No video
Best SCX24 Upgrades & Accessories - Part 1
Рет қаралды 417,951
Күн бұрынToday we run through SCX24 option parts to boost performance, scale realism, or both. We'll also be upgrading our SCX24 Jeep Wrangler to see how some of these parts look installed.
Hot Racing Brass Wheels: www.amainhobbi...
Hot Racing Brass Wheel Inserts: www.amainhobbi...
Hot Racing Brass Diff Cover w/Skid Plate: www.amainhobbi...
Hot Racing Brass Diff Cover: www.amainhobbi...
Hot Racing 7mm Brass Wheel Hex: www.amainhobbi...
Hot Racing Aluminum Front Axle: www.amainhobbi...
Hot Racing Aluminum Rear Axle: www.amainhobbi...
Hot Racing Aluminum Skid Plate: www.amainhobbi...
Hot Racing Long Wheel Base Alu Links: www.amainhobbi...
Hot Racing Aluminum Tranny Case: www.amainhobbi...
Hot Racing Aluminum Front Bumper: www.amainhobbi...
Hot Racing Aluminum Reservoir Shocks: www.amainhobbi...
RC4WD 1.0" Stamped Steel Beadlocks (Black): www.amainhobbi...
RC4WD 1.0" Stamped Steel Beadlocks (White): www.amainhobbi...
RC4WD 1.0" Rock Crusher Tires: www.amainhobbi...
RC4WD 1.0" Rock Creeper Tires: www.amainhobbi...
RC4WD 1.0" Super Swamper Tires: www.amainhobbi...
EMAX 12g Servo: www.amainhobbi...
Aluminum Servo Mount: www.amainhobbi...
RC4WD Chevy C10 Inner Fender Set: www.amainhobbi...
RC4WD Chevy C10 Step Sliders: www.amainhobbi...
RC4WD Step Sliders (Style A): www.amainhobbi...
RC4WD Step Sliders (Style B): www.amainhobbi...
RC4WD Roof Rack: www.amainhobbi...
RC4WD Roof Rack w/Light Buckets: www.amainhobbi...
RC4WD Roof Rack w/Light Buckets & Ladder: www.amainhobbi...
RC4WD Headlight LED Insert w/LED's: www.amainhobbi...
Snorkel: www.amainhobbi...
@kasso187 3 жыл бұрын
"exhaust snorkel" hahaha...
@cesaralexisvalenciamontano7861 3 жыл бұрын
same, i was like wth! lmao
@matts3690 3 жыл бұрын
Also 'light buckets' was funny
@thepaultergeist8261 3 жыл бұрын
Lmao 😂
@Orly105 3 жыл бұрын
I think he just had a brainfart and said the wrong thing, atleast i hope lol.
@notsofast5495 3 жыл бұрын
I actually had to fashion of a real exhaust snorkel for my full-size 1956 CJ-5 due to a long deep water run. Stock 4 cyl creeping at idle through the deep water would want to die out. Exhaust snorkel clamped on and off I went
@jknewb6276 3 жыл бұрын
Ignore the dislikes, this video is nothing but useful information. The 24's are great products and Brett is showing us awesome upgrades. Thanks Brett appreciate your time!!
@gunsandcommissions 3 жыл бұрын
I'm convinced that dislikes on Brett's videos are done by little kids who got their hands on mom's phone and are randomly clicking
@jknewb6276 3 жыл бұрын
@@gunsandcommissions that could be true.
@mikej8832 3 жыл бұрын
Probably just SCX24 haters... The more I see of them the more I want one but I think I'd need a 3d printer if I did.
@jiakabery3550 3 жыл бұрын
This video infuriates me! Because of this video I've spent more money on my SCX24 than the purchase price of the car. LOL Just kidding. Not mad at all. As a matter of fact, it's one of my favorite RCs.
@MelbourneExclusive0 3 жыл бұрын
@@jiakabery3550 what did u upgrade?
@chaotictattoo 3 жыл бұрын
I used to own a crap load of 1/10th scale crawlers and sold them all. Now that I’m getting back into the hobby this is the scale I want
@rjechols2059 3 жыл бұрын
I also got out for a while and came back with an scx24, got the green c10 and I'm loving it! Only problem I've had after a month of ownership was the stock motor gave up on me. Replacement is only 8 bucks and is pretty easy to change out though
@short_series-t4r 3 жыл бұрын
Who is also watching the video with out even haven the rc car
@GageDrums 3 жыл бұрын
I think I'm getting it for my birthday so I'm already looking at ways to blow money on upgrades😁
@masondavid8398 3 жыл бұрын
@@GageDrums same...
@jordanstevenson1945 3 жыл бұрын
mine is at least ordered lol... well, backordered.
@minmis8769 3 жыл бұрын
*having*
@marakasalt 3 жыл бұрын
Me but i have order the car
@framebrain 3 жыл бұрын
Brett - thanks a TON for your videos. I have not yet bought my first RC crawler (or any RC for that matter), and videos like these are really helping me make an informed decision!
@AMain_Hobbies 3 жыл бұрын
Excellent! Happy they've been helpful for you and thanks for saying so. If you come across anything specific you want to know or ask, hit me up Brian! -Brett
@hemitj 3 жыл бұрын
Awesome! Thank you. Just wish the tire options were of the same size as the sock tires. I do love the look of the Boggers!
@AdrenLnFueledScholar 3 жыл бұрын
This video is exactly what I was looking for!! A very solid source of information on many things scx24!! Thanks Brett and A-Main Hobbies!!
@erictaylor8844 3 жыл бұрын
Just got one and now right on time here’s the upgrades video 🤩 thanks A Main!!
@BUILTLIGHTWOUNDTIGHT 3 жыл бұрын
Hmm, be needing me some of those Bogger Tires for my two B-17 Betty rigs!!! 😎
@SSecret_Hugz 2 жыл бұрын
Fishing weights for the win
@soflorclife6970 3 жыл бұрын
Really love the Scx24’s! I made one of mine Into a 1/24 Gladiator and added a winch 💪🏼
@TurncoatTony 3 жыл бұрын
Are you just putting 1/10 winches in? I can't find anything smaller. Not that I went super deep into looking, just a few sites.
@soflorclife6970 3 жыл бұрын
Turncoat Tony I’m using is a tension style winch you can see it on my channel, but you could also get the same size servo as your steering and that would work with some modifications.
@jacobcvpi8279 3 жыл бұрын
Is that your Snap on MT in your profile pic?
@soflorclife6970 3 жыл бұрын
@@jacobcvpi8279 yes that’s my Xmaxx rocking the limited edition Snap on body 😎🤙🏼
@jacobcvpi8279 3 жыл бұрын
@@soflorclife6970 niceee. I didn’t know they offered that body, I seen one here at a crawler meet the other day and thought it was custom.
@Rc-ho4sv 3 жыл бұрын
Got a white rubicon version last week ! Great timing .
@NiklasAdv 3 жыл бұрын
Scx24 and my x-maxx is probably my all time favourite rc cars.
@Sedonapass 3 жыл бұрын
I just finished building my drift rc car and now i see this. another project!!
@christopherdosh1999 2 ай бұрын
Loved this video literally just ordered this with weights for my first crawler excited
@wingmangaming2043 2 жыл бұрын
Crazy how far these have come
@TurncoatTony 3 жыл бұрын
Just started modding mine. Beadlocks, rok loks and brass hex adapters and it's crawling like a beast.(c10)
@tygger420 3 жыл бұрын
I'll tell ya, I got both HR diff cover front and back and the 9 gram HR inner brass inserts all the way around and could notice a huge difference immediately.sovmuch more stable and not so top heavy for the Jeep I should add yes I have the Jeep lol.going for the snorkel and maybe the HR front bumper.happy holidays to all you mini 24s out there.be safe
@cyborgduck9594 3 жыл бұрын
Wtf is that link dude. And why is it not safe?
@truthhurts3524 3 жыл бұрын
Man! I really wanna get one of these little bad boys.
@kurisu7885 3 жыл бұрын
I've been looking at mini crawlers and this video has been incredibly helpful.
@AMain_Hobbies 3 жыл бұрын
Glad to hear it! -Brett
@TheWright1 3 жыл бұрын
Awesome little crawlers they are a blast to drive
@wingmangaming2043 3 жыл бұрын
I have the white beadlock with the Mickey Thompson’s and I love it
@pants7241 3 жыл бұрын
Very cool thanks for making these videos! It really helps keep the hobby fun and exciting to look forward to!
@rcrolling3714 3 жыл бұрын
8:33 - 8:40 - Great Upgrade!
@rcpride4065 3 жыл бұрын
Those rims look sick on the jeep!
@bachirbattache2997 3 жыл бұрын
We really need scx24 Jeep Wrangler door handles, ( and other scale parts) and more important if you can activate your connections booklet, « oil filled shocks » arround 40mm with maximum flex capability, impossible to find on the market. Carisma MSA-1a are toooo tall 😝😝😝, very nice crawling car 👍👍👍👍👍👍 and seller 😋 PS: Club5 Electronic Cyclic Switch ( Dual Output ) has to be on your upgrades list 😉
@marymalone5188 3 жыл бұрын
Little crawler's are cool. Your truck looks better than I've ever seen an scx24. Keep up the good work!👍
@AMain_Hobbies 3 жыл бұрын
Thanks Mary! -Brett
@ReadySetRC 3 жыл бұрын
Killer upgrades🔥🔥
@Gabrielslegobuild 3 жыл бұрын
Exhaust snorkel?.... Maybe you need to top up the blinker fluid first
@calebboender5208 3 жыл бұрын
No dude you have to rotate your blinkers
@calebboender5208 3 жыл бұрын
😂
@HughTexJudd 3 жыл бұрын
hah, i had to rewind it..my man, you know RC backward and forward, but that exhaust snorkel ...
@rccmrccrawlermods4517 3 жыл бұрын
Great! It is a great RC indeed... Thanks for the options!
@lose2live 3 жыл бұрын
Need one for Christmas just so I can upgrade
@iPilott 3 жыл бұрын
Wow! "After" looks waaay better. Whats good Brett from AMain🍻
@Lucas-hk6gn 3 жыл бұрын
They were thinking about how amazing this video is and how they wanted to sub and looks at all these parts and accidentally pressed disliked instead of like, GREAT video
@DFDuck55 3 жыл бұрын
7:00 That's not an exhaust snorkel, it's an air intake snorkel.
@masterchief586 3 жыл бұрын
Sweet, I will have to pick one up perhaps.
@dontdoitrcs2348 3 жыл бұрын
I just went all out on these upgrades 💯×9 🤓🤘🤘
@misplaced4now 8 ай бұрын
Great video with lots of info all in one place. Disappointed to hear the snorkel called an exhaust snorkel. That’s an intake snorkel.
@jimbo4203 3 жыл бұрын
The scx24 has been a great truck, super reliable and fun. Still suprises me the crap it will get over !
@NorthCarolinaRC 3 жыл бұрын
You don’t need the servo mount for the emax. I have 5 of these things and run emax in all of mine.
@cartergurdak3254 3 жыл бұрын
Good to know, thanks
@247wingmaster9 3 жыл бұрын
So the stock servo mount WILL work with this emax service?
@foellerd 3 жыл бұрын
Lol, would it kill you to elaborate. Obviously it isn't a exact fit so what did you do there buddy.
@glennelzinga523 3 жыл бұрын
Great video, ..thanks! I'm just curious as to why you chose not to add the step sliders.. tia
@ziggyzbeak 3 жыл бұрын
I like the upgrades except I don't want smaller tires Thanks for sharing Brett. CHEERS
@AMain_Hobbies 3 жыл бұрын
I hear you! It is hard giving that up. -Brett
@jochenweisel8612 2 жыл бұрын
I like your voice dude. It is very pleasant. Thanks for sharing the information 👍
@robertoramos2728 3 жыл бұрын
The stock axial Nitto trail grapplers definitely fit on rc 4wd rims I have them on rc 4wd rage beadlocks
@suemisslbeck7023 2 жыл бұрын
I am elated to find this video-exactly what I was looking for. Thanks Brett for giving very useful information. AMain has become my go to vendor for SCX24 parts and ideas on how I could accomplish the look I am going for with the Jeep Wrangler.
@DjPrimeDUBz 2 жыл бұрын
I just got myself the c10 grey and I love it ! I’ve added a few aluminum parts. Front bumper with red tow hooks. Aluminum rear bumper. Black Rhino steel wheels with some Mickey Thompson Baja Claw tires !
@mattmac2488 2 жыл бұрын
I just ordered one of these trucks. Can't wait to get it and start upgrading it!
@AMain_Hobbies 2 жыл бұрын
Nice Matthew! Congrats on the new truck and I hope it arrives soon! Do you have any upgrades or modifications planned? -Brett
@mattmac2488 2 жыл бұрын
@@AMain_Hobbies new shocks, brass diff covers, brass wheel weights, a few other goodies... Thanks for replying. Love your channel and website!
@AMain_Hobbies 2 жыл бұрын
@@mattmac2488 Excellent and thank you. Enjoy the truck and let us know if you need anything. -Brett
@apoc-design 3 жыл бұрын
Anybody else having an issue with the charger failing? Is Axial planning to remedy this? I've heard it's a common issue.
@AdventureSparks 3 жыл бұрын
I just bought a axial scx24 Jeep it came 2 days ago and I went to charge it and the charger is broke... I got it from model-sports.
@apoc-design 3 жыл бұрын
@@AdventureSparks Yeah! I recommended this for my nephew and they've gone thru 3 chargers now. WTF? I'd really like to see him get into the hobby (and I want a couple for myself) but that sucks. RTR SHOULD mean it's pretty bulletproof.
@druchii89 3 жыл бұрын
Replaced mine with a Spektrum S150 & an ICS3 -> JST adaptor bought from Amain. Works a charm, charging at 0.5A! Recommended. Though ironically, my stock charger is working fine after about 20 uses still....
@jeffreyrodriguez3356 3 жыл бұрын
I also had problems with the charger on the second use it literally melted itself. I called and they did send me another. But yeah I used my own hobby grade after that
@xIhreDudheitx 3 жыл бұрын
Mine broke on the second use. Today they send a new one.
@sensiblynumb 3 жыл бұрын
good vid thanks for putting this together. Thinking about grabbing a SCX24. fyi. IRL the snorkel is for intake and not exhaust
@damianrandell6233 3 жыл бұрын
Watch me fit that roof rack on the c10. Will just have to 3d print some bars to attach to it and go into the bed
@tjenkins1126 3 жыл бұрын
Love the content guys! How about a vid on backyard bashers? You know smaller scale RCs, that carry some speed and can launch off small makeshift jumps. All the ARRMA and the like stuff is great, but hitting 60 in the backyard isn't happening.
@twotone85 2 жыл бұрын
I hate modern rc for being only speed focused, the hobby in 80s was definitely better!
@pieman12345678987654 3 жыл бұрын
Just got mine. My first thought was about how I can put some washers on the wheels to make them heavier. It's a little bit to easy to flip over and it seems to have plenty of torque because the gear ratio is astronomically low.. it must go less than a half a mile and hour.
@randall4411 3 жыл бұрын
I needed that video ....Thanks .
@michaelyolch79 3 жыл бұрын
Brett, you are a GREAT asset to AMain, and to the entire RC community. As a new addict to RC, I sincerely appreciate your exceptional style in delivering the videos you create. THANK YOU!
@AMain_Hobbies 3 жыл бұрын
Thank you Michael! Happy to hear the videos are helpful. -Brett
@OffRoadRC918 3 жыл бұрын
Awesome ❤🧡💛💚💙💜🤎🖤🤍
@matthiaskellner910 3 жыл бұрын
amazing video!
@joss67uk 3 жыл бұрын
Yes Id like them all please LOL Looking forward to seeing the SSD wheels....
@lorenzfriedmann2829 3 жыл бұрын
Dude I wanna put ALL the upgrades on it omg
@foellerd 3 жыл бұрын
I added a 3rd channel "auxiliary module" so I could use the stock controller to turn the stock lights off and on using the channel 3 switch. I tried to get the module as low as possible but it does add a bit of weight up high. Reason being when im running inside I can turn the lights off so I don't blind my girlfriend.
@TheTekSone 11 ай бұрын
Just purchased the white one last night
@EliKazmaier 3 жыл бұрын
I really like these trucks. Brett, would you buy one? Are they fun indoors? Are they worth the price?
@AMain_Hobbies 3 жыл бұрын
Oh yeah, it's a great little truck that's a ton of fun. For guys already in the hobby, this is a good supplement r/c for when you can't get outside, when your traveling or whatever the case. For beginners, it's a great first r/c too because its so easy to drive and use. In our mini crawler shootout the SCX24 was the best performer. If you haven't seen it, you can check it out here: kzfaq.info/get/bejne/brNzopaVsrGqZmQ.html
@EliKazmaier 3 жыл бұрын
@@AMain_Hobbies Cool. I already saw your shootout video. Thank you.
@Sp0inkVR 2 жыл бұрын
i love your website i love looking at all the parts a upgrades
@AMain_Hobbies 2 жыл бұрын
Heck yeah! Let me know if you need help finding anything. -Brett
@Sp0inkVR 2 жыл бұрын
@@AMain_Hobbies What is a good beginner crawler because my friend has a SCX24 and he just lit his esc on fire by accident and he said that the SCX24 is bad so i kinda wanna get one but i'm not sure?
@MelbourneExclusive0 3 жыл бұрын
Which Scx24 body has the most accessories for it? Thanks in advance!
@noob2510 3 жыл бұрын
I just bought one because of your videos and I love it :D
@AMain_Hobbies 3 жыл бұрын
Great, enjoy! -Brett
@rueagonvyceratops2879 3 жыл бұрын
the element 25 scale needs some love too on upgrades , i dont want everything to be axial only . because i have a little element 24rth scale crawler.
@gunsandcommissions 3 жыл бұрын
You know I'm gonna come in here and drop some likes and comments my dude!
@AMain_Hobbies 3 жыл бұрын
Oh yeah! -Brett
@lucky2000m 3 жыл бұрын
Awesome vid . I want to upgrade the motor to the barrage .050 , would you recommend breaking it in before useing ? Thanks
@tuffgong83 3 жыл бұрын
Did you remove the foam from the tires before mounting them? I have heard that some tires run better with no foam in the SCX24
@AMain_Hobbies 3 жыл бұрын
No we didn't. But since they're beadlocks, we might give that a go! -Brett
@tuffgong83 3 жыл бұрын
@@AMain_Hobbies I installed the Rock Creeper with no foam, great results!! Definitely the way to go!
@zGuy-yp6um 3 жыл бұрын
Just installed my rc4wd tires and wheels went with the rc4wd bfg km3s no foam is the way to go for sure these trucks are pretty light so no foam is fine.
@AMain_Hobbies 3 жыл бұрын
@@zGuy-yp6um Ok, good tip! -Brett
@old-rcplane-phart 3 жыл бұрын
If I remember correctly, the snorkel goes n2 the intake. (Previous military)
@AuthenRodica 3 жыл бұрын
Yes it is to prevent flooding of the engine when Intaking air. The exhaust pressure is enough to keep the water out.
@aydendelrio5226 3 жыл бұрын
Should I get a mini t 2.0 or an Everest 10 crawler I have been debating since the mini t is small and portable and good for quarantine or the Everest so difficult to decide! considering I have been in the hobby for a while I feel like since I have never been into crawling I should get the Everest 10. Which do you guys prefer for the price?
@Rc-ho4sv 3 жыл бұрын
Im in crawling . and id say skip the everest for a different crawler later when you can afford more . And the mini t 2.0 now . lots of upgrades for it aswell . i have the blue mini t 2.0 . very agile and surprisingly durable ....
@aydendelrio5226 3 жыл бұрын
I could definitely afford a more expensive crawler it’s just I’m a basher ya know and I just wanted to get a crawler for cheap but, know form what I hear from people about the mini t I think I’m getting that know considering it’s strength and part availability thanks for your opinion it helped 😎👍
@ziggyzbeak 3 жыл бұрын
I have the everest 10 and I put on a Wrangler hard body its cool but very slow . If you are a basher the 10 is not for you Very slow without upgrades. cheers
@georgekalaras9563 Жыл бұрын
I have not yet bought my firist rc crawler i want an scx24 i have a lot of toy grade rc cars and a hobby grade rc monster truck i like your chanel and your website
@alexanderseile4193 3 жыл бұрын
Great upgrades and always very informative video as always from AmainHobbies. However, I am currently very hesitant with any upgrade because this 5 USD motor keeps constantly causing trouble and needs his 3rd replacement for our Jeep already. I cannot imagine that the increased weight from the upgrades will not make this problem worse. Therefore, I am still waiting for a motor upgrade before investing money into any or all of the other parts. I assume there is still no upgrade motor available?
@B_Skeen 3 жыл бұрын
A common upgrade for the SCX24s motor is the motor for the Barrage. You are goin to have to drill new mounting holes in the motor plate but do some searches on here and you'll find many videos covering the motor install
@CaliCoastRCFPV 3 жыл бұрын
Enjoy my badass SCX24!!
@aj_scale_photograghy2120 3 жыл бұрын
Treal hobby also makes great parts for the scx24
@bjmcfarland1 3 жыл бұрын
I just got the rc4wd stamped steel black headlock wheels and super swamped tires. Now comes the hard part; putting them together. Brett you make it look so easy on the videos. How
@AMain_Hobbies 3 жыл бұрын
It took us a few tries to get the first tire mounted correctly too, but after that it gets a little easier. Hopefully you got them on there. -Brett
@RC4all 3 жыл бұрын
Great video 👍🏼
@SaSpursFan 3 жыл бұрын
Are there oil filed shocks?
@HenryThe2ndAnimator 2 жыл бұрын
I need to find a red body, yellow makes it look like a school bus lol
@Accurize2 2 жыл бұрын
I’m ready to level up. No depleted uranium options?!
@madskristoffersen7835 Жыл бұрын
Looks dependable.
@motodude1002 3 жыл бұрын
Went to the LHS to pick one up for a gift for my 3 yo daughter because the micro mt28 is much too fast for her. Ended up leaving with two!
@AMain_Hobbies 3 жыл бұрын
Congrats Jeffrey! You and your daughter are going to have a great time! -Brett
@chriscasterbassmaster Жыл бұрын
Intake snorkel, not an exhaust snorkel, bro. And the wheels do not immulate "beadlocks." They immulate old Steeles, i have them in Chrome. Also, have some that have actual beadlock wheels also. Good video, man.
@hobbycow5346 3 жыл бұрын
Great upgrade list! Easier to navigate than the website!
@jimmyalmaguer9339 3 жыл бұрын
I'm thinking about asking for the c10 for Christmas
@tylertarr9939 3 жыл бұрын
Just did lol
@bisayainamerica7707 3 жыл бұрын
Keep it up!
@ebele.ebele420 3 жыл бұрын
on my way buying scx24
@pcx4545 3 жыл бұрын
At 5:27 you can tell that the tire is not well fitted to the wheel, i've read on some forums and in Facebook that mounting RC4WD tires on those RC4WD wheels is a PITA, also at 7:01... WTH is an "exhaust snorkel"??
@AMain_Hobbies 3 жыл бұрын
It's true, the first time you mount those wheels it's a pain. But after a few times doing it and getting a system down, it's easy and not bad at all. For the snorkel... just making sure you guys are paying attention. -Brett
@Bandit-ts6hb 3 жыл бұрын
got it too
@blakekuhn5 3 жыл бұрын
I got an emax servo for my latrax and I have to say if you're looking for a metal geared servo get an emax!
@doctorhelicopter 7 ай бұрын
Those Sunraysias might look ok on a Deadbolt, but doesnt look scale to me on the Rubicon. I have generic/RGT 46mm swampers on mine
@DavidFernandez-sc5ws 3 жыл бұрын
Still waiting on that SBR 2.0 video
@xx1uk3xx54 2 жыл бұрын
I didn’t care about watching this before now that I have a jeep ordered I wanna buy everything good for it
@kevinvanderhoef7806 2 жыл бұрын
So I know that some parts and upgrades are NOT cross compatible, but I'm wondering if the jeep and C-10 things are, like a front bumper, or links, or things like that.
@AMain_Hobbies 2 жыл бұрын
Yeah, you bet. Some items, which are not dependent on the body style or wheelbase length, should be cross compatible - like bumpers, shocks, diff covers, etc. Links are wheelbase dependent and will need to be the correct wheelbase for your model (Jeep and C10 share same wheelbase though). -Brett
@lifeinrc9051 3 жыл бұрын
Thanks for all the upgrade info I do have a question as I'm new to the rock crawling hobby. I notice that majority of the crawlers run on brushed motors, why not brushless?
@AMain_Hobbies 3 жыл бұрын
Brushed motors do a great job in crawlers because they're smooth, have good torque and they're inexpensive. Brushed motors also perform well in water. You'll find brushed systems in RTR crawlers mainly because it's less expensive than brushless, yet still very capable. -Brett
@lifeinrc9051 3 жыл бұрын
@@AMain_Hobbies Thanks for the reply so I take it then no brushless and stick with brushed motors.
@901steammachine2 2 жыл бұрын
Great video. Thanks *intake snorkel
@wilarsuki 2 жыл бұрын
Note: mickey thompson baja claws don't fit on the stamped wheels.. and the are also offered in chrome
@Why-lb2zn 3 жыл бұрын
Can i just buy it with all those upgrades 🤣
@fernsolo 3 жыл бұрын
Very nice👍
@Dia1Up 3 жыл бұрын
I think the stock tires look WAY too big. I wonder what the scale measurement of them is..... something tells me it would be bigger than 35" tires
@jonathanyoon8651 3 жыл бұрын
Awesome video, now I know where my money is going. How durable are the mirrors as far as roll overs go?
@AMain_Hobbies 3 жыл бұрын
They have a little flex to them but I can't see the weight of the truck crushing them in a roll over; they feel stronger than that. They should hold up. -Brett
@Nicolas08299 2 жыл бұрын
Did he use rear brass knuckles?
Cape Crawlers
Рет қаралды 177 М.
Cape Crawlers
Рет қаралды 39 М.
RC Review
Рет қаралды 120 М.