Rob gives his review of the $160 Transmission Floor Jack purchased from Amazon.
Пікірлер: 3
@jma8352 Жыл бұрын
thanks, i got one clone of it but it dont go high enough for the pit so im fixin to weld 2 plates to a 3" pipe 32"s have a blessed new year!
@scottr.93162 жыл бұрын
Hey man, great video. I have the same jack, in order to bleed the air from it...without a load, dont use the handle, and just grab the part on the jack that the handle goes into to pump, with the valve closed, lift the jack to about halfway up, then take a small flat head screwdriver and slip it under the outside lip of the oil fill plug and push in gently, you'll hear a bunch of air hiss out. Do this a few times and it'll flush all the air from it, and also cause it to pump a bit faster. I only use my handle to make small adjustments when i have a load on it up high, but to get whatever it is thats on there up to height, i just grab the pump on the side of the cylinder and pump it quicker than i can with the handle on it.
@youtubemechanic2 жыл бұрын
Thanks so much for the tip. I actually relocated to a different garage with a better tire changer but if I ever come across one of them again at least I'll know now. I really appreciate you tuning in thanks so much.