Nice! thanks for the comment!

​@@MrGamb did you put water in pipes and if you do how much water "half or more or less". Sorry for my english.

❤❤ pencetnya berapaan mesinnya❤❤

​@@ahmadmubasyir5853⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran

​@@ahmadmubasyir5853⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran

Thank you very much!

Thank you very much!

Simple and effective! Did he solder the bottom copper tubes to the can bottom to seal?

valeu irmão!

Thank you very much!

O mano do vídeo é brasa

Obrigado Amigo! abraço...rs idem

Thank you very much!!

MANO NASCIDO EM 1951.

Thank you very much!

Велике спасибі!

👍

¡Hola amigo! si el calor es muy intenso se derrite si!

the inclination of the boiler has to do with the accumulation of steam in the highest part! and also to facilitate the release of excess heat from the flame, which in my case could melt the solder on the tube, tin is not a good option for this! but if you don't leave a very strong flame it works! I used 5/16"! For the size of the boiler, I think it's the most appropriate measure! I don't have much knowledge on the subject... I hope I helped! Thanks for the comment! Hugs...

@@MrGamb Thanks for the reply. My experiment only worked briefly until the solder blew out near the flame. Plus the .006" (.1524 mm) thick lid wasn't flexible enough to pop. I'm trying to figure some way to lock in a soda can Aluminum top inside the ring of the boiler. It's becoming somewhat harder to construct this design than many videos show. I haven't tried Silver solder, but heat required may deform everything. Still trying. Thanks again.

@@MrGamb I built it many years ago, but now I realize why mine didn't sound, I'll try one more time, thank you Mr.

@@MrGamb - ”the inclination of the boiler has to do with the accumulation of steam in the highest part”, but the protruding ends of the pipes should be there too, otherwise the water would be thrown out also, hence the inclination of the boiler should be the opposite way. Nice idea, anyway! What about using lighter pipes and with nozzles, to increase the speed of the steam, the inner pressure, the temperature of the steam and the energy of the jet?

You can hammer the outer ends of pipes around a needle to get nozzles, then you can load water with a syringe.

dude...try it, I hope it works!👍

Maybe add a sound damper to the top. Definitely will be loud.

🤣🤣🤣

Captain Kirk: Engines at full speed. Scotty: We can’t go any faster. Spock: Interesting indeed.

Great idea! I will think about it. 😉

@@MrGamb Thanks. I should subscribe for your next videos 👍

Yeah with no exhaust. Seriously a Harley with no exhaust is loud and almost bubbly sounding.

I used a piece of lubricant spray can

Как он работает ? Ведь система замкнутая, откуда двигатель берет воздух?

@@our_Petersburg Там нет воздуха, он работает на воде - сначала в установку заливается вода, потом её нагревают.. Вода при нагреве расширяется, - и выходит через край трубки, а с другой трубки соответственно засасывается холодная вода, объём уменьшается и так по кругу...

Hi! I don't know if this can be replicated on a larger scale! Would have to try!

you can't. The thermal efficiency is very low. The heat on a larger scale will have to be extreme for it to work. Even if you manage the heat somehow, the cost of fuel will be prohibitive.

@@arnoldtm31 oh, alright. Thank you for the info.

Hi! The water vapor doesn't get too hot! But if the fire is excessive this can be a problem! I had this problem!

@@MrGamb No if you use the solder that plumbers use 50 or 90, it is easier to weld with the torch.

Obrigado! sou do PR

😁

Yes!

I imagine it would be pretty cool!👍

LQQK up a propane powered Pulse-jet, It is the progression of this idea.

fe

não tenho muitos conhecimentos em fisíca, mas creio que quando a água aquece forma vapor, empurrando um pequeno fluxo pra fora, nesse momento forma - se uma pequena pressão negativa, puxando água para seu interior que vai aquecer gerar pressão positiva! Isso vai se alternado onde o fluxo de expulsão é um pouco maior que o de admissão, o empurrando para frente. Espero ter ajudado!

I don't understand friend!

epoxy glue

There is no machine involved. You can buy a cheap soldering iron for $30 or a better model from Hakko for $75. You need flux and soldering tin and they are fairly cheap to buy.

@@diegosilang4823 I made one out of a pencil once, and it worked surprisingly well

@@MrGamb , heat releases most types of glue. Epoxy might or might not hold during heating from the candle. Thank you for the instructions.

Por el agua y porque el calor no es suficiente, aparte aun sin agua necesitaria un poco de pasta para soldar, intenta soldar sin pasta y veras.

@@rogerlemagnifique7415 gracias por tu aportación, bendiciones

Por estar em contato com a agua

@@carlosalbertodalbem2755 bien gracias y bendiciones

regular spray can

Yes bro because of it is soldering wire it will be melted if used for long time

if the flame is strong it can happen!

pasta de soldadura de estaño

It's cheap and easy to solder, but you can use brass(hard to bend) or aluminum (hard to solder) or steel brake line(too heavy)

Hi! As the friend said, it is the best material to use!

No but copper is soft and pliable and easy to bend you can use other pipe if you can bend itt

You need to use a soldering flux and the correct materials.

¡Hola! ¡lo siento por el retraso en la respuesta! usé el de 6mm

1/4 de pulgada!

@@MrGamb gracias amigo, las latas son de acero verdad ?

Sim! Mas teria que usar algum tipo de cola! O estanho não adere no alumínio!

Ha Ha, @ 0:35 you can see the explosion warning label on the can!!!!!!!

Yeah, I noticed that too.

I used tin!

That is not welding. It is soldering.

@@senatorjosephmccarthy2720 ok.

estaño