Yall have the raddest family. I hope you know how lucky you are. Can't wait for the next progression of this channel 🤘

I believe challenger lifts should sponsor you guys. They have amazing lifts

Your Dad has good boys. No question the Peck Brothers will jump into action to deal with that water. Shop is awesome guys.

As far as the "track system" goes, I believe I've seen Paul from Fab Rats use one in his shop in some of his videos. Plus, he will also be building a new shop, so you guys might want to bounce ideas back and forth. Hope you guys set up soon in the new shop. Congrats and good luck moving forward!!!

I was wondering what was going on there. I saw it on KSL a while back, then it was gone, then I saw you still had it in a recent video. I'm looking forward to some good build videos now that the shop is coming together!

The shop is bussin!! Ha ha congrats gentlemen!! I need to pop over and see it. Love the setup. 🙌

found this channel from the collab with Mitch from Wildhorses4x4. Watched almost every video now, big fan! will be buying merch to help support the builds. keep up the good work!

I love your videos always entertaining always having fun.. Also love the scenery Idaho looks pretty awesome.. Can't wait to see the new shop finished..

@challengerlifts needs to comp you all a new lift(s), we all need to social media blitz them!

U guys are awesome! Glad u gettin a big shop to work out of.

Boys, the shop looks great. Can’t wait to see y’all working in there soon. I’ve worked for Costco for 18 years, if you have a Costco local to you, you could ask the warehouse manager if they have any old “Steel” uprights and beams they want to get rid of. The Warehouse I work for makes a couple scrap runs a year to get rid of old steel. Challenger Lifts supports a lot of KZfaqrs maybe they would work with you. Harbor Freight has some very reasonably priced Chain Hoists that have worked well for me.

Look for the bright side, at least you figured out you need to make a break for future snow melt BEFORE he got the house and basement finished! Love the content. Yall can make videos out of anything. Cant wait to see the shenanigans that go on in the new shop!

I can’t wait till that clip where you guys say “this area up here is gonna stay clean” is edited into a future video when someone tears something apart up there😂

Amazon has some great LED high bay lights. I can vouch for them they put out a great light. 240 watts and are dimmable. Look forward to seeing it all come together. Great work guys.

That’s a “dean” of a shop guys !!! 😮 keep up the awesome 👏🏼 work guys !!!

New shop looks killer, I dig the stepped floor design and floor plan should work great! Gonna be sweet!!

Good to see you guys doing the right thing, i haven’t tested the atlas yet but i feel good about it lol

Probably already in shop plans but a big utility sink to wash parts parts would be helpful. Looks killer

Beautiful shop! I do see one thing you should have included though. A floor drain for inside pressure washing inside. My buddy did it in Utah and was a game changer in the cold. Did I miss Brady's new Haircut? Lol

Paul from FabRats has one of them gantries I'm pretty sure.. Yall cant catch a break can ya? I really dig the new shop stoked to see the visions!!!

Two suggestions for the shop. Sink, and Urinal. No really! Great video, can't wait to see the shop progress.

When l built my shop l didn't think about a floor drain. Summer it's fine, winter with snow or rain it sure makes a mess. Sure enjoy all of your videos, my wife looks at me like I'm crazy laughing at you all. I have a 10 ton two post lift. If l had to do it over I would have went 12 ton. 10 will lift my 2500 Dodge with 8ft flat bed, but I am supper careful. Hope this helps, good luck!!!!! Stan in Sandhollow, Idaho. I'm a Samurai owner, just a hobby!

You can get all the over head crane stuff from harbor freight, plan on extending the remote cable because it's very short. Mohawk has 2 posts that operate much like the booms of a fork lift and the are made in America! Fans to move hot air back down from the ceiling in that tall building will come in clutch too

Awesome shop

Your talking about needing a bridge crane, we have them in the industrial shops I work in.

That’s a dream shop right there. Absolutely badass. I’ve only got 1 Jeep but I’d love a big ass shop to do work in. It’s getting exhausting working under a carport in Colorado winters lol

I have worked in Manfacturing where we have had several of the sliding wench systems, I would recommend putting in at least 2 of the winch track systems. once you get used to having them you will wonder how you ever lived without them. they come in handy for pulling motors and lifting all kinds of things .

The shop I grew up in had that kinda winch system. It had a large ibeam and the winch had rollers on it so it could move with a load. Also might check out the one fab rats has.

Congrats on the shop! CO buildings makes great stuff

Before my local steel warehouse shut down, they had two I beams the length of the building with a trolley system holding another I beam that was the width of the building. Two, two ton winches. You could move a 40' lift of steel anywhere in the building. Which, by the way, was 100' wide by 400' long. Best of luck 👍. If you're having trouble visualizing, look up in the top of most old barns. Most have a trolley system for moving hay.

Oh that poor beautiful home.

Challenger lifts are American made and they are in a big marketing blitz as they just gave all the southern Utah YT’ers a bunch of free sponsors lifts to Robby Layton, Matt’s Off-road Recovery, Mischief Maker, Rudy’s A&D… check them out.

Just buy a roller that mounts to the bottom of any structural I-beam. Then get a simple hand operated chain hoist. If you wanna spend a few extra dollars, you can buy electric chain hoists. Easy cheap solution for a crane in the shop. 👍👍

Need some Flex tape! Lol

Nice shop

Awesome guys, reach out to fab rats they have done good with lighting and he has a hoist to put engines in and out with ease good luck with all your doings, you guys are awesome!!!!!

I know windows in basement are nice but but you need to really plan on good drainage around them. Dad built houses for 47 years never would put windows in the basement unless they were on high ground. I know of several basements flooding and I live in Indiana. Probably one of the most flat's states. Especially if you get 5" of rain. Keep up the good videos. Love your new shop. Building a barndominium with a nice size shop up in Michigan about the same color..

The cheapest way I've done floor coating. Is rustolium 2 part epoxy. Have done a couple shops with it. My current man cave. My son did the grinding put a water base epoxy seal coat then epoxy with 16th inch flacke finished it with 2 coats of industrial urethane with aluminum oxide in it. So it's held up to gas break fluid and oil. The only spot I have is a tire mark. Have 124 cubic inch dyna with soft tires. Think I had some break fluid get on it and it left a tread mark. I believe my company shop was done with rustolium and it with stands all fluids

Don’t go cheap on the epoxy! Home Depot floor kits are junk and won’t hold up. Go with a more industrial product like Amerlock 2. It’s a 2 part epoxy from PPG. Then top coat it with Pitthane Ultra. As long as you prep the concrete correctly, this finish will out last Rustoleum and big box store floor kits hands down!

Check out Paul with fab rats he has a track system with a winch in his shop. Pulls a ton of heavy stuff with it and moves it all around his shop. Try to see how he did his.

Let me know what you are looking for as far as lighting goes. I’m sure you need some LED highbays and probably some cans or strips. With a set of prints for the job we can do a layout and photometrics so you know what direction and height to hang them along with the qty needed.

Don't skimp on your car lifts.There are lots of good brand of lifts. I've had quite a few lift in my shop over the years. Weight capacity is big deal .I had an 8000lb lift that struggled lifting a 6800lb Tahoe (it was sketchy lifting them ) and a 10000lb that was the only lift in my shop that could lift my 8600lb H2 Hummer. Be realistic you're probably not going to be lifting only Jeeps .Also the adapters that come with lifts can make it easy for you or make you worry every time you lift a vehicle! Good luck Peck Brothers . Awesome Garage!

challenger lift hands down, I have a 12k two post and i cant live with out it now

Talk to Paul from Fabrats. He uses a hoisting system on an ibeam in his shop.

Tell me what is this house inspector? Do you have drain tile around the footing going to a sump pump it with a sump pump in it😂❤ can you put cables on angles on them walls to keep them square

Tuffseal j35 for the floor, very expensive but resist everything

I’ll bet Paul from fab rats could help y’all with the overhead crane

I have the Jeep with the purple cage in Saint George. I am pretty sure it was Brady that sold it to me.

Look at Jib Cranes! I’m a big fan of them

Have yall thought about vehicle wash station?

Don't use a winch use a hoist. A trolly hoist that rides on an I beam. Budgit brand ones are all over marketplace

*Challenger lifts enters the chat*

Tell me, how are you get stuck with the combination😂 maybe you should’ve dug that swale along time ago . You could’ve stopped the water immediately with a bunch of bags of sand.

America 🇺🇸 💪🏼

see ya next time

Challenger lifts

INstall a sump pump in pops floor it will help

😢😢😢😢😢😢😢😢😢😢😢😢😢 That is Not Good

Is you guys accent fake or real you sound like you are trying to imitate Will on grind hard plumbing

Go check out dirtperfects channel has a good lift like Alex wants!

There scammer and scammers

your idea of a river is not really a river that was a trickle or a creek.some times you just talk to much ,more action please

Nice shop