:31 sounds like a Rotary

@wileecohagen 4 жыл бұрын

As far as lubrication goes, choose one with the highest heat capability or flashpoint. So, Vaseline being a petroleum distillate will probably be the best choice.

@MrPlasticdinosaur484 4 жыл бұрын

The alternator shaft looks like it's seen better days mates

@calebmenkerbob6462 4 жыл бұрын

Hook it up to a nitro engine and let it rip 😁

@user-uz2xs5ng3c 4 жыл бұрын

Great video get :) saw this on pats Instagram was wondering when it was coming

@rcworxshop 4 жыл бұрын

🤣🤣 that sad music when it went 👍🏻👍🏻

@loquitos1972 4 жыл бұрын

What a shame of such a nice model. You're all totally bonkers and I love it! Love your vids Kevin! Thumbs up!

@nathanz602 4 жыл бұрын

7:28 Sounds like a rev limiter...

@aydanangus 4 жыл бұрын

Launch control/anti-lag

@anthonycoronadounsubscribe565 3 жыл бұрын

It's just a end of the video

@Anonymous_Music 4 жыл бұрын

I've been wanting that very specific engine model for a long time, but I cant afford it.

@Anonymous_Music 4 жыл бұрын

Literally that exact one.

@stanis4554 3 жыл бұрын

What a reliable engine, from a F1 team we need to contract that engines brand 😃 nothing can destroy it 😆😅

@10thScaleGarage 4 жыл бұрын

There were no losers. This video is just win.

@jcrc9051 4 жыл бұрын

Love it! Subbed!

@rcguy7414 4 жыл бұрын

You are good at this stuff can you plz give me tips in one of my Channels in the comments plz I love you channels

@blaccteezy 4 жыл бұрын

I keep waiting to hear “Holdor! Holdor! Holdor!” Lol

@alcarriere1630 4 жыл бұрын

That was unexpectedly Kool-Aid, man

@TRX450RVlogger 4 жыл бұрын

7:47 almost sounds like a little rev limiter haha

@Shamrockjason 4 жыл бұрын

These guys sounds like they have marbles in their mouth as they speak.. should have used some loctite on all those screws

@edgardowong5935 4 жыл бұрын

You snapped the crank! Sick man I love it!

@Alexmckinney1025 4 жыл бұрын

Kev says he has no patience but he has like 75 rc cars lol🤣

@thatjokerperson7062 4 жыл бұрын

I cant see any car people buying this as they call it a v4 *VISIBLE CRINGE*

@googleuser4102 4 жыл бұрын

INLINE 4, SR20DETT GANG

@RatchetRalphOfficial 4 жыл бұрын

How about you get one of these engines add a fuel system and try to make it actually work!

@juippi420 4 жыл бұрын

more! MORE! Theese videos are so fun theese rpm tests.

@gingegaming7755 4 жыл бұрын

You got me in to rc cars bro

@bennyggirvan1848 4 жыл бұрын

Still stronger than a 1.0 eco boost ford engine 😂

@logansaunders0321 4 жыл бұрын

Second viewer and first comment woohoo 🥳

@nerk234 4 жыл бұрын

From Italy,the thing you do with you're fingers,here,Is a gesture that use in military world,rappresent the higher grade respect a noob!!!

@duck9191 4 жыл бұрын

50k rpm is the no load speed, or kv×voltage. Loaded it's probably no where near that, would be interesting to see what kind of rpm it gets turning the model engine. Cheap optical tachometer from hobby king and a piece of tape would get that info.

@mitchellbliss3828 4 жыл бұрын

U got the dopest little shop area. That's like my dream shop room / work space !!

@rollonwalker2403 4 жыл бұрын

Very cool guys, anything that can bring some good laughter is always worth it

@megurinemiku8201 4 жыл бұрын

When you keep hitting your rev limiter 😏

@bradbozarth1822 4 жыл бұрын

Damn it even has Rev limiter! Lol

@experttrolltrollingdirty2062 4 жыл бұрын

Built engines with chemical metal hahaa brilliant I love these vids

@anthonycoronadounsubscribe565 3 жыл бұрын

0:44 Kevin: uhhh it says blupu Blulululpulupuluo

@Tronix1ivan 4 жыл бұрын

Ну и найух он ушёл и ещё в маске😂👌👏👏👏

@robbrcnstuff4220 4 жыл бұрын

That's a cool engine model kit and it survived the ripper.

@AiOinc1 4 жыл бұрын

Now overrev an actual running engine like this. Get one of those little 4 stroke V4 nitro engines for model planes. Toyan makes some really good ones.

@haatch999 4 жыл бұрын

Yeah a good $2500 engine .... Lol

@rccreator7997 4 жыл бұрын

Oh yess more engine destruction

@tiagoarendse3386 4 жыл бұрын

Looks cool just got in the car from school

@ashleycarter9668 4 жыл бұрын

My 500cc atv pretty much failed exactly like this... Big end failed and the crank span around and crushed the con rod... I love seeing the destruction that happens in engines when they fail

@thomass3559 4 жыл бұрын

Im really starting to like that ripper engine for my kraton 🤣

@passinggraves 4 жыл бұрын

that piston almost went to the moon lol

@750mvagustabritten3 2 жыл бұрын

Great use of time appreciate it all Thanks

@JDNSAUDIS 4 жыл бұрын

“It’s only a model...” 🤣🤣🤣

@00godlovesus 4 жыл бұрын

Amazing that was lots of fun:)

@joshualu3073 4 жыл бұрын

YESSSSSSSSSSSS FINALLY BEEN WAITING ALL MORNIN

@EJ-74 4 жыл бұрын

Pretty damn tuff little bugga With the right amount of oil and all parts tightened up that thing would hold up great 👍✌️

@robertpaws 4 жыл бұрын

That drill in the thumbnail is the exact same drill I have...:)

@jaratt85 4 жыл бұрын

BTW there's a translator app that you can get on your phone that will use your camera and then translate (roughly) what it sees to English.. Mighty Car Mods uses it from time to time on Japanese instructions/wiring diagrams/fuse panels.

@KevinTalbotTV 4 жыл бұрын

Thanks dude

@MertNisa3168 4 жыл бұрын

V-TECH kicked innnnnnnnn😂😂😂

@burgerbirger2221 4 жыл бұрын

Looks like the old TVR workshop😁👍

@FairLoveFoxGaming 4 жыл бұрын

I don't see how you can sleep at night...I wouldn't be able to sleep because I would be so excited to see the next day...

@ethanpierce4536 4 жыл бұрын

Love all your vids Kev! Hello from Birmingham, Alabama

@Toilet_Pig 4 жыл бұрын

Love the videos , carry on the good work

@blueterror2276 4 жыл бұрын

The legendary Ripper finally met it's match (time to get a bigger motor to handle metal)

@brianargo9306 4 жыл бұрын

Good job guys! Ur patients are like mine. None at all!! Lol

@mailmanx69 2 жыл бұрын

0:45 - That's some damn good Chinese speaking! I can't even do that well and I actually been to China Town in San Francisco, Californica, USA.

@joshsrcs 4 жыл бұрын

Kev you sure do have lots of LUBES

@anthonypicklesimer1030 4 жыл бұрын

I love how it makes the motor look like a starter

@ronniewilliz153 4 жыл бұрын

I was watching grind hards new senderella suslension upgraded but then this showed up so i had to click

@leonthomas9372 4 жыл бұрын

8:00 The flywheel is having a spasm

@graysonparks9703 4 жыл бұрын

I feel like this would be cool if someone took this engine and made it real like closed up all the holes in the sides and what not and make it run cool little engine to put in a request car