#RepairGearbox #TruckGearboxRepairing Thanks for watching Love you 😘
Пікірлер: 398
@zippy3503 жыл бұрын
Should get another 50 miles out of that now
@raider31643 жыл бұрын
Admire this . Especially the young men working there. Just boys and learning how to Rip apart and assemble it back together. 99%of western kids are playing fortnite or something useless.
@m.n.sharif53063 жыл бұрын
Exactly.. Actually when you go to Pakistan or India.. Your seeing the work ethic as it was in Britain in the past, victorian and pre victorian times through neccesity.. Its like stepping back in time.
@mudhead84153 жыл бұрын
Hard times bring strong men, strong men bring good times, good times bring weak men, weak men bring hard times... Unknown
@dm553 жыл бұрын
Sort of what you did when you were a kid.
@davidelliott58433 жыл бұрын
@@dm55 We had a moped but didn’t have the pulling tools to get the engine apart. Then brother gave it to a friend who trashed it within a week.
@justaguynamedme83373 жыл бұрын
I thought I was the only one who felt like that!!!
@chrisparker49403 жыл бұрын
They remind me of Jawas on Star Wars. That was the transport they were working on. They need an R2 unit.
@davesstuff15993 жыл бұрын
Huge respect for these guys.
@Kingdom-Republic2 жыл бұрын
In my in county we would just replace the entire engine because it would be be cheaper than the labor. And one more thing I didn't see not one power tools. So much respect for these guys. Would love to visit that shop one day.
@kurdbaloch11982 жыл бұрын
You are from Kenya 🤣
@moviessummarized48033 жыл бұрын
Imagine disassembling, all components later on having trouble to remember exactly the position of each part
@masautomx21313 жыл бұрын
I don't think that is the first gear box they work on. Maybe is the grar box number 360 they work
@davids84493 жыл бұрын
Playback the recording in reverse Mr Holmes
@jasholabaiskelijasholabais65553 жыл бұрын
Then you're not a certified mechanic
@sampsonsunny62982 жыл бұрын
5.39 that's the best scene of the crime, you even hear sirens from the factory cops, no just putting shit. Great job, broken synchro, come and chipped tooth on gear.
@Helifella8823 жыл бұрын
Not a torque wrench in sight. Three white knuckles all the way. Great to see these industrious boys and men working so hard. If they had all the proper kit good tools a press and a clean workshop they would leave us in the West standing. The world is unfair but they look happy and have a sense of purpose. Good job 👏
@belatoth37633 жыл бұрын
it would be more entertaining seeing the face of the factory designer engineer in a small window watching this :D
@simeonrogers59153 жыл бұрын
😂😂
@cyrilsimon99493 жыл бұрын
The reassembly of the many parts of the gear must be done properly, any missing screws or even the sizes of the screw does matter, using different sizes of screw or mismatch screw, as well as mismatch parts can damage the gearbox.
@simeonrogers59153 жыл бұрын
It won’t take long for it to park again with that reused gear that’s broken. .
@johanruiter58483 жыл бұрын
These men know their trade. Nice to watch👍👍👍
@theblackmambaplague2 жыл бұрын
Fantastic! It’s soothing just seeing gears and clips being taken apart and back together!
@danielmiller44923 жыл бұрын
Atleast they have their safety sandals on. Lol
@raylarkin50043 жыл бұрын
And the work rated Ben Davis pajamas 🤣🤣
@nikola23gr3 жыл бұрын
And than their life is miserable. And they ask himself why they can't have better life,economy,standard of living. I can't see nothing good in the video! Sad to watch! But in their hands they as proud!
@djburland3 жыл бұрын
Great work in a very limited workshop. I worked in heavy engineering so know what is involved 👍
@greg00633 жыл бұрын
Great work and much respect. I just feel bad for the kids washing the parts in what's probably solvent with their bare hands.
@kadasenouci33452 жыл бұрын
In old dags Europe, many bricklayers or Carpenters began education as a kid
@josedieguez87542 жыл бұрын
That’s right ! Remember ( contact with skin muy be harmful ) . Very sad
@Freedom4PalestineEndZioNazism2 жыл бұрын
Immense respect to these men and boys. As much as I am impressed, am more repulsed. The little boys are forced due to sheer poverty. Would any of us dream of letting our kids put their tender hands in dirty oil and solvents as well as lifting sharp, hard metal, all day, wearing flipflops? Accidents are inevitable. This is the evil of poverty paired with untold genius and hope.
@peteacher522 жыл бұрын
These men provide the full service and actually do the work asked for, and do it well. Too many western garages try billing the customer for work and parts not provided, hoping the customer will swallow the lies.
@bryonensminger74623 жыл бұрын
Looks like one hell of a shade tree 🌳shop but these guys that work here are a talented well oiled machine
@SWATT1013 жыл бұрын
I'd have a bucket of "spare" parts left over lol
@dustyroads58113 жыл бұрын
God smashing that gear cluster on the ground had me cringing not good
@zaraak323i3 жыл бұрын
I initially thought the same thing, but he's smashing it on a block of wood. Notice the imprints every time he lifts it up.
@MaloneMantooth3 жыл бұрын
@@zaraak323i: That don't even matter Lol. The shaft all those gears are on is now Trashed.
@Hamchunk19683 жыл бұрын
I was thinking, I'm not surprised there are strange noises coming from the gearbox after pounding the gearset like that. 🙂
@billhanson49213 жыл бұрын
@@Hamchunk1968 pakistani mechanics...... say no more
@tomsaywer98833 жыл бұрын
It ain’t your whip, stop crying.
@mini_special3 жыл бұрын
Breaking that gearbox as you would break a coconut!
@zgabeartzaiftodie86153 жыл бұрын
We are all human beings, religion and culture do not matter. I admire and love all the good people on earth.You always have interesting videos
@raylarkin50043 жыл бұрын
What does that have to do with repairing a transmission on a dirt floor?
@eusuntaici3 жыл бұрын
Did you find the problem? First I thought you were scrapping it, but then I was really impressed when you put it back together (not so impressed by the way you took it apart, but hey, I understand you had to make do with basic tools). I hope it's working better now and all your effort was not in vain.
@romelmannalon2682 жыл бұрын
Good job young boys, master your skills and it will benefit you until your next generation
@xoxrayxox42473 жыл бұрын
Why dont use a rubber hammer to take apart?The metal screw driver may damage the surface then will leak.
@edwardmyers17463 жыл бұрын
Theres always reliefs in the castings for the soul purpose of prying them apart via screwdriver
@dm553 жыл бұрын
buy them a rubber hammer. you make do with what you have.
@DigitalYojimbo3 жыл бұрын
Leaking is a different form of working.
@joegutierrez26593 жыл бұрын
I have all the tools in the world and can't do half the crap these guys do with only a few hand tools, I got a headache watching this but props to these gentlemen!
@danielsatko-3 жыл бұрын
by the color of sealing paste i knew that this transmission was serviced last by them
@playsportfun33563 жыл бұрын
The way they service it. It's a weekly customer.
@solidgoldeazyaction3 жыл бұрын
thats a very common sealing paste
@andrewdegozaru743 жыл бұрын
The sped up voices sound uncannily like the characters in the Nintendo Game Animal Crossing (new horizons) - enough so that my daughter paused her game to see if I had installed the game on my phone. Seriously impressive mechanical skills with surprisingly simple tools.
@prawny120092 жыл бұрын
I sometimes struggle to remember where all the pieces go working alone. How these guys remember where everything goes with a dozen people working all at once is crazy.
@philt17713 жыл бұрын
I'm no mechanic so I think they're amazing. It looks like total chaos but I'm sure they get the job done having done these repairs hundreds of times over! I'm so inspired by these guys I thing I'll change the oil in my car.
@Scruples12 жыл бұрын
I watch these in amazement and the low wage this workers are paid. It also is my amazement that how many haters are here. Good thing is, there are many more positive people in this world...still.
@Qwerty12359452 жыл бұрын
Brilliant work guys.
@redlabel39773 жыл бұрын
Fast chatter ,hilarious 💪🏽
@JohnS-il1dr3 жыл бұрын
Those kids washing with no protective gear is just sad to see. In ten years their health will suffer from all those chemicals
@gtrdrejugfde2883 жыл бұрын
Just hard working men. Mush respect
@terencebennison62752 жыл бұрын
Even if I had the necessary skills to take that engine/ gearbox apart, my back couldn't take all that bending and crouching!
@dgb58203 жыл бұрын
This is pure team work but how they don’t loose nuts and bolts has got me
@quranmoon88943 жыл бұрын
Yea you are rite. As i had experience , master always order one guy to keep all nut bolt locks , pins slides in one box , if anything lost then will get punishment
@patrickwatters75553 жыл бұрын
I used to do mechanics like this, then I would pick up all the bits and throw them in the bin. Job done.
@jrwaters313 жыл бұрын
Not a Tork Wrench or a set of Feeler Guages in sight, brilliant.
@lulutileguy3 жыл бұрын
good thing keep young lads busy real busy
@playsportfun33563 жыл бұрын
We'll show you boys how to get his money and leave him stranded 50 miles away
@petergreen53372 жыл бұрын
Impressive. Praise indeed.
@mqb51513 жыл бұрын
I loved it when they smashed it against the wooden block...lol. I wonder if they do that same method in garages in the UK
@DavidVanHelden13 жыл бұрын
Would not have believed it if I hadn't seen it ......
@BFPolarBear3 жыл бұрын
Speeding up the voices makes them sound like the little guys from star wars
@oldasdihrt59932 жыл бұрын
I never noticed that anyone looked at a manual either. Amazing
@mikewinkelman70153 жыл бұрын
These kids dont have time to get into trouble. Teach them when their young.
@144Donn3 жыл бұрын
And NO screws or washers left on the bench at the end! Everything put back according to spec..Quite amazing!
@mikedevaney99013 жыл бұрын
What a crew. Great video !
@mikec8863 жыл бұрын
Definitely a 3 day job
@copthis59783 жыл бұрын
Gee loved the chipmunk commentary sounded much better clear as mud 🛠🔨🔧🛠
@simonlunt3533 жыл бұрын
The kids take it apart and know what they are doing and then the men put it back together again with the kids helping out all with out a Manual incredible these chaps no what they are doing 👏👏👏👏👍
@oscarzamora29112 жыл бұрын
No conocen los extractores, todo a golpe de martillo o contra cualquier superficie dura. Lo asombroso es que después funciona.
@getcreative013 жыл бұрын
These guys are the surgeons at the hospital too. 😆
@josefibanez41882 жыл бұрын
Excelente trabajo 👍
@LDbcdAL3 жыл бұрын
Amazing! This is real team work !👍👍👍
@raylarkin50043 жыл бұрын
Working on the floor in the dirt wearing pajamas and slippers says it all
@Falconurbex2 жыл бұрын
well done mate i would have to keep all those bits in imdividual pile and take pictures so i know where everything goes,, has i would not habe a clue how to put it all back together, without pictures and keeping the individual parts along with ther nuys and bolts being kept together in seperate piles lol.
@masautomx21313 жыл бұрын
Great job
@sampsonsunny62982 жыл бұрын
Reminds me of my workplace currently, you don't have to go to Pakistan to see rough workers, working in shit conditions.
@peterpunch81363 жыл бұрын
Very clever..!
@georgeforall3 жыл бұрын
This reminds me. I need to get my transmission fluid changed.
@albyboy42782 жыл бұрын
Hitting the bearings with a hammer is not the best, after a certain amount of time they will vibrate and make noises then they will break, to put the bearings in their place you need collars. A little advice, when you put the bearings of the gears to the assembly always put the oil do not let them run dry with your hands because they get scratched with damage that over time the gearbox breaks. For the rest, great job.
@rcdogmanduh44403 жыл бұрын
Love the kids right in the thick of it, learning and having fun! Great to comment on how it's done or should be done but I'm not there so it's moot for my two cents!
@geraldcharles16243 жыл бұрын
Did the best they could with limited resources. A kid in the U.S. would just go steal another truck.
@dm553 жыл бұрын
Such as positive comment.
@eugenecod3 жыл бұрын
can't steal a truck anymore in USA they're anti thief protected... plus cctv is above/around your head
@geraldcharles16243 жыл бұрын
@@eugenecod 875,000 vehicles stolen in the U.S. last year. I guess no one told the thieves it wasn't possible
@renopereira14343 жыл бұрын
Great skills 👍😲
@jameschaves39363 жыл бұрын
Needs a new main shaft, most likely a countershaft aswell. Had that happen on my nv4500 after pilot bearing failed
@waheed4182 жыл бұрын
All I can say is great
@yvonfem3 жыл бұрын
Wow hats off to those kids must be really intelligent and no power tools
@abdelkhan29442 жыл бұрын
Some mechanic in America, haven't in there entire life done this kind of work.The most they would tell you is replace the entire Gear box which is cheaper for them.
@CR-lz5yx3 жыл бұрын
Awesome guys👍👍👍
@Steve.1913 жыл бұрын
Imagine the potential with impacts
@DinkyDoughnut3 жыл бұрын
For all the biased comment, I assume this is a common transmission and the disassembly process is second nature. Where time is a also money the team set about their individual tasks until the Reassembler reinstates usable parts to the main carrier and drive. I can also do similar processes on the dated Cassette Tape Drive Mechanisms as many have to be repaired due to Manufactures halted production over a decade ago.
@nathanbond81653 жыл бұрын
The other things that people forget is that it wasn't the boys assembling the transmission they were just the disassembler and cleaners this is skilled technicians older skilled mechanics are the ones that actually reassemble the transmission as with most heavy equipment shops they probably have a fleet contract and they service this particular transmission that's probably in all of their trucks they probably disassemble and reassemble thousands of these in a year they probably know each part by just touch and could probably assemble one of these blindfolded that's the part of the video that people Miss it's obvious to me the level of confidence and how they knew exactly where everything went that they are highly skilled mechanics the only difference between them and your average Kenworth shop is that they're using hand tools and if you go to a fleet shop or dealer like Kenworth their mechanics have fancy air tools and all kinds of calibrated equipment from the manufacturer at the end of the day commercial manual transmissions are some of the most heavy-duty pieces of equipment ever made and and I admit to the Layman them slamming the gear assembly against a block looks brutish and like it's going to break it but for God's sake these gears are made of T1 Steel you're not going to break anything by merely hitting it against a concrete block now if you treated an automatic transmission in a car that way yeah you would f up a lot of parts but this is a heavy duty semi tractor-trailer transmission manual gearbox transmission that uses T1 steel carbon hardened steel parts in Gears you're not hurting anything by hitting it against a piece of metal
@Falconurbex2 жыл бұрын
great job guys, only thing that concerns me is u put 2 chipped shafts back on so surley its gonna still make a noise and eventualy make a grinding noise again and eventualy fail due to briken splines on the 2 shafts... other than that well done..
@sure52913 жыл бұрын
Oh my god, lot of children are working . Ain't they got to school.
@seikoandora64853 жыл бұрын
Summer time no school no technology neither video game.
@nogoodhood2023 жыл бұрын
Shop class
@JoelDmello7223 жыл бұрын
Child labour.
@piperdoug4283 жыл бұрын
Better education than some state brainwashing factory
@muller-luderiz93723 жыл бұрын
@@piperdoug428 👌👍
@joed37863 жыл бұрын
Oh,...! So That's eerh..? How...? To do that? Nice Gloves! Where was the Transmission Fluid and the Cleaners Dumped?
@inaciosilva89573 жыл бұрын
Muito bom o vídeo, ficaria muito melhor se mostrassem, quais peças estavam estragadas e foram substituídas....
@TavosMr3 жыл бұрын
Amazing work 👍
@RelaxingMusic7.3 жыл бұрын
بیا کانالم ویدیو جزاب ببین💛💛💛
@josedieguez87542 жыл бұрын
I watch this videos in silent ! Yet so many things go through mi mind. For example ( contac with skin may be harmful) That is just one . I imagine there bad backs on later years . Mi being a mechanic. I feel more sad for the conditions around them.
@vb50373 жыл бұрын
Выглядит со стороны чувак шёл по улице, увидел трансмиссию разбирают, открутил пару болтов, пошёл дальше.
@RelaxingMusic7.3 жыл бұрын
بیا کانالم ویدیو جزاب ببین💜💜💚💚
@nachocroes80753 жыл бұрын
You guys are ginios God bless you all and famely.
@hearsayhenderson26233 жыл бұрын
Very impressive
@ningishziddashar34802 жыл бұрын
Truck owner. "I just came in for an oil change"
@ernestberry-songsrestored56373 жыл бұрын
This is why my wife says I’m half Indian 😂... love these guys
@kurdbaloch11982 жыл бұрын
This is not endia and endia mother fuker cuntrry 👞🇮🇳
@firebladex85863 жыл бұрын
The techniques are brutal. Do it properly with the right equipment
@steveb7963 жыл бұрын
5 mechanics at 50 cents an hour. This is gonna cost ya.
@graylingdrummond94213 жыл бұрын
That was incredible, no power tools, no speed ratchets just basic hand tools, this is what kids need to be part of to learn.
@syan90173 жыл бұрын
Five gives on a gear box, what more do you want?
@graylingdrummond94213 жыл бұрын
@@syan9017 gives, what the hell you talking about???
@chrisparker49403 жыл бұрын
Hey boss we got’t back together and have 3 bolts and a snap ring left over
@pgb19133 жыл бұрын
Taking it apart is the easy part. Let's see them try to put it together and see if it runs.
@saylormalan3 жыл бұрын
I was very badly impressed by the clumsy way this box with so many pieces was dismantled. Looks like it's junk going to waste. I wouldn't do it that way. I would disassemble calmly and carefully and would take pictures, make drawings and schematics, and mark all the pieces so I don't assemble wrongly or forget pieces on the outside. In my mind such a service has to be done with calm and whim, but... each one works in their own way.
@autodidact71273 жыл бұрын
This is a manual trans. This person is an expert. They don't have money to be wasting time making schematics for things they understand fully. You're discounting their experience. The key here is being frugal with the resources they have and getting the job done. The economics of their life don't support replacing everything. Working with inadequate tools and still getting the job done is commendable. They're doing good work.
@nathanbond81653 жыл бұрын
I think one thing that you're missing is you'll notice that when they reassemble the transmission it was not the boys doing it it was much older skilled mechanics this is obviously a fleet truck and they probably disassemble and rebuild those Transmissions hundreds of times a month they know every part by touch and exactly where each part goes if you've ever worked on fleet vehicles you get to know intimately every single part of the vehicle where it goes and you could put it together in your sleep basically
@biula32783 жыл бұрын
You are not in the middle of nowhere with just a fistful of old tools to deal with... this is Third World high skill and mastership, they are the best they can afford. And, with our westerners' shame, they do it perfectly well. Great people!
@rudybarraza63393 жыл бұрын
These kids are awesome learning a gr8 skill...Trans techs here in the states make gr8 money.!
@frankkatsenis38123 жыл бұрын
At 9.25 the fork goes on that gear(the one that helps shift without clutch) forgot the name is it not broken could they not get another one or was this emergency repair?
@WBT7143 жыл бұрын
Great job 👍👍👍👍
@majordanggle3 жыл бұрын
We will never know if they actually fixed the transmission!
@simeonrogers59153 жыл бұрын
All they did was clean out the debris of the broken gear and reused the broken gear. So I guess it’s not fixed. Just a waste of time. .
@jaimesantiago17513 жыл бұрын
They found the problem.They order part and wait a year to get it.Mean while they have to hear the noise that the broken part makes ☠️
@majordanggle3 жыл бұрын
@@jaimesantiago1751 that’s crazy.
@jaimesantiago17513 жыл бұрын
@@majordanggle 😂😂
@raulserna98713 жыл бұрын
So the noise was a wristwatch was left behind during previous reassembly
@bartoloarias72433 жыл бұрын
Very good
@blarfneggs37283 жыл бұрын
Jamming a screwdriverer between the mating surfaces not so good but A for effort
@solidgoldeazyaction3 жыл бұрын
they don't have an impact wrench? but their teamwork makes up for it though.
@brogolchannel42782 жыл бұрын
Bermanfaat sekali...
@fivetengarage28673 жыл бұрын
Seems legit.
@m101ist3 жыл бұрын
They need a press, I think ! 😳
@chrisyboy6663 жыл бұрын
That’s right grip on the journals in a vice with no protection…yeah they get the job done but I wouldn’t want then near any my plant…