Really Helpful with the little tips. Thanks very much.
@alfamusicrecord87989 ай бұрын
boss.. can you share the link of the shop that sells the coil replacement tweeter alto ts315
@DjSmoothNY7 ай бұрын
I had a pair of 315’s and even though they were loud I returned them in a few days because I didn’t want to risk having tweeters blow. I’ve since purchased the 415’s and I hope Alto has resolved those failures. We will see. Great video.
@abcdef-xb7mi7 ай бұрын
U can solved the problem above that with my idea in commenced.
@NKitchen-vy3vd3 ай бұрын
Awesome job! I appreciate that you went through it totally from start to finish instead of others doing you start here then 30 seconds later it's all apart. I got 4 of these speakers and only tested 3 but all have tweeter problems. Break out the meter and hope that's all with them. Well, out of the 4, 2 of them had the tweeter missing entirely and the other two did fail on the meter. I got them out easy enough. One trick I used this morning was with the black gunk on the screws, I hit them with a hot air gun for about 5 seconds at 200 degrees and pushed the phillips screwdriver in and came right out with no need for scraping. Once the screw is out, you can keep hitting it with the hot air gun and it'll curl right up and easy to come off.
@NathanPHАй бұрын
I had never considered that approach with the hot air. Great idea which I think I'll have to try out sometime. My only concern would be if the plastic was deformed as a result of the heat but in a short spell you'd get away with it I'd imagine. Glad to be of assistance though! --Nathan
@ehsan60028 күн бұрын
Amazing Work
@thereflexmobiledisco67007 ай бұрын
Iv just whipped out the celestion drivers in my Yamaha's and popped them in my new Alto ts412s! Alto now use redcatt drivers which are not half bad but the HF drivers start screaming when pushed and I'm having to back off the high frequencies quite a bit at gigs. Now they sound much smoother!
@mastervang20585 ай бұрын
What drivers did you use to replace the ts412 compression drivers? Do you have a link to the product?
@deanothomas18654 ай бұрын
Can you fit different HF drivers say a RCF art 912 one
@CareyMedia2 ай бұрын
Thanks a million! This just helped me a bunch!
@ericgustin33868 ай бұрын
should be putting ferrel fluid in that gap when you replace a voce coil. other than that, nice work!
@vanhorneful11 ай бұрын
Great teacher
@HabeSiphe4 ай бұрын
Much appreciated, lot learned. Definitely subscribing.
@deanothomas18654 ай бұрын
Can you say fit a tweeter that is for a RCF art 912 if they are known to blow in the ts312
@orderflowdojo9 ай бұрын
amazing work thanks
@djfridgeuk6 ай бұрын
What's the name or model of the Diaphragm
@MrAlecstarlite6 ай бұрын
Where can I order a diaphragm from please in uk
@josephmontebon724211 ай бұрын
where to buy sir? ty
@NathanPH11 ай бұрын
Generally I purchase from wherever has the best price at the time. Just do a Google search and check out who's got a good deal going. I think I bought these replacements from an eBay seller. --Nathan.
@abcdef-xb7mi7 ай бұрын
It'll burned repeat and repeat So u may connect a capacitor 400/1.5 Mf parallel with inductor.. Then it ll never burned. 👍👍👍👍👍