All new BT100 V2!! and this thing has a secret on the inside

All new BT100 V2!! and this thing has a secret on the inside - BBR 80/100cc 2 stroke tear down

Рет қаралды 66,104

Күн бұрын

4 years in the making and the wait was well worth it! We see all of the ins and outs that make up this new beefcake of an engine. Unboxing and full engine tear down!
Get yours today! Use code MOTOREDLIFE www.bikeberry.com/products/bb...
Check out the V1 first version here • This BT100 is crazy!! ...
0:00 Intro
0:56 Unboxing
4:36 We meet the BT100 V2
7:06 Engine Teardown
9:15 Built-in reed valve
11:16 Iron sleeve?
15:10 Final Thoughts

Пікірлер: 90

@ricklorraine 5 ай бұрын

Alex, thanks for calling me back was surprising to hear from you. Watch you all the time Thanks for all your advice and getting back to me fast

@synthiccl Жыл бұрын

very interesting seeing all these motorized bike motors evolve

@keeganhache6667 Жыл бұрын

Good to see another video my man!

@wesleychin2280 Жыл бұрын

Can't wait to see how it runs right out the box and after the break in period

@jerryb1234 4 ай бұрын

Good-luck with that,🙄, Alex only makes video's when someone sends him something for free,🤑, these companies sending him stuff should demand more than just one video from him.😋👍

@Beyond_Slots Жыл бұрын

Great Video, Lots of information. Yea They did it Right, I AGREE on thee THUMBS UP, definitely going to be a HOT Little RACE!

@z28kid71 Жыл бұрын

I think this is what we have been wanting from a 100 they already had great power but they always got to hot and melted the exhaust side of the cylinder walls and piston this iron sleave and more surface area of fins and the humongous head this should last at 3/4 / wide open for as long as you want and be able to do the long distance drives a modified 80 can do like 200 300 kilometers round trip

@dustinh4175 9 ай бұрын

I actually like the 2 bolt chain tensioner because of the straight vertical adjusting slot. I just drill out 4 corner holes and make it a 6 bolt. I wrap skateboard grip tape on the frame chain stay where I clamp the tensioner and it dosen't move at all.

@jozefsk7456 8 ай бұрын

laws in my country are changing, I might be able to legally ride with this engine on my bike, cant wait

@Matthew-wj8cm Жыл бұрын

Please do the 300 mile update Full Send Video. Love the vids Alex. Overpriced engine. Rather get a Phantom but still nice

@BuildBreakFix 11 ай бұрын

Lol 50mile 😂 video 300 is only is Jesus personally drove it😅

@bielatorta55 6 ай бұрын

Já estou ansioso pra ver ele no Dinamômetro!

@JamesPiccone Жыл бұрын

$350+, 6mm mounting instead of 8mm, Only one proprietary exhaust option & finally no piston port variant. Very hard to make that purchase when you can pay $80 for a 49mm iron bore.🤔 Did you pay for it or did the bike berry dude hook you up?

@mflbikes1870 Жыл бұрын

Agreed, overpriced junk

@jmrides777 Жыл бұрын

😂 I think the BikeBerry guy set him up. Ouch.....I have a 47mm china Doll that could take this motor on😎 kzfaq.info/get/bejne/Zriqe5SWqaeanHk.html

@ccboss490 Жыл бұрын

Agree.

@custombikedesigns343 11 ай бұрын

Anyone else notice the 3 huge cracks in top end 2 in head? It's so huge cause so poorly made only way it doesn't overheat lol

@BuildBreakFix 11 ай бұрын

Bt100 has lots zink in casting materials made in chin lousie indina foundries. Lots zink cadmium makes it crack easy. All the metal is pot metal in bt engines. Same factories that make hone drpo (amazon brand) weedeater things blow up after 7 uses worse then China made castings lolz steel probably flung cast steel then bored out with razorblade 😂 you know for sure this was a freebie arsh kiss video😅 so huge cause all zink retains heat Lack of sleeve index point is dead give away spun casted steel sleeve. Zink makes it nice dull shinny white color though😂 oil resistant easy to clean😮 best thing this whole damn engine is fact it has 14mm pistion wrist pin lol

@gregoryvangaya8971 10 ай бұрын

looks pretty quality

@metal-lm6ue 5 ай бұрын

My bt100 has 3 piston rings the bt100.2 on the video only has two will this change the compression? Also those reed valves look amazing, engine size might be a little too hunky for a pleasant ride and a two piece jug might have compression loss if gaskets are not seated properly. All in all looks amazing hope it performs wonderfully yet I do have some concerning questions especially heat transfer to carburetor and piston performance with one less piston ring

@willardbuchanan9122 7 ай бұрын

Happy thanksgiving alex❤

@TheSrduglass Жыл бұрын

I can forcast fuel boiling issues with that carburator so closed to the power plant

@user-dj5rb1jr4u 11 ай бұрын

I would like to see the bore and stroke checked to make sure the stroke is 40 mm not 37 mm also would like to see how they stuffed the case. And also would like to see what the transfer ports look like with the person at the bottom center to the transfer ports clear of the piston are does the piston block part of the port which would restrict flow into the cylinder?

@johnreyleosala2935 6 ай бұрын

I have a question, i have a bt100 v1 and as far as i know, the only mods/upgrade i can do to my engine is to change the block/cylinder head to make it v2. I didn't see any video on YT modifying this engine or even any of the shelf parts that's plug and play... So theres the question, what other mods can i do to the engine? Thanks...

@MrOukisee Жыл бұрын

That's a lot of "nice and clean" for a brand new engine lol

@narutofanz4 Жыл бұрын

Bro what happened to Zeda motorsports??? Was it a scam after all??

@MrThatnativeguy Жыл бұрын

Lol Zeda is so 2019

@darrenosborne3657 3 ай бұрын

I'm going to buy the phantom 85. I got some questions on what would be the best kit to get I'm looking for 45 to 50 mph and Reliability.

@gavmansworkshop5624 Жыл бұрын

Yea I want one.

@neonone9164 10 ай бұрын

I thought u had to have a windowed piston with a reed valve? Piston not windowed so has does that work?

@corneliussianturi476 11 ай бұрын

btw why they don't wan't make the magneto little bit bigger and heavy and aslofo flywheel wheight get heavy to, cause they importarn for get inertia movement from that magnetto to help crankshaft rotate easily???

@douglaswilson7842 4 ай бұрын

Can I get a good Recommendation on 2 cycle oil I'm buying a bike in the next couple of weeks and I'm trying to find the best oil to use for it. Thank you

@MotoredLife 4 ай бұрын

Opti2

@Bobs-yer-uncle Жыл бұрын

So is that iron sleeve replaceable?

@gregoryvangaya8971 10 ай бұрын

Does the head fin top fit on the Pantom 85?

@user-eh4kv6vl8n Ай бұрын

The only thing that sucked right off the bat was there's no 12 mm piston pin clip

@dr.weaver6011 Жыл бұрын

Those transfer ports look like they’re barely angled. Almost like the BT 80 electric start motors and the 110cc motors.

@larryshaver3568 8 ай бұрын

True the iron sleeve will last MUCH longer than an aluminum one

@fletcherjacobs3688 6 ай бұрын

It’s so fn thick. Bored out wouldn’t be something I’m opposed to seeing

@qeroanvurgesa796 11 ай бұрын

Is it better than the LD100?

@blakesmith9549 5 ай бұрын

What is the white wire for

@johng2779 4 ай бұрын

How do you know it wasnst locktited and torqued down

@ellgwapo.1754 6 ай бұрын

Thats! 100 CC Low price 🚴 engine Look's nice. If have know how , parts everything nice meby about 12- 15 HP.

@Adalbertomatos_ Жыл бұрын

The engine look nice but i dont like the reed valve side way

@dustinh4175 9 ай бұрын

You should see if that top end will fit the fisrt gen bt100

@MotoredLife 9 ай бұрын

It does!

@willardbuchanan9122 Жыл бұрын

Hey Alex😊❤

@MrNosajwhitey Жыл бұрын

hopefully they aren't to big for certain frames

@MrThatnativeguy Жыл бұрын

You’ll be damn sure it is, that looks pretty beefy

@aaronblair9583 11 ай бұрын

No window in the piston seems off

@manuelfloressr.9039 Жыл бұрын

Big fins for cooling is good but it is also bad. a big engine does NOT fit in most bicycle frames.

@kennyrogers8139 11 ай бұрын

I’m looking for a throttle for my motor bike I see that we both live in the same city

@Waxxumus 8 ай бұрын

BUT DOES IT HAVE A WINDOWED PISTON FOR THE REED VALVE YET?!

@user-nu5wf8uf4c 10 ай бұрын

New vids?have you ran it yet?

@jamesbondo13 5 ай бұрын

So what happened with thia engine?

@8t8tropah 7 ай бұрын

,,how much the price

@fullsendmarinedarwin7244 9 ай бұрын

I'm sold/

@pauls5745 Жыл бұрын

it's better than v1 but too much $$ and now fits in wayy less bikes. what's it weigh, is it a pig?

@Matthew-wj8cm 6 күн бұрын

It's a pig. Runs cool though

@user-nu5wf8uf4c 11 ай бұрын

does this cylinder fit the old bt100?

@user-un2gy7wf6o 8 ай бұрын

yeah , bike berry has a video on it

@LAreckless97 8 ай бұрын

We're is the ride video

@peterolson8350 Жыл бұрын

No squish? Way?

@michaelcatalanottohandyman Жыл бұрын

Let’s race!

@ccboss490 Жыл бұрын

I do not see any technology improvement to justify the price. It's only look better.

@z28kid71 Жыл бұрын

You my sir are blind in every way possible

@ccboss490 Жыл бұрын

@@z28kid71 5 other's so far agree with my post comments. And we are the potential buyer's.

@JamesPiccone Жыл бұрын

@@z28kid71 Just a different cylinder bro. Go ahead and buy that turd then.

@user-yd1by3vq4t 8 ай бұрын

Где купить такой мотор пору штук бы взял

@wags9777 Жыл бұрын

Gravity does not play a part on reeds when it "sideways." However gravity would play a part on the bottom reed if it was oriented up and down.

@littlefish9670 Жыл бұрын

👍💯🐟👋👋👋👋👋

@ellgwapo.1754 6 ай бұрын

Oh' i donth' wahnt have the! Big moulf bat i forget too' thold be'fore Open the original engine doo' First Name: Druck Probe. If everything Name: dicht 85- 95 % soo' No Name: dichtflächen Fehler. Jes after meby poriting.

@gregoryvangaya8971 10 ай бұрын

these drive gears should be 13 teeth not 10.

@lkkeowee Жыл бұрын

Another pos for $350. Carb and exhaust are junk. Come on stop trying trying to fool the new guy. So you can put money in your pocket!

@vk2aafhamradio Жыл бұрын

Let's play along and say this will make 5hp. That's enough to go 60km/h (37mph). Downhill 70-80km/h. If you're going that fast on bicycle tyres & brakes (even hydraulic discs) you are a hazard to yourself and others. These things look cool to kids & convicted drunk drivers but more than a few people get killed on them.

@MrThatnativeguy Жыл бұрын

@@vk2aafhamradioyou can get Michelin E bike tires rated for 90kph ,even track pedal bikes go 50kph+

@marcusprince3999 10 ай бұрын

@vk2aafhamradio Well just take the brakes off then!😂 'Most everybody's got shoes👞! 😜

@mflbikes1870 Жыл бұрын

Wow what a horrible job, v1 bt was better, this thing is overpriced junk

@JamesPiccone 11 ай бұрын

I can't believe he doesn't have one thing bad to say about.🙄😒 He's all over Tony from dingleberries nutz.

@mattparker9726 Жыл бұрын

excited? For another super cheap jank ass 2 stroke? nah, man. it's 4 strokes or nothin. I use these motorized bikes to make money. When they aren't broken on my porch. Which is 85% of the time. I'm done with 2 strokes.

@jameshatton4405 Жыл бұрын

For a newbie (myself) what engine would you recommend? Note. I'm considering for use as a paramotor? Also your recommendations on most reliable 2 stroke you have been exposed to? Expansion chambers and modifications? My thinning is that if this is your bread and butter you are going to have some experience about various different engine types and modifications? I do acknowledge your dislike for 2 strokes also, but as a paramotor application running mostly as a stationary motor most of the time? I'm considering power to weight and hope you can look past your exposure to these motors in a motorised bike application?

@vk2aafhamradio Жыл бұрын

@@jameshatton4405 bike motors have reduction gearing to drive a bicycle wheel, not a propeller. Even if you could make it work, you definitely don't want a low quality, low reliability bike motor to go flying with, at any price.

@marcusprince3999 10 ай бұрын

@@vk2aafhamradio I'm new to this, and planning to do my first motorized bicycle build soon. Is there such thing as a bicycle motor that's NOT low quality? If so, 🙏please, do tell, and point me in the right direction?