2011-2020 Challenger 5.7L K&N Series 63 AirCharger Cold Air Intake Review & Install

Рет қаралды 14,085

Күн бұрын

Level-up the performance of your 5.7L HEML Challenger with a K&N Series 63 AirCharger Cold Air Intake. This cold air intake features a free-flowing design that works with the included air filter to direct loads of cold air into your engine. This boost of cold air maximizes fuel combustion which in turn increases overall performance. This extra power ensures there’s no situation you couldn’t get out of, whether on the road or the track.
K&N engineered their Series 63 AirCharger Cold Air Intake to improve the performance of your HEMI Challenger without the need of reprogramming your computer. By utilizing flow dynamics, this Intake will increase power using the original factory tune. Even though a re-tune is not required for operation, AmericanMuscle recommends a custom tune to reprogram the vehicles computer (ECU) to get the best possible performance from this Cold Air Intake. muscle.am/31tUIU8
Shop this K&N Series 63 Cold Air Intake: muscle.am/31tUIU8
Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf
Item CH3389
----------------------------------------------------------------
Follow American Muscle for all the latest Challenger Content:
Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf
Instagram: / americanmusclechallenger
FaceBook: / americanmusclechallenger
AmericanMuscle.com has the best aftermarket parts for your Dodge Challenger: muscle.am/2ztDN5R

Пікірлер: 30

@AmericanMuscleDodge 3 жыл бұрын

Shop this K&N Series 63 Cold Air Intake: muscle.am/31tUIU8 Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf

@brianhurd97 2 жыл бұрын

Do yall have one on the dodge durango rt

@gearhead4005 2 жыл бұрын

very helpful vid, thanks👍

@AmericanMuscleDodge 2 жыл бұрын

Thanks for watching! -Zach

@mikehooper8199 6 ай бұрын

I have a 2022 RT and the bottom part of the box is hitting a fixed AC line. Will not line up correctly to bolt in. Says it fits a 2022 Hemi. The 2 flex lines referenced in the video by the radiator can moved over but not that other line.

@kenbartlett8355 Жыл бұрын

what are the options if I have a challenger with a shaker hood?

@brandonelieff1158 Ай бұрын

It needs oil catch can and half valve covers. Can you tell the difference with the shock bracket

@jnstrcklnd 5 ай бұрын

Why didnt you put the clamp around the intake support bracket?

@makantahi3731 Жыл бұрын

10:27 my filter started to shrink and i had problem to fit filter adapter into filter so i had to grind rubber of filter to make it bigger to fit adapter

@davidbugel3850 3 жыл бұрын

You should do this but for the 3.6L v6 engine

@AmericanMuscleDodge 3 жыл бұрын

We will as soon as we get more access to V6 model Challengers! We only have a 5.7L right now so that limits the amount of V6 products we can review. -Zach

@ewconway 2 жыл бұрын

Is this exact K&N cold air intake CARB certified for California?

@AmericanMuscleDodge 2 жыл бұрын

At this time, this cold air intake is now CARB certified. -Zach

@bennyylopezz Жыл бұрын

Do u have yo disconnect the e battery so it won't give u any indicator at the dash?

@makantahi3731 Жыл бұрын

are you joking

@Rodnisity 2 жыл бұрын

My hood is hitting the heat shield when I close my hood. How do I correct this?

@makantahi3731 Жыл бұрын

return to stock filter housing and install kn panel filter and you will have more cold air intake than with kn

@hypedmonkey1134 Жыл бұрын

Is was the weather stripping right ?

@malyck 2 жыл бұрын

Would I be able to fit this on my 09 chargerR/T ? I'm not sure what the difference between the 09 and 11 charger/challengers are.

@alexgustavorodriguezalvara9564 2 жыл бұрын

Do i need to disconnect the battery to install it?

@hypedmonkey1134 Жыл бұрын

@bennyylopezz Жыл бұрын

This fit a 5.7 2021 RT charger ?

@elstaywinning5735 Жыл бұрын

It does. It's a bit of a weird fit but it fits as long as you have all the tools

@hypedmonkey1134 Жыл бұрын

Dose not fit with any shaker hoods

@makantahi3731 Жыл бұрын

why people calls that filter cold air intake when it takes HOT air from engine bay

@MegaMontano1 11 ай бұрын

It doesn’t though with the weather strip

@Tony_M392 Жыл бұрын

Where’s the 6.4 intake?

@AmericanMuscleDodge Жыл бұрын

Right here! -Zach www.americanmuscle.com/k-n-series-63-aircharger-cold-airtake-1118-64l-w-o-shaker-hoods.html

@Tony_M392 Жыл бұрын

@@AmericanMuscleDodge ok nice, no video though?

@pxcysoccer8681 4 ай бұрын

🫡