If you find any unauthorized reproduction of the JSK-koubou video, please report it to me. Thank you. JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。

One aspect of your videos that makes them so good is that you begin by showing what you are going to build and its use. Then you demonstrate how make such a device. So many others don't let the viewer see what is being made until the end.

Every maker has a signature tool they often use. I just discovered this channel, and it looks like JSK-san is a big fan of double sided tape. Excellent saw guide!

Wow, I just looked at this simple track saw jig for less than 30 seconds, and could instantly see how effective and simple this great jig is, - Excellent, and thank you.

Non ce n’est pas un guide de plus......mais le guide intelligent qu’il faut avoir !! Bravo c’est toujours un plaisir !!

Decelerate! Calm down! Come down! etc. these are the words that come to mind. I could watch and enjoy the gentleman for hours. He convinces without words! 🐌📐😎

You make the best shop-built tools on KZfaq and then make the best videos about how to make the tools. There ought to be an award!

Mad respect for your wonderful craftsmanship. Respect. From Australia.

一番注意したい「せん通り切る」のに良いですよね！素晴らしいです！

This is by far the best CS guide I have seen I'm building one tomorrow! Thank you

This is the cleanest, shiniest circular saw on KZfaq.. Great vid and “setsquare tool”! Thx

Watching master craftsman JSK-koubou is like zen meditation. 110% mindfulness. I wish I had 5% of his skill.

手、そして手際が綺麗で落ち着いて観ることができました。 こういう人に、私もなりたい・・・。

I have a tracksaw, which is great until material is smaller... like this size. Great jig, I'm going to add one to my kit. Thanks from Australia!

What a pleaser to watch a real craftsman at work, everything so beautifully demonstrated without using any words of explanation, full respect for making all your own shop equipment, so enjoy watching your channel, keep up your great work. indeed, full Respect..... from Australia

I have a circular saw that I've always found awkward to align for cuts. I was looking into the possibility of getting a table saw instead to the rip cuts that I was doing with the circular saw. On seeing this video, I've decided to hold off on that idea and build one of these instead. I don't normally pay for plans, but this time I decided that the jig is that well designed it's worth getting the full drawings and instructions to use alongside the video. The demonstration and construction walkthough is excellent and I feel that even I can complete this project.

The workshop and tools look fantastic in the video, loved the clean wood look everywhere...we need a tour of your workshop on its own please. I'm a starter DIYer but found this very useful

So perfect! Watching your videos is so relaxing and I always learn something new and add a new project to my Todo list... Thank you so much for your aesthetic videos, perfection, ideas and clean explanations without using any word! I'm a fan of your work and style! You are a true craftsman! 🙏

Ich liebe es, deine professionellen Leistungen zu sehen ! I love watching your professional performances !

Great idea! You set a calm mood in your videos, It's really pleasing to watch.

いっぱい手作りで素晴らしいです。素晴らしいアイデアをありがとうございます。

Hello, greetings from Mexico, I am a newbie in carpentry and after seeing countless videos to make a guide for circular saw, this one seemed formidable, and I already executed it, and it works wonderfully. Arq. Gabriel Hernández

No background music or talking. I am surprised at how much I like this! I am learning a lot just watching your detailed videos. Thank you!😁

今英語で字幕を作ってくれてありがとう Thank you for doing your subtitles in English now! You are a joy to watch!

I can watch you work all day. You are an incredible teacher even without words. I need to build one of these soon and will use your plans. not sure how ling it will take to get to the US from Japan but I'll try.

The absolute best DIY version I’ve seen yet. Why not mane a smaller version though for cutting smaller stock. Love all the DIY tools.😊

A true craftsman, such a pleasure to watch. An admirer from England.

Thanks so much. Made one and it turned out perfectly. I use it all the time

His circ saw seems to stop instantly with no wind down. Quality stuff. I love all of these videos. The Bench top jointer from a hand planer is my next project.

Aqui no Brasil consideramos isso simplesmente um SHOW DE BOLA. GENIAL... Parabéns. ...

you're genius! Silent demonstrations and easy to follow. nice work.

ENTschleunigen! Beruhigen! Runterkommen! usw. das sind die Worte die mir einfallen. Ich könnte dem Herren stundenlang zusehen und genießen. Er überzeugt ohne Worte! 🐌📐😎

Your timber drill press is brilliant! I’ve subscribed and can’t wait to settle down with a cup of tea and watch more. Many thanks.

Brilliant, I love how careful and considered you work.

Great job. Thanks for sharing. So, I have a suggestion and a challenge for you: Build a wood thinning using a planer. Will be necessary three axes X,Y and Z.

- Truly enjoyed the lessons & intro to the handsaw. Excellent info. Thanx 4 sharing.

It just looks so easy, when you doing it 👍🏻 you’re a Master, love all your staff.

Genius .... thank you for being so uncluttered in your presentation ....

Very nice. I built the first version but not having the same level of precision as JSK, the guide on mine wasn’t square. I will make the modifications to match this version. Thank you JSK-KOUBOU! I love watching your channel. I have my eye on making your jointer and router table

So gentle..clean and precision ...and thoughtful turn the simple work to art, japanese way ....

Very tricky and very efficient. Congrats on your great job. All the best.

4:30 I love that saw!

Very clever. You can probably come up with a couple useful purposes for the angle cut side as well. Maybe some speed-square utilities on it. I guess that would require some sticker printing to look as professional as the rest of it.

Toujours aussi fin j'adore vous voir travailler. super👌👍❤️

I love what You do - meticulous - highly careful and precise - I would love to follow the videos - unfortunately no specific metrics follow!

Doing remodels I have to cut a lot of doors. This would also work well for cutting siding. It’s alway too flimsy to feed into a chop saw. Decking is yet another good use. I always fasten my decking long then snap a line and free hand the perimeter. This tool would keep me on the line much easier. This is pretty damn cool.

So many good ideas in such a short video! Inspiring.

Your work is so professional. Fantastic job as normal

Mad Respect from Newzealand...🇳🇿🇳🇿🇳🇿🇳🇿🇳🇿🇳🇿 Amazing Skills...Kudos Mate

he is gifted .all his clips are outstanding

神アプデ！w 縁からチラッと覗く黒いところが、ラインに合わせやすそうなうえに、張替えていつでも新品の状態に戻せ、垂直の微調節も後からできる！ これは、長く使い続けられる良品！ あと、スタイロフォームも何気に便利そうw

Thank you grand master! Perfect job.

Brilliant even though I use my festool mostly I’m still going to make this 👍😊

Im am leaning back and relax and just watch how you work. Everytime a great moment watching great work

Yes Japan makes the best Quality tools. You have my respect Sir.

An excellent idea. Thank you! 👍🏼

Finally I found a channel I can binge watch AND learn something at the same time 😮

JSK, you are truly an artist!

You are a very precise worker, you have my respect sir 🙏🙏

Most Excellent!!! Perfect for those who can't afford the $500 Makita Track Saw, or the $800 Festool.

Thanks for sharing your skills, very useful. I’ll give it a go when it’s dry again. (My drive is my workshop). Happy New Year to you, hopefully Covid free 👍👍

i really like japanese craftsmanship very smooth and the quality is great. i learn a lot from your video.

I loved the simplicity of this its brilliant and an awesome DIY tool you made, thumbs up to this great video, I subscribed, I will save this video, and use it later. Thank you for this great video, I want to see more. Laura in uk

Excellent.. The best guide I have seen on KZfaq

La mejor guia, saludos de Ecuador, gracias por estos aportes

Clever design. Thanks for sharing!

Muy buen trabajo, gracias por compartir, tus conocimientos...

It is a simple and easy to create tool. And it's a great tool for working with precise dimensions.

It is Zen to watch your videos over and over.

best canal about woodcraft ever. Best wishes from Russia

More sort of builders like you! Keep it up!

Super! Bei dir sieht alles so leicht und vor allem sauber aus. Hoffentlich bekomme ich das auch so halbwegs hin!

Sure am glad this channel popped up in my feed the other day.

Perfection at it's best. Are the items you make available or order & sale? Many of us do not have the required tools that you have in order to make your examples. Fascinating watch, engineering & build at it's best.

Очень полезно. Спасибо. Особый респект за чисто вымытые руки.

I love that job! Хорошая работа! Лайк. Like! From Russia!

Очень практично! Спасибо!👍

Show de bola parabéns Que Deus te abençoe sempre.. Você é muito criativo.... Orlando de Joinville SC Brasil.

Thank you.... amazing video of a well thought out simple tool. I will be making one

I Love the way you work master craftsman, just one word: Respect!

Excelente idea, muy práctica y efectiva

An excellent aid to cutting accurately 👍

Very impressive build.. cutting accuracy looks amazing.. 👍👍

I’m going to look like a genius when I pulled this out at a job site!

It’s so refreshing to see a video without dub-step music or royalty free folk guitar

To improve in this design, add a small measuring tape to the window cutout. Then you can make exact cuts by aligning the edge to the edge of the board you want to cut, marking the length inside the window, then shifting the mark to the zero mark on the tape, then cut. Perfect measurements every time.

Thanks, regards and respect from germany.

What a treat to watch your build videos. Greetings from Yunnan.

He shows how true craftsmanship transcends language.

Great job Friend! Thank you for sharing the video with us!💖👍👌😎JP

This is genius. Will be making one this week.

Amazing, this is luxury diy.

Awesome hints and tips thank you 🤙🤙🇦🇺

Proper video. Show what it can do, then how to make it. Several thing in the video caught my eye like his drill press table.

Plunge cut with a hand saw. WOW. I need one of those

Great jig 👍 first time i saw a Dozuki with a rounded tip, I think I'll order this 😍

Simple and best design. Thanks for sharing brother.

vou escrever em português mesmo, seus vídeos são incríveis, seus trabalhos em madeira são fantásticos, muito capricho, precisão, e suas máquinas construídas por você são fabulosas, meus parabéns! Honório Sergio do Brasil

I thought I had a nice circular saw guide until I saw this one. The crosscut feature is priceless! Thinking out of the box!

Brilliant! Wondering how to make this without a drill press and special drill bit.