No video

Allen & Heath - Deeper Into Dante - Webinar and Exclusive Preview

  Рет қаралды 25,493

AllenandHeathUK

AllenandHeathUK

Күн бұрын

From installation to live sound, as #Dante networking becomes an ever increasingly important component in our customers’ systems and solutions, this webinar takes a look at how we are increasing our integration possibilities via Dante and expanding our ‘Everything I/O’ ecosystem.
We look at how these solutions can be used with or without an Allen & Heath mixer, and can be the perfect fit in corporate environments, houses of worship, theatres and educational facilities.
We’ll also be covering some exciting case studies where Dante was a critical component.
w/ Allen & Heath’s Nic Beretta and Audinate’s Augusto Marcondes

Пікірлер: 10
@chadolson7466
@chadolson7466 Жыл бұрын
It would be cool if there was a stage box that did both S-link and Dante
@alanrodriguez4110
@alanrodriguez4110 10 ай бұрын
Can I connect a Livemix 16 system to the Avantis ?
@vlogdosvloguers
@vlogdosvloguers 3 жыл бұрын
🍀🎶
@kcpant3943
@kcpant3943 3 жыл бұрын
Nice 👍
@guismarquesrj
@guismarquesrj 2 жыл бұрын
Hi everyone. Does anybody know if when Internal Network Bridge is ON, does it filter multicast going to the DLive's control side? We want to use only the DANTE connection to the switch and control the DLive, but in our complex system, multi-network with other things connected together in the same switch/router, it can be problematic AFAIK. Thanks in advance and greetings from Brazil!
@esmondenochofficial5262
@esmondenochofficial5262 3 жыл бұрын
Can Dente work with QU-32 ?
@AllenandHeathUK
@AllenandHeathUK 3 жыл бұрын
Hi Esmond, The Qu-32 doesn't support Dante directly, but you could use software such as Dante Via to get audio from the Qu into a Dante system. You can find information on that here: www.audinate.com/products/dante-enabled/audinate/audinate-dante-via Thanks! Alex
@MathOliveira931
@MathOliveira931 5 ай бұрын
in Dante 64x64 Avantis... Can I use a second console on the primary port and a third console on the secondary port, with all mixing channels independent?
@AllenandHeathUK
@AllenandHeathUK 5 ай бұрын
Hello Math, Oliveira931, Each console will still require a Dante Card fitted on their respective I/O port. You can then simply have all three console connected on the same Dante Network. If you need further assistance, please send a message to Support@ allen-heath.com Thank you, Rafael
A&H Sessions - Latency (SQ)
58:05
AllenandHeathUK
Рет қаралды 7 М.
Network Webinar
56:01
AllenandHeathUK
Рет қаралды 20 М.
Double Stacked Pizza @Lionfield @ChefRush
00:33
albert_cancook
Рет қаралды 125 МЛН
EVOLUTION OF ICE CREAM 😱 #shorts
00:11
Savage Vlogs
Рет қаралды 13 МЛН
Smart Sigma Kid #funny #sigma #memes
00:26
CRAZY GREAPA
Рет қаралды 11 МЛН
Can A Seed Grow In Your Nose? 🤔
00:33
Zack D. Films
Рет қаралды 30 МЛН
Maximising your Dante network with Everything I/O
45:46
AllenandHeathUK
Рет қаралды 970
Allen & Heath SQ Dante Card & DT168 Setup Tutorial
13:52
Pro Tech Marketing
Рет қаралды 69 М.
Basics of Dante Networking for Location Sound
52:31
Gotham Sound
Рет қаралды 66 М.
A&H Sessions - Custom Control - Expanding your dLive and Avantis Mixer
55:56
Unraveling Network Audio - Dante, MADI, AVB
44:52
RME USA - Synthax Distribution
Рет қаралды 12 М.
How to setup SQ5 Groups, DCA, Matrix and FX
36:06
Plugged-in AV
Рет қаралды 7 М.
Allen & Heath DLive - Virtual Soundcheck with Dante - tutorial
11:50
Double Stacked Pizza @Lionfield @ChefRush
00:33
albert_cancook
Рет қаралды 125 МЛН