I wish content creators would stop covering the natural sounds of the work being done with annoying music.

Constructive criticism: Your music is so bad and so overwhelmingly loud that I couldn't bear to keep watching. Make better videos by keeping the music slightly above audible threshold when the primary purpose is anything other than a music video and don't fade it louder. Your audience is not watching these videos for the music.

Missed a lot of steps there, making it look easy. It's not

The music makes it hard to watch

AMAZING !!!! Total skill, very impressive ✌️

3:20 лучше штилем обработать за 30 сек., чем топором 2 минуты😅

"Tutorial: Using a chainsaw like a scalpel"

Debarked log.... Straight to a turned and milled log. Wait what happened?

Nik Rijavec and Erik Granvist have entered the chat. Carrying nothing but axes.

Just saw Erik Grankvist make his log cabin alone fresh out of high school, with no prior knowledge and with only ax and saw (hand tools), some measuring tool.

33 seconds and I am exhausted!

You made that groove in that log the hard way😂

I've never actually seen someone use a template for the notching. Makes sense. Those logs are going to fit so tightly together. I've never seen a chainsaw used as a sander either.

Fantastic and fantastic work

I’ll bet this guy does wood carvings with that chainsaw too. What a talent!

9:20. Those are some nice tight joints. I'm impressed.

Для чего в оцилиндрованном бревне паз в ручную делать и работать плохим топором непонятно

Going from debarking to milled lumber without a beat was a bit... interesting.

They're probably only soft pine logs but that saw is super sharp...👍

It's amazing, how you are able to choose what tree, how to pull the log with simple l e machine, and not get hurt or splinters on your hand, legs . I am totally amazed.

Amazing skills!

Да уж! Колуном чашку рубить? Оригинально!

This guy knows his stuff. Thanks 👍🇨🇦

Awesome video, thanks :)

This is great thank you!

I would think a 2 inch timber framing chisel would be easier \ more precise than using the axe to finish what the power saw couldn't.

Great video 😍

he makes it look easy with is the hall mark of a skilled tradesman for sure very nicely done.

Pro tip: Watch in 1.5x speed.

Brilliant! Work smarter, not harder!!

What’s with the annoying noise?.....Not the Saw!

What a beautifully crafted joint.

Well atleast the fella is doin somethin creative...

And the full length of the log groove...how did that suddenly happen?

Абаригенам из джунглей до наших умельцев очень далеко

I like the floor scraper for debarking

Good video but i dont like music. I like to hear building sounds not music. Great work.

Wow this reeks of ambition. Kudos M8

On your INITIAL cuts I would've used the tip of my saw to lightly cut in the scribe lines ! Kinda like when you use a utility knife before you cut out for door hardware !!!

Good job of cutting with the chain saw.

Очень интересно смотреть как другие работают 😉

This is great, but my logs are not all from a lincoln log kit turned to a perfect consistent diameter with that nice cope right down the side.

What a skill !

this is perfect... now i just need a huge lathe for exact log diameters

You make it look like it's a lego build, but I'm pretty sure that's not the case.

Muy buena técnica de construcción...!!. Gracias !! Saludos desde las sierras de Córdoba Argentina...!!! 👍👌💪🇦🇷

Milwaukee marker or sharpie, you're welcome lol.

Мой дед за это руки бы оторвал

Топором конечно лучше бы было, и пилой так не работают, особенно паз- это что за бред.

Nice some Swedish cope and Norwegian wedge notch mixed in the same cabin Not everyday you see both styles on the same home. Was waiting to see some Butt and Pass next

Incredible hand/eye coordination

gives shivers to watch that chainsaw in action

1:08 - Well he cleaned the log with a shovel only. ))

Do you put any type of sealer or some type of covering to keep the outside weather out and the heat inside during cold and raining seasons.

All right 58 seconds in and the music drove me crazy, it was a short trip.

Всегда дома рубили топором! Не дураки были! Топор не рвет волокно,а закрывает его.

Why would you not cut a bunch of straight lines down to the blue outline? Then you could chip them out much faster and cleaner.

Nice Job, man, and ...No wonder, you are using Fiskars Ax, Made in Finland, best in a World !!!;o), and,..yes I am a Finn, here in South Florida, and my GrandFather and his brothers, they were very Famous Builder group for big LogHouses, Laukkanen Brothers,.... in Northern Finland, 1920',30', 40, 50, and some 1960', they built more than 30 big School and other State buildings, which are still straight, and Up !!=), I usually spend couple nights in a Log Cabin, Hotel on a Lake, at Arctic Circle, which Main Building and Sauna they built 1952-1954 !!

Felicitaciones que buen trabajo una elegancia

Um belo trabalho. Mas gasta muita madeira pra pouca coisa.

Peel logs in spring when the frosted winter sap begins to run. Easy to remove. Let logs air dry.

The notches look like they're level. Will you slope the notches to drain water out and away?

Well the saw is sharp. But log house building has come a long way since the fifties:)

When you appeal in the logs I thought you were building but I see you have milled them all into great big dowels

Dang dude did tou come up with the idea to knotch the logs that way ? Great job

Приятно посмотреть спасибо!!!

Pfuuu Excelent video! Direct like 👍 from România 😉

Awesome peeler ! Much more effective than a draw knife !

Wake up! That is the way log cabins are built. Where have you been?

Awesome just subbed!! 👍🏼👍🏼

Try doing all that work without a chainsaw, stihl no less!

400 years later, still cutting with a chainsaw. Clickbait sucks, nothing in title is even true.

This is so cool. I've always wanted to build something like this 😎

Не, от топора дерево добрее получается! А жужжалки эти........

Was anybody else bothered by how overcut that notch was?

Pekná práca chlapci

You had me until you pulled out that dull axe lol

Minor point, but if the notch was cut on the top of the log, rather than the bottom, the log would sit with more stability on the saw horse, & wouldn’t need shims

Скобой крепить чтобы бревно не качалось

If you're reading this before you have finished the video just don't bother watching it. Bad technique, doesn't show finished product it's just cutting up some wood and doing a bad job of it for 11 mins

Good video and good skills

Сразу видно. В РФ делают :) Только у нас могут заказать цилиндрованное бревно, а не готовый комплект, как в других странах.

It's nice the tree gods make all the trees the same diameter so your juig fits exactly. In my part of the world the tree gods need a jolly stern talking to.

Да проще еще пару надпилов сделать, чем так долго выдалбливать колуном

Но бетона го обичам и гипс аз ги съчетавам и става супер топло и уютно

А так понимаю,это видео"как не надо делать",особенно бревенчатый паз.

Молодцы!

روعة Fine

In Deutschland wär in der Bauphase einfach über Nacht das komplette Holz weg

You would never clean the bark off a spruce or pine from s Dakota. Branches every foot at least

Даааа, насколько облегчает труд простая бензопила, а раньше всё это делали простым топором!!!

Use a reciprocating saw you will get a better fit

Dude that chainsaw is running lean.

Very interesting but no explanation before each one before which I do like to hear. Nevertheless good job thks for sharing!

Man this guy with the chain saw had me on my toes... that saw could have jumped back when he was smoothing the surface and cut his leg wide open!!

Нифига себе колуном вырубают а где топор?

video is good except back ground music.

You boys would make it in my log yard or any log yard that I've ever work in. Tight joinery aint you forte.

Wow nice work" Fruits of the labor goes to those who labor"

Well we see why he uses the chainsaw after he picked up the axe lol