you see tutorials problem is that they show you solution but not the principle. It's like creating fire in the jungle, one can do that with sticks another one can't do that with lighter. If you want to do something first you need to understand how it works after that you can make like rocket engine from an old car turbine.

So it didn't work for u? I wana try it out so I am curious about what happen to you trying it out

@@thokozanigwathi4249 Based on the presentation, it will really works because of the chemical component of plastic that has been filtered out by using a closed air container and a higher temperature level to melt down those plastics and making an output pipe to gather those chemical components from inside b y trapping it with water. It is called plastic pyrolysis. Plastic is very known to be much flammable and those component or element is taken out from that plastic to make it like liquid instead of a solid.

@@thokozanigwathi4249 Actually I think this should be workable project, because there was some day I was just melting some plastics around in the steel dish with higher temperature fire from the coal so I can get some mould, the dish was covered at the top and as result once I opened the the dish the fire from outside went in and there was a huge explosion as if there was some extra flammable fuel poured into that dish, then I come across this project and I learn something from what happened to me the other time

@@thokozanigwathi4249 Actually I think this should be workable project, because there was some day I was just melting some plastics around in the steel dish with higher temperature fire from the coal so I can get some mould, I went far and boil them to the extent they turned to be a fluid, the dish was covered at the top and as result once I opened the dish the fire from outside went in and there was a huge explosion as if there was some extra flammable fuel poured into that dish, then I come across this project and I learn something from what happened to me the other time

Is the fuel in the video unleaded petrol? Or biodiesel? Or something else?

@@Albert-gv2px śb

@@Albert-gv2px This is a mixture, Its petrol, diesel, and syn gas. sometimes kerosene is found. You need to process this further using distillation or any other separation method.

@@thulilerankwemoroka2923 what about wax formation

@@christopherbagde9540 ,Now a days in Sri lanka,garbage of plastic products become a burden.Very unfotunately our people of Sri Lanka,throw the plastic hear & there. That's why I told that" it helps to protect enviornment" And the other hand stil we do not herd out of these bottels,can made yarn fiber and tiles.-by products use for repair the patches of the road. And we haven't technics for the same.So thank you very much for your kind concideration. Finally I can mention that Sri Lanka face a fual problem too.Now a days filling stations limited to issue the fual to the vehicles.

@@naturesproducts-srilanka6736 Ditto. ;)

Can you tell me then how he produced the diesel?

More than likely he had that plastic mixed with proper plastics. Yield would’ve been better if he had left it out.

@@cuttiepie2584 i think it was just dumped into the tank to boil out.

But look, it did burn on the floor at the end of the clip.

Lucky is right let's not just focus on the boom or the fact that it was an inflamed liquid but rather the quality. No vehicle would last a week with this kind of product.You can try yours and see

Хитрый ролик! Шланг очень близко к огню, 45 минут такого жара он не должен выдержать. Жидкость очень сильно прозрачная. Нет весов загрузки реторты. Нет отчета выхода жидкости, хотя на пластике его не много бывает. И ещё газ попутный просто испаряется … вопрос: вы хотите делать бизнес или это хобби?

what is the name of that paste u used to seal the cylinder?

i want to give a try!

@@lukyamuzigeofrey3169 epoxy

@@lukyamuzigeofrey3169 0

Diesel crude oil

Formula one fuel.....

Excelente punto, interesante como la harías tú? Gracias

hai ragione, molto pericoloso,una cosa che ho' osservato, è un spreco nell'alimentare il fuoco, su' queste cose io non gioco, parliamo di sicurezza, io onestamente , sé mai vorrei provare, molti lavaggi , nella bombola, e il taglio,nella stessa , ho' paura, certo che provo paura, altri commenti , dopo, ciao,

signori non provate,per carità, ma' di che cosa mi devo preoccupare, in quello non per me, ma' per voi , ciao,

lo vedo giovane, è lunga là storia,waleriams031, poi cosa vi è in seguito,per il momento ,non lo' comprendo, ciao,

a bigger version of what you just watched.

the jar is placed in water pan

no sucedera, se hace en ausencia del oxigeno...

@@calloscar1948 pero con semejante llamas puede quemarla y ahí si.

Mejor usar una válvula antiretorno

filter the gas from harmful material,but it's not sure

@@andrasubori6886 its in the wrong place to filter the gas

looks like clear heavy duty PVC hose with a jubilee clip. I would add that whilst i dont doubt the process of turning plastic to fuel, i do doubt the videos authenticity. The cuts are a bit magician esk. why not camera pan or speed up the speed of the whole apparatus in action? If the input data is incomplete, so likely is the outcome.

But the container had a liquid before you started the fire?

Do you refer to the gases that escape at the end of the circuit? They can be burned off, and due to the container full of water (that acts as a "valve of no return") the risk of explosion from the container with fuel is minimal.

yes fake video. no result with PET.

@@Kolngodacentral0715 what do you mean it don't ork??? you just seen it work with your very own eyes!!!! lol

carbon

i see, you used light heat yet the cylinder has a heard body, do plastic need little heat to turn into gas

@@lukyamuzigeofrey3169in this case the absence of oxygen & a pressurized tank makes reduces the need for high temperatures.

It's just an experiment. It needs to be further developed to use it longtime. Mmm

Made a little flame thrower. So I know the break down is turning into something flammable. This is a fun project.

Teflon tape

Clay

Maida (all-purpose powder)

I think it is a some kind of rubber which is use walls for the water proffing purposes."Niplac-one pack"

I thought is was flour(dough) 😂😂😂

Muy posiblemente masa de trigo (aunque quizás me estoy columpiando un poco), o algún tipo de masa cementicia que hace un sello hermético.