Almost Fired Over a Vacuum!

Рет қаралды 450,893

4 жыл бұрын

Why I think dust extraction is important
Music is "Dialogue" by Dekobe, check it out here: soundcloud.com/dekobe/dialogu...
CarpenterOne3
KZfaq / @carpenterone3
Instagram / carpenterone3
...
I'M ON INSTAGRAM TOO
scottbrownc...
The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
My Tools
Tool belt amzn.to/3dXMZnk
Tool belt shoulder straps amzn.to/3AI0VLU
Hammer with wooden handle amzn.to/3jRhQ92
Rubber grip for hammer amzn.to/3jTM7UE
Speed Square amzn.to/3yAaE5f
Makita Circular Saw amzn.to/3qYzaKH
Track Saw amzn.to/3dV9wkF
Awesome ratchet clamp amzn.to/3dSGa6s
Impact driver (main drill) amzn.to/3xDmBat
Other drill for pilot holes amzn.to/3yAYjh4
My Table Saw amzn.to/2UzuOxp
My favourite vacuum (newer version) amzn.to/3yxss0S
Full face mask amzn.to/3hH4Cce
Ear muffs amzn.to/3yNAWBl
Green line laser level amzn.to/3yqYdJ0
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Aeropress (Coffee) amzn.to/3ijpvdQ
Donate here if you want to help the channel, thanks!
www.paypal.com/cgi-bin/webscr...
SEND STUFF TO HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer: These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this KZfaq channel and shall not have any liability in respect of any injury or damage that may result. To view full disclaimer, click here: www.scottbrowncarpentry.com/d...

Пікірлер: 545

@ScottBrownCarpentry 4 жыл бұрын

Thanks for all the questions, Questions and answers video here: kzfaq.info/get/bejne/bttkqrOT3KqsmYE.html I couldn't get to all of them, we'll do this again some time!

@woodworkerroyer8497 4 жыл бұрын

Just curious, why do you not use a bearing bit on the router? You have the guide fence, but could just use a bearing bit....

@mocopower5 3 жыл бұрын

Lol they way you milk the clock

@thomaslazarski3596 3 жыл бұрын

Was that a dingo?

@Julianme-pm7vb Жыл бұрын

What do you recommend for me? I'm a pi tor and I only use it to clean cabinets and vacuum the floor and not do so much dust. I know there are many festools extractor like yours

@johnfogarty1874 4 жыл бұрын

Was gonna sleep but some Scott Brown never hurt

@chadharris7648 3 жыл бұрын

“I don’t remember yesterday bro, so no” lol my fave. Cheers.

@glotube2 4 жыл бұрын

The festool disposable bags do have a sleeve you can use to close the bag before throwing it out. Making sure the dust does not escape. My two pence from the UK

@darengeddes972 4 жыл бұрын

Scott your videos are relaxing, I usually watch them after work,almost as relaxing as Swedwoods vids.Crack on from New Hampshire

@michaelbarnett2077 4 жыл бұрын

As a cabinet maker, after getting my Festool ct26 and making all my tools hook up to it, I will never be able to work with out it. I work beside people who don't have dust extraction and it makes you realise how good it really is having dust extraction. Also for the "throwaway" festool bags I made my own version of the lifetime bag clip from two different sizes of water pipe that slide over each other, I cut the bag open empty it and seal it up with my diy clip and I use a bag for around a year before throwing it out.

@lukenfoci 4 жыл бұрын

Well, let me tell you this, as a customer :). I had some cabinetry fitted about three years ago. I only finished painting the room, and fitters came to get my cabinetry sorted. All morning they worked without extraction vacuum. I offered them my small Karcher but they pointed out that they have extraction with them. I thought it is strange not to use extraction, especially as they were cutting Corian worktops but it is their health... However once they left I got massively upset. My freshly painted walls were all covered in the dust. And this was especially visible on my dark navy blue feature wall. It cost me 4 hours of vacuuming walls from the dust plus I gathered it is better not to breath in this shite. Extraction protects you and environment you work in. It is a good idea to use it :).

@michaelplays2449 4 жыл бұрын

Another fantastic video Scott , as always really look forward to your posts.I noticed one of the comments below mentioned doing a video on the Makita 36v track saw, im a diy guy and i bought one as i was watching one of your posts about track saws and decided to buy one.i find it to be a fantastic tool , i also bought two 5ah batteries to go with it as i felt the 3ah batteries i had which are the old type and a few years old to be a little under powered , its great to get these reviews from professional tradesmen

@oddjobkia 4 жыл бұрын

Getting that warning for not using a vacuum must have Sucked. . . . . . . . I'll let myself out

@yvindascanius6061 4 жыл бұрын

Go stand in the corner!

@pyromaniac354 4 жыл бұрын

Let yourself out of a straight jacket

@davydmir6565 4 жыл бұрын

@@pyromaniac354 DAME IT! I was going to make that joke!

@pyromaniac354 4 жыл бұрын

@@davydmir6565 you snooze you lose lol

@ItzEazayy 4 жыл бұрын

Why’s this so fucking funny 😂😂

@jerowns 4 жыл бұрын

Omg I just noticed I wasn’t subscribed to your channel. I’ve been watching you for over a year. I’m a Dutch carpenter and I’m planning to start my own YT channel soon. You’re so inspiring and informative.

@fredreid8265 4 жыл бұрын

Hi Scott i use the mini as well. One feature i like is how the bags fill up from the back first and solidly with waste too. Thanks for your great videos. Fred

@thenakinavy 4 жыл бұрын

How is Paerau's shed coming along? I think we only saw the floor go in....

@taunokekkonen5733 4 жыл бұрын

Oh that's what he was building? Was wondering why are they working on shits and dicks all the time.

@dominioncrowntv5197 4 жыл бұрын

@scottbrowncarpentry Love how you start each video with your patented, "Scott Brown here" 😁 I've failed miserably trying to imitate it with my American accent. Good stuff though man, huge fan from North Carolina 👊

@kenmaira 4 жыл бұрын

"Having it is better than not having it" - inspirational, love it. (Forreal though, we just got the ct36 AC to use with the planex drywall sander, absolutely invaluable)

@Roadsaftyslowdown 3 жыл бұрын

Hey Scott, excellent vids, carpenters have by far the most credibility over any other trade. Keep up the great work. CCA has 0.001 parts per million arsenic Rice 0.40 ppm • Potatoes 0.63 ppm • Mushrooms 0.66 ppm • Tomatoes 1.49 ppm • Shrimps 19.90 ppm Source: Contact - the TPAA Newsletter, 2nd August Issue 2003

@Hedriks 3 жыл бұрын

I really like that negative-detail wall you made there and the featured one in the bedroom. It's just makes a wall look so much better than just a painted wall.

@johnwalsh9210 4 жыл бұрын

Last couple of years i worked in a factory making stairs even with powerful extraction on the CNCs you could still see dust in the air, mdf was the worst It started to effect my health so i took redundancy and now have set up a workshop in my garage at home.

@xCoolBreezex 4 жыл бұрын

Scott Brown! Liking the videos man Tunes are on point

@oscarthefuzz 3 жыл бұрын

Great work as always but I would have to say the faster way of making these rebates is just to get the right router bit. You can get 25mm bit with a 12mm bearing on it so that when you run it along an edge it will overcut by 13mm instead of doing a flush cut. Very convenient way of doing this. I use one for doing rebates from time to time.

@timothyfay602 4 жыл бұрын

I like the longer format. I know it is more work but we all love it.

@scotttaylor4663 4 жыл бұрын

I'm diggn' that fabricating table you made.....

@m3chanist 3 жыл бұрын

Look up polk workbench

@golfknut777 3 жыл бұрын

@@m3chanist I think it’s spelled paulk

@ejicon3099 13 күн бұрын

Title should be: Almost Fired Over NOT using a Vacuum. Great little video here. Thank for sharing your experience.

@abdouldmml 4 жыл бұрын

What's your thoughts on the dewalt cordless extractor? When is kameron starting a youtube channel?

@markrhodes9632 4 жыл бұрын

A hell of a lot of builders wouldn't be competent, careful or care about their workmanship enough to be able to do this job. You fellas are killing it!

@ScottBrownCarpentry 4 жыл бұрын

Cheers Mark!

@Interior_Works 4 жыл бұрын

I use the disposable bags for my Festool CT36, but I don't throw them out, I just shake the dust out of the hole. The bags are about $100 Canadian for a 5 pack, so I save several hundred a year.

@jelletjepkema1779 4 жыл бұрын

Scott can you ask makita if you can use sometime later the 36v makita tracksaw ?? Greatings from Holland

@ScottBrownCarpentry 4 жыл бұрын

That would be cool, I'll ask

@sheepd0g07 4 жыл бұрын

I've noticed you tend to have a DeWalt advertisement before a Makita review episode. Well you had a ridged cordless vacuum advertisement before this one. I think someone is paying attention to your channel lol

@jackmartin9008 3 жыл бұрын

how does 'scott brown here' manage to make calibrating a drone funny... i swear the intros are better than some one else entire videos.

@BDJappe 4 жыл бұрын

I got the Festool cyclone trap / pre-filter. (Should work on your model, also on Makita’s vacuum systems with the systainer clamps on top) It’s Festool so it’s arguably overpriced for what it is, but at the same time it saves me money on bags. Especially if you have a lot of router work. You still need to replace the bags once in a while. Not because they are full but because the ultra-fine dust leaves a coating on the inside, clogging up the airflow.

@Boz1211111 3 жыл бұрын

I also use small cyclone whenever i can, no matter how big the vacuum you get so much more out of your bags. Thing is mine cyclone is small so i need to empty it all the time, so im looking to buy something. Main issue is i dont know how to connect it and not use too much hoses

@Sam.147 4 жыл бұрын

Hi Scott, what is the model number of the Festool Vacuum. How does the DeWalt flexvolt vacuum compare? Thanks 👍

@readysetsleep 4 жыл бұрын

7:21 Are those Bessy Rapid action clamps? The old bloke I work with, loves his old Bessy F Clamp. I'm curious if you have a video up on the right clamp to use for certain wood jobs.

@tool717 4 жыл бұрын

Scott great video I'm in Canada and as far as I know we don't have the dust extractor law but I will ask some of my contractor friends .. Keep up the great work .. I have the corded compact router by Makita and I love it ..

@wkornfeld 4 жыл бұрын

I added the CT-VA to my Midi and it's fantastic (yes it fits just fine despite their website showing otherwise). I highly recommend it for you guys. It captures like 90% of gypsum, sawdust, you name it, before it hits the bag prolonging your bags significantly.

@kobecaiafa6335 4 жыл бұрын

Congrats on 61k Scott!

@tylernol8890 4 жыл бұрын

Job well done Scott !!

@michaelburton9638 4 жыл бұрын

love the drone shots of Auckland

@michaelgurhy2941 4 жыл бұрын

Hi Scott huge fan been watching for ages I have one year left in school and am considering carpentry to do after would you recommend

@300leothelion 4 жыл бұрын

I’ve got the same festool vac. My chest feels a lot better and lot less cleaning up. I took the small hoover attachment and glued it to the sawdust exhaust port of my hitachi mitre chop saw. Now I’m using the vac on a daily basis. It’s the way forward buddy. Love from wales 🏴󠁧󠁢󠁷󠁬󠁳󠁿

@shreddakj 3 жыл бұрын

I don't think I've ever seen dust extraction on a drop saw on a job site, ever. only ever in people's workshops.

@Burritosarebetterthantacos 3 жыл бұрын

Finally broke down and ordered one. I cant use this shop vac a second longer. Cheers man!

@MichaelSmith-fo1kj 4 жыл бұрын

The plywood walls look great, did you guys cover the exposed edges with any banding or tape?

@troyclayton 4 жыл бұрын

Dust extractors are where it's at. I even have a shroud that lets me hand sand with collection. Festool plastic is too delicate for tools of that price, in my opinion. It's my only complaint about the brand, and it's kept me from buying anything of theirs- as great as they work. edit: Not to mention the time my boss told me to just put a bag on the sander, while I was setting up the extractor. It set the fire alarm off, which was tied into their home security system. Good times. Always extract. We don't use any treated timbers in interior construction here in the US (at least in New England). I'm not sure it's a good idea.

@rgbking488 3 жыл бұрын

What do you use instead of Festool? Suuuuuper expensive, it seems. Just curious as I'm starting to look into this sort of thing

@troyclayton 3 жыл бұрын

@@rgbking488 I've been using a Fein Turbo 1 for over 3 years. It's not the best, but it's really good and it's the most affordable of the good dust extractors. I'd buy it again if mine died tomorrow, but there is no indication of that. It's often run for hours at a time.

@rgbking488 3 жыл бұрын

@@troyclayton Incredible, thank you very much!!

@rgbking488 2 жыл бұрын

@@troyclayton Killer info, thank you for the insights. Yeah, it's interesting...people are always talking Festool I see, but none really push or talk about the other products. I dig it and would get it (because everyone is pretty much selling it)...but I haven't yet and will probably go with something more affordable to start. I don't know that I need a Ferrari of mobile vacuums to start...but if I was to get some larger, more permanent setup for a garage/shop, then I could see something more "Ferrari" like - cheers

@Fictitious_Character 2 жыл бұрын

@@rgbking488 another option could be the scaled down Festool CT 15. Essentially a midi scaled down in features and minus the Bluetooth option. Only thing with the 15 is that it doesn't come with an antistatic hose and so I'd source one even going with something like a Cen-tec antistatic hose to avoid the 130 USD price tag for a hose.

@richardmckrell4899 3 жыл бұрын

Time for another $5,000 Festool vacuum.

@mbainrot 3 жыл бұрын

thank you for the scoring tip, been going nuts about why my circ saw kept tearing up the ply

@rgbking488 3 жыл бұрын

What do you call the scoring tool? Been looking for that

@MrCKCHam 4 жыл бұрын

Hey Scott, love your videos bud. What kind of camera do you use? Greetings from Georgia, USA!

@am11744 4 жыл бұрын

I bought the festool cyclone about a year ago and its like a turbo booster and you do not loose any suction. The clear container is a real eye opener as to how much dust is coming out the machines.

@clearcut6818 2 жыл бұрын

The festool cyclone separator decreases suction by 15-50%

@1DaleMorris 4 жыл бұрын

Can you do something about the pros and cons of outdoor work (decks, retaining walls, etc) versus interior work (cabinetry, bookshelves, furniture etc). Ta ever so.

@TheUnleashed123 4 жыл бұрын

Ya outdoor sucks more in the winter and is more enjoyable if you enjoy working outdoors in summer

@ausfrog381 4 жыл бұрын

Awesome work

@bradwright1978 4 жыл бұрын

Hey @Scott - do you find L Class dust extraction on your Midi is good enough for the work you do in New Zealand? Thanks!

@Mranferneehardaway 4 жыл бұрын

loving this channel more and more, was wondering what is the tool you are using for scorching

@aerobill8554 4 жыл бұрын

66.6k subs... just saying ... Subscribed just to keep you out of purgatory. And for the great content. Really enjoy the tips. Very inspirational. Greetings from the Netherlands.

@jasper8092 3 жыл бұрын

"It basically has arsenic in it... pretty much"

@stan.rarick8556 4 жыл бұрын

The camera sliding down was funny. 3 thumbs up!

@QALibrary 4 жыл бұрын

I remember working on building sites in the mid/late 1980s in the UK and back then H&S was just started to be taken seriously due to the 1,000s of people that where getting killed on building sites etc and now day what happened back then would never be allowed today and today sites are a total different experience

@bobanyfingelf 4 жыл бұрын

Awesome! As per usual!

@alext9067 4 жыл бұрын

10:02, did you think about having the rabbet overhang the small pieces around the windows/doors?

@LothianValet 4 жыл бұрын

Lifes a learning curve. Sometimes it takes a trading officer to bring things to your or anyone's else's attention. Not only for health and safety but will cut down cleaning time once finished each job

@oisincraig2625 4 жыл бұрын

My Q&A question is what is your favourite tool at the minute and why? Love your vids by the way.

@stuartcraigon2003 4 жыл бұрын

My q for q and a would be what brought you to sunny Scotland, how long were you here and where other than Edinburgh did you work? Thank you.

@gradythompson138 4 жыл бұрын

How’s the diamondback review coming along? Looking forward to it mate

@nevyn6071 4 жыл бұрын

Festool forums recommend Starmix Ipulse vacuums. I have 4 and find they are better than anything else I've used.

@ron1martens 4 жыл бұрын

Nevyn starmix impulse are exactly the same as metabo and I think Ramset vacuums. The shape is exactly the same. I do not understand why more carpenters don't use dust extraction. They certainly keep the area clean and free from the fine dust which is not good for anyone. Also cutting treated timber.

@nevyn6071 4 жыл бұрын

@@ron1martens The other brands are starmix vacuums rebranded.

@ron1martens 4 жыл бұрын

Nevyn interesting how it works. Somehow they ( manufacturers) work together. As you know metabo and hikoki have amalgamated. The metabo cordless planer is the same as the hikoki and previous hitachi cordless planer. Ramset jackhammer is also a carbon copy of Bosch or vice versa. So I'm curious to know where it all started like you mentioned. Perhaps patent lifted. The festool it a different design to starmix. One thing I had a festool and they don't lose much suction when the filters get clogged with fine dust. Gyprock sanding. Until my festool was stolen. Both these vacuums become heavy and bulky so a smaller vacuum may be more ideal for timber cutting and leave the bigger machines for brick or concrete grinding and gyprock sanding.

@nevyn6071 4 жыл бұрын

@@ron1martens a small vacuum with a compact cyclone is the ideal solution. Festool and makita are both toying with it.

@ajdizzle4shizzle 4 жыл бұрын

Great video! I am relatively new to the channel but truly enjoy the artistic nature of your videos as well as your knowledge. Not sure if you’ve addressed this in other videos, but a possible question for a future episode - How did you get into carpentry and how long did it take until you felt proficient and skilled at your trade? I am from the US and considering a change of career, thus interested in learning more...Thanks for all the wonderful content!

@ScottBrownCarpentry 4 жыл бұрын

Thanks for the kind words! I talked about it in this episode, I hope it helps kzfaq.info/get/bejne/ett5dq93y7LaaKs.html

@Spangocico 4 жыл бұрын

For the QA. What are your longer term goals? what are you interesting in trying for the future?

@lgzz4885 4 жыл бұрын

Damn it’s crazy how different countries have such different building laws & codes. In the states I’ve never heard of that. In 8min through and this is reminding me of some panels we did in a bathroom and library. Mahogany veneer mdf cut with a 1/2 or 3/4 piece added in between each panel painted dark (almost black) it have the perception of similar to the groove you cut. Same depth. We had 2-3 of up doing it. It was tough bc the homeowner wanted every grain to match. So the veneer were all straight grain up/down. It was just a bitch handling those large sheets of mdf and getting the grains “book matched”. PL glue & 15/18g. I was up on the ladder while my coworkers were down below and I turned around and there was a cop standing at the entrance on some ok wrap it up! Iduno how long he was standing there bc we were in the zone! Caught us off guard lol dope vid brother! Looks sick!

@royalfonsi 4 жыл бұрын

Never heard of this brand fisttool before 🤣🤣 Jk man, great channel!

@bannockchief 3 жыл бұрын

I swept a new home under construction, it hadn't been swept since they finished the drywall and the vacuum filter was torn so it just pumped out dust the whole time. I really wished I had wore a mask, I could feel it in my chest the next day. I imagine it will take several months before I get most of that out of my lungs.

@Parker307 3 жыл бұрын

some tiny particles stay in your lungs forever

@jedidyuh 4 жыл бұрын

What would you have done on this slanted bookshelf installation? (emailed pictures...) Thanks for your lighthearted attitude and videos!

@VC-Toronto 4 жыл бұрын

To extend the life of your vacuum filter, consider using a cyclone separator between the vacuum and the tool. I've found that it will divert over 95% of any wood dust, and about 90% of drywall dust. "Dust Deputy" makes a version, and Home Depot (US) has a version that fits on a 5 gallon bucket, called the Dustopper. Likely pay for itself in the cost of Festool filter bags alone. Not sure what is available in your area.

@M1tch1LL 4 жыл бұрын

Something weird is going on. After watching more Scott Brown Carpentry videos the more Scott Brown Carpentry videos I seem to be watching. I'm not sure if this is a good or a bad thing. I''ll keep watching and get back to y'all.

@timb8304 2 жыл бұрын

Good video, thanks. Quick question, I like your tool belt and suspenders, what kind/brand is it so I can get one? Lol. I’m always looking for a better tool belt. Looks like an occidental leather brand? I have one but it is huge on me, a thin man I am.

@whatthehellimbored 3 жыл бұрын

The last few months I've been using an airscrubber as well as the vacs. It helps a lot

@martinmcgowan89 4 жыл бұрын

you're meant to have vacs on site in the uk? never got the memo ...... ops

@stevoc9930 3 жыл бұрын

Very much depends on the site. Some of the ones i've been on the Joiners have never heard of vacuums never mind buying and using one.

@mrsabhg 3 жыл бұрын

Great video! Does anyone know what brand those red clamps are he used for holding the ply down to his bench?

@andypulford4884 3 жыл бұрын

Look like Bessey clamps

@christianstanford2924 4 жыл бұрын

Do you plan on getting the new Milwaukee M18 framing nailer that comes out in October?

@petepistachio8229 4 жыл бұрын

Fuck red china.

@jrsuk1170 4 жыл бұрын

New tool belt review 👍

@themagpie_1 3 жыл бұрын

that bench is so simple, yet so so very purposeful..

@jeffstanley4593 3 жыл бұрын

I love the music in your videos.

@justgregnow 4 жыл бұрын

Yes Q&A also are you going to do a review on the dewalt flexvolt dusk extractor? Is it worth the price?

@ScottBrownCarpentry 4 жыл бұрын

Coming soon !

@bezza1040 4 жыл бұрын

hi scott, my q&a question, have you ever been exposed to asbestsis dust? and are you worried about it?

@Invis_Space 3 жыл бұрын

Edinburgh!?!? No way! I’ve been watching your vids for a while now here in Glasgow. Never knew this. Haste ye back. 🏴󠁧󠁢󠁳󠁣󠁴󠁿

@GWAYGWAY1 4 жыл бұрын

Dust from medium density board is evil, it is fine and contains formaldehyde just the thing to do you in.

@mydv9305txdied 4 жыл бұрын

Hey Scott, what tool are you using to scribe the plywood? Thanks

@calebpeeters8540 4 жыл бұрын

what was the marking gauge you were using to score the sheets

@shanecarragher5788 2 жыл бұрын

Hey scott Quick question for you, is your vacuum an l class or m class?? I have a vacuum already but its just non big brand. Does the job, i keep it clean but i want a festool with the blue tooth because i use mostly battery,mitre saw track saw etc. Would the l class be alright for this work and cleaning at the end or the m class? Thanks Shane in ireland/cavan

@nicko198718 4 жыл бұрын

Questions: Anymore videos or updates on Paerau's shed/home build, and what was your most expensive mistake. (Us tradies all have one)

@hahayesman4619 4 жыл бұрын

What differences did you find working in Scotland to New Zealand

@statesidechippie 4 жыл бұрын

No Iron Brew at Smoko.

@Roadsaftyslowdown 3 жыл бұрын

As a woodworker I've wondered why chippys don't put a 20-200L bucket/drum with airtight lid piped inline with their vacuum saving heaps of vac bags and change time. it stays onsite nightly and won't be stolen.

@markthustrup1220 4 жыл бұрын

Hey Scott. What is the name of the drone you use in the video?

@ScottBrownCarpentry 4 жыл бұрын

GoPro karma

@markthustrup1220 4 жыл бұрын

Scott Brown Carpentry thanks😃

@higgzb 4 жыл бұрын

Scott greetings from Wellington. How's the diamondback tool belt treating you? And which one is it? I really want to get one, maybe the raptor, and I'm curious how the hammer sleeve is. Cheers

@ScottBrownCarpentry 4 жыл бұрын

Review coming very soon! It's a good belt man

@marekmroz5018 4 жыл бұрын

hi Scott ,small tip its much faster to do those "rabits" on your table saw ...2 small cuts and youre done ,advantyage is youre not changing all that wood in dust ,i always set up 1 cut run all my board thet set other cut run all again...(its realy easy on those dewalts ....mine is same as yours but run on batteries...) i tried with router ....even with spiral bit take longer than table saw best regards

@BDJappe 4 жыл бұрын

marek mroz I think for the board He’s installing @9:45 , you’re gonna want to use a router.. For me, my garage sealing is low, so that limits me. Can’t put bigger boards vertically on the tablesaw. However, in an better situation, you have a very good point my friend. I would do it just because I hate the noise my router makes :)

@ScottBrownCarpentry 4 жыл бұрын

I use that method from time to time.Super quick! My table saw tends to leave scratch marks on the smoother sheets though, router this time 👍

@qzetu 4 жыл бұрын

A dust collector would save you money and make disposing dust a lot easier. Plus it would help keep your filter clean and thus add years to your vacuum.

@sycoticdog 4 жыл бұрын

Hey Scott, carpenter from the US here. I love your channel, and would like to show my support for it out on the job site. Do you have any plans in the future to sell hats/shirts/hoodies? Thanks and keep up the great work.

@colinmcinnis3999 3 жыл бұрын

Wow, an inspector threatening to release you over that!? Man, thats a little wild.

@ianlee9067 4 жыл бұрын

Are you using a marking gauge or cutting gauge to scribe the plywood. I tried both recently and found the cutting gauge produced a better cut across the grain. Just a thought.

@paintball130 4 жыл бұрын

i was on one job where the apprentice decided to take the shop vac and vacuum up some silica dust but forgot to put the filter in... basically just shot a huge cloud of dust into the hallway

@MsElijah16 4 жыл бұрын

paintball130 😂😂

@lBBKllRAYl 3 жыл бұрын

I don't know shit about carpentry, but I like the the videos very informative and all naturaaal easy to understand. And I like workmanship, Very tidy work keep up the good work. Churr

@carpenterone3 4 жыл бұрын

I’m going to try and make your new plates early next month bro, you will see they are really nice now and you can do unlimited depth rebates without a guide. Then you can do a drop in I’m the new bench 😎👊🏽👊🏽

@ScottBrownCarpentry 4 жыл бұрын

Legend 😎

@samuelbassett5104 4 жыл бұрын

How does the festool vacuum go with the bigger tools like table saw and drop saw. I see the input to run tools is about 1200W but most drop saws and table saws are up around 1800-2000W????