This guy sure likes living dangerously with his thumb.

I’m amazed he still has all his fingers.

Too baeutiful. This is the first woodturning video where I was so scared that you might hurt your fingers during the cut. That was scary as hell

Beautiful! I hope all the wood chips get incorporated into something in the future instead of just being scrap.

Another great example on how NOT to operate power tools. But what he creates is amazing.

Please make your beautiful work also practical by hollowing out the inside.

Your pieces are absolutely stunning, and it is clear that it takes incredible artistic vision to do the work you do... However, the amount of wood wastage bothers me; do you ever collect the shavings and cast them in epoxy to make more pieces?

I think the finished product is absolutely amazing! Just it in its self is a complete work of art. I believe it is so beautiful and unique that it should have a name. Thank you for sharing your artistry!

Seeing the glue lines in the main body kind of blows it for me ...

Such a lot of work, but oh, such a great result!

Pretty but not hollow!

At secondary school in the mid 1960's my friend clued several pieces of different woods together and turned out a beautiful bowl. Either by luck of fluke it was sensational and the talk of the school for a while.

ماشاء الله تبارك الرحمن تسلم ايدك عمل فني جميل تحياتي لك من فلسطين

Sooooo beautiful...

Stunning piece of wood art.

Thank you for sharing your amazing work. True artistry!

I've seen enough wood turning videos not to be dubious about the "raw" material. But I definitely had to see what this frankinwood was gonna become.

What is it ? Simply a piece of art, I suppose. Very nicely done. 👍

Beautiful work of Art

the way he cut and planed the timber is against all health and Safety standards! Besides what he doe in that way the end product is superb!

Stunning! Magnificent!

Outstanding!!

thanks you for sharing your amazing work!

What's being done by this artist is really amazing. Something....each of us should notice....we should not lose sight of how large the initial piece was. It was HUGE! Now compare the before and the after pictures of this item. What would have kept the artist from using a smaller initial build to end up with the same basic result. Why should you begin with something so large...when you basically end up carving most of off during turning.

Beautiful piece! Would be nice to see it in a pretty and appropriate place. I think it would be appreciated even more.

This is how all videos should be. Fast motion, no dialogue and no stupid and annoying music.👍

nice job well done I love it wow

Like 👍👍👍

Beautiful work.

The work of highly skilled crafters always looks easy...I feel that I could turn this urn even though I have never used a lathe. I really like your work and admire your skills

Beautiful work but get rid of those gloves. You catch those cotton things on that piece and you’ll lose a couple fingers in an instant.

Looks stunning 👏🏼👏🏼👏🏼

Nice, but what is it? It's not a vase as it can't hold anything. It's not a lamp.

Beautiful work 👍

I loved it, I would do a couple of things differently, but I like what you did with the material at hand, well done.

Absolutely gorgeous.❤

Very nice

Nice!

AWESOME! 👍

what is it? lamp base , vase. so beautiful.

What is it? besides big.

Beautiful as always

Lovely piece of work, thank you for sharing your technique. What sort of glue were you using to affix the slabs at the beginning? Cheers.

Muito bom trabalho parabéns pra vc 🇧🇷

تسلم إيدك حفظكم الله يا فنان

Que ingenio yan maravilloso, una obra hermosa!!!!👏👏👏💖💖💖💖🇦🇷🇦🇷🇦🇷🇦🇷🇦🇷

Nice work 👍

В боковых медальонах хорошо смотрелись бы какие-нибудь миниатюры или портреты.

Another beautiful work of art!! Amazing 👏!!!!

😮nice

Respect.

Anyone else waiting for him to lose a finger😂 lol

well done but, no security in using maschines

Do you sell your products???

Мастер РукоЖоп. Кривые руки не переделать.

Wow!!

Bello veramente

So well done!

When that thing started spinning omg

What's it good for?

Fantastic work!!!

Beautiful work...

Please, what is the red wood ?

All that work & trouble for this ?

Wow istimewa skills good mr

I just have one Obvious question. WHAT is it please???

💖👌💯👍⚘️❤️

watch that thumb or you might not have it anymore

Uma bela utilidade inútil.

What is it though? 🤔 it needs to be hollowed out.

É um trabalho duro mas no final se torna uma obra de arte maravilhosa

Yes but more prettier than not hollow that is so good

What glue are you using?

Roll up the shirt sleeve

A major "No. No." is turning with gloves. A long-sleeved shirt isn't wise. One little mistake and he's in the ER. Whether intentional or not he needs to post a warning pointing out gloves aren't recommended. Otherwise a very nice video.

This is my first video of yours. Do you have any of just your lathe ????? I looked through your channel and didn't find anything. Did you build it?

What is it?

You took way too much off of the bottom. I would only trust putting 1 flower in that vase. Sorry, just my opinion.

7:03 wtf?

😀😊😅😅

That much work without surfacing the blocks before gluing makes my body hurt to watch!😟😟😭😢😥😥😥😰

Would you PLEASE get rid of the long sleeves while you're working around the machines.... you scare me.

Lindo

Слабо вазу порожньою зробити??? ХАЛТУРА!!! - Старий -

Intro way too long.

If you learned to use correct tools you wouldn't have to use a grinder to smooth it out.

Nuostabus darbas 👍👍👍 Linkėjimai iš Lietuvos 🇱🇹 🥂☕☕🥧🥧

Nein

УЖАС!!!!!Полное Г....!!!!!!

Well named - Woodturning Crazy. A waste of wood here, far too much turned away to dust. Poor glue-up, lines showing and inaccurate centring giving side panels of different sizes. Should have been hollowed, the glue joint at the base would have been ideal for this. All in all, a poorly thought out and poorly executed attempt, although the overall shape is pleasing. I haven't mentioned the use of gloves yet, maybe I'd better stop there.

Wonder how many “craftsmen” in that factory are missing digits or have serious injuries from their poor safety protocols? Use a push block, take the gloves off, and get your thumb away from the large spinning mass…not a huge deal…makes me itch…laughing though how people pay thousands for high- end tools and are matched by guys using sharpened metal rods…

Wasted use of what looks to be Mahogany, the brushed-on finish and an accordion !.................................

Please clean your nails a little bit better next time.

# 1. Wood must be very cheap where ever you are! # 2. You keep playing fast and lose with the lathe & tools and they will be calling you nubby pretty soon! I guess it's good art but just not very practical! 🤔 I'll pass! 😐

Meh! 😮‍💨 Jk! 😅

😮😮😮😱😱🦘🇦🇺🐨

Crude and unimpressive.

Your glue joints are of poor quality and very distracting.

It's too tedious watching you cut, plane and glue each piece of wood in this video. In the future meby you could just show one and then maybe the glue up then the trimming, turning and finishing of your project.

Без шаблона, "на глаз" - охренеть... Сколько же надо учиться, переводить материалы, чтобы такое мастерство наработать?