Amazon LCG build part 1

Рет қаралды 4,033

7 ай бұрын

Starting the new LCG build with the layout of parts collected from Amazon and Aliexpress.
Links below to all parts used.
LCG chassis kit
amzn.to/41azl7G
Hobbywing fusion 1200kv motor
amzn.to/3tclrW9
high clearance links
amzn.to/3sTVkDz
Traxxas 2660 shocks
amzn.to/3Ra0TFH
Traxxas shock caps
amzn.to/47IcpiH
Losi Mini-T springs
amzn.to/47FO5hj
Truck body
amzn.to/3uKvuSP
Axle mount servo bracket
amzn.to/3RsTQtc
Aliexpress Capra axles plastic F9
www.aliexpress.us/item/325680...
** remember, the Amazon links provided are affiliate links which help support the channel with a small commission on your purchase
at no additional cost to you, thanks so much for using them. **

Пікірлер: 34

@ZeeksRC 2 ай бұрын

Looking like a sweet build. Can't wait for part 2!

@leesrcs 2 ай бұрын

thanks so much, still making a lot of set up changes to find the right combo but its getting there.

@kloudkreeper 4 ай бұрын

I just assembled the same kit. There was a lot of slop at the link mounts on mine as well. I bought a cheap bag of silicone "O" rings to put between the link balls and mount points on the axles as well as frame mounts locations. Snugged them right up without restricting movement. Only on one side of each ball link though. Works great. Love all your builds and videos 👍 Keep up the great work!

@leesrcs 4 ай бұрын

Cool idea, I will have to give that a try. 👍🏻

@rc.terminator 7 ай бұрын

Awesome brother looking good can’t wait to test both of are builds out

@leesrcs 7 ай бұрын

yep, follow the leader on lines

@morepower-4.6 6 ай бұрын

I built the same chassis last year, came out pretty good!

@leesrcs 6 ай бұрын

Yes, it was a good deal for the price, some things I like, some things I prefer the Injora chassis, But Ive had the Injora chassis a while and have worked out a lot of its issues. This one will be the same, just time and testing.

@user-dh8hc7st1d 7 ай бұрын

Following. Nice video and I am planning a similar build. I would love to see more of your build as it progresses!

@leesrcs 7 ай бұрын

thanks for following along

@g.bjumpsbashing3062 6 ай бұрын

perfect job mate...keep going🤩

@leesrcs 6 ай бұрын

Thank you so much 😀

@littleslim3756 5 ай бұрын

Nice man. You just got a sub

@leesrcs 5 ай бұрын

thanks my friend !

@shermaddictedtorc8540 7 ай бұрын

all your parts are great only difference from my build is the motor I went 1800 and that was because I was told the 1200kv motor was better on a straight axle and the 1800 worked better on portals time will tell I have both could be bs.but old mate has steered me straight so far has to do with torque curve from motors and gear ratios in diff and portals

@leesrcs 7 ай бұрын

yes we will see, I can always throw the 1200 in the injora crawler and order an 1800 if I need to

@keldonator 4 ай бұрын

I'd be curious if it would be worth adding a carrier bearing in the back there and bending the links up more for clearance. Looks like you could gain almost an inch or so more clearance

@leesrcs 4 ай бұрын

I haven't had any issues since I have clearance with the portals

@keldonator 4 ай бұрын

@@leesrcs Yea it doesn't need it, these seem to perform well. I should have said breakover not clearance. Might be able to get over sharper points with a carrier bearing setup but it would also add a bit of weight up higher.

@jameswisecarver Ай бұрын

Can you turn the motor and transmission the other way? Be better for weight distribution

@leesrcs Ай бұрын

yes, you can run it either way, just depends on the length of your motor and if it clears your front links.

@amie704 6 ай бұрын

Sorry if it was said in the video what sliders are you using in this build? Thanks in advanced I subscribed!

@leesrcs 6 ай бұрын

Thanks so much for subscribing, it means a lot ! Im just using the short aluminum side plates that came with the kit, not really sliders, you can see what comes in the kit in this video when I introduced the build. But I may be changing out to a delrin skid and sliders soon. kzfaq.info/get/bejne/p7GHqsZip8-1hKc.htmlsi=chzm1jY_gBmG01ri

@amie704 6 ай бұрын

@@leesrcs Thanks so much!!!

@1BARBAS 5 ай бұрын

Nice build can you tell if the links 324 or 313 work?or doxwe need smaller

@leesrcs 5 ай бұрын

LCG's work better with the short front and longer rear links. But yes you can use stock links, it will just change your balance.

@1BARBAS 5 ай бұрын

@@leesrcs so many tks i have a carbon chassis 10.2 thinking in migration

@bobbyspenser7304 2 ай бұрын

Hey can you flip the trans around were the motor would be in the forward facing way

@leesrcs 2 ай бұрын

yes, you can run it either way you want.

@bobbyspenser7304 2 ай бұрын

@@leesrcs thank you I am wanting to build my first rig an I am just wanting to build something that climbs like a spider I am thinking about a pork belly 12 degrees chassis have you seen the chassis I am talking about thank you I am in this nursing home I got hurt about 4 years ago and I am in a wheelchair now an I have been saving up parts to build me a rig an I have everything but a chassis an links it's been 2 years getting what stuff I have got because I am not able to work anymore so thank you again