Shop These Eibach Pro Kit Lowering Springs: muscle.am/2STrFXA Subscribe for Daily Challenger Videos: muscle.am/2TXrfwf

Finally American Muscle gave us our own channel. Screw Mustang! Challenger forever! Subscribed.

Just installed on my 19 Mopar Challenger Scat. Perfect drop for wheel setup. Front 20x9 275/40/20. Rear 20x11 305/35/40 . Looks amazing and rides better than stock. I have kooks long tube headers, still have about 5-6 fingers between headers and pavement. Clean stance.

Just got my Pro_Kit springs put on yesterday. Def like the look....just snugs up the gap between wheel and fender without tire rub. Basically by my eye, it just removes the factory rake a bit. I got a measurement of 28.625 inches from concrete to fender on the front and 29.5 inches from concrete to fender. I can get basically 1 finger between wheel and fender...perfect for my daily driver Scat pack. Was driving around Chicago downtown this morning...hit a couple rough roads....handles the bumps the same as OEM springs. Eager to try some faster cornering, braking etc. Def quality spring product for $$$ spent. $540 for install and alignment.

I considered springs but went with kw v1 coil overs. I dont like the fact you get one set height with springs and after the springs settle it’ll drop more. I like adjustability. I did consider these springs though. Good video

If you get just the springs you will get some negative camber & launching is harder off the line... Weight transfer

On the hellcat does the srt mode suspension settings still work?

Just ordered mine waiting till monday

What is *that* on the front of the car? Dodge musclecars are designed to have a rake to their stance, and the springs aren't supposed to look like they are bending and trying to jump out of the spring perches.

Was this challenger previously lowered or sitting on different shocks and struts? This challenger seems relatively low for such a light drop.....

About to install these springs. Does anyone have the complete list of torque specs for the bolts and nuts?

I removed my springs free hand. The top hat shot off like cannon ball but overall it wasn’t to bad !

The front bumper mask looks good with the purple paint.

Any news if there are any problems with adaptive dampers? My 2020 scat pack is coming in 8 weeks and the gaps over the tires are enormous. Greetings from Germany

I like the tutorial, would have been nice to see the use of a compression tool for us regular garage folks.

Just Installed them on my 2021 Scatpack Widebody, no rub with full turning, plan on getting 315/50/17 beadlocks in the back soon will update if i have to adjust anything.

How long were you hitting that upper control arm bolt for? I noticed the cut scene. I got stuck on this part when trying to do my install.

What size tires are on that front and rear? I'm looking at installing the prokit on a 2016 Hellcat 275/40/20 front-315/35/20 rear, will this work or will I have to roll the fenders? Thanks...

What if the rear springs were installed with the more compressed aide facing down? Pretty much the opposite of how they were installed in the video? Different brand, not Eibach, no lettering to tell which side was up or down. Also, on a Charger, not a Challenger.

22:19 there goes the paint 🤣

I just want to lower the rear of the challenger i already scrape alot in the front and im stock hieght

Will these work on a 2018 Challenger RT?

Saw that pause when you smacked the strut against the fender on the driver side.. haha, good video though.

I have a issue with the passenger rear stiing half inch lower than driver rear. Why? I made sure isolators were in correct position to!

What size are those tires and wheels?

Will these work on the 2014 SRT 300 or just the challenger?

I bought a used challenger with the sportline kit and it drags everywhere

Can the eibach prokit attach on the challenger hellcat redeye?

Anybody have these on your scat challenger for alot of miles? And if so is tire wear even on the front tires? Or is it nessary to get the camber Adjustable upper control arms?

Nice..I went with Complete HR lowering system..

What is the stock suspension height for a 2010 R/T challenger?

how many fingers can you fit both sides with the eibachs pro kit?

Wil these fit a 2020 scatpack says on your website it wont?

The spring was not aligned when he moved it then the video was edited where it miraculously became aligned by it-shelf.

can i get these on a 2015 challenger R/T ?

does this work on the 2020 challenger scatpack?

Can I put this on my sxt challenger?

Will this fit my RT model?

Does this lowering with springs,require endlinks adjustments,front and rear?

I watched his tattoo more than the work detail

Will the pro line work on 2016 challenger scat pack with 315/35/20 rear and 275/40/20 front or would you have to roll your fenders

Just curious, will these work on a 2014?? I dont see how they wouldnt

What size tires are on that car you guys lowered?

Does it fit on regular rt

Do the fat boys go on the front or on the rear

Perfect drop!!

Will the sportline work on a 2016 challenger scat pack

can you guys sell Charger parts too? looking for a good website to order parts from :/

Would these springs work on a V6 by any chance?

I just want to say that if you try this at home, they make it look totally easy and that’s a crock of shit. I’ve been trying for two day to get my rear end back together. It is not easy to Jack the arm back in place and hammer in the bolt, which will undoubtedly fuck up the threads. I’ve literally been trying for two days to Jack it back up and I should have just taken it to a shop. Shame on AM for leading customers to believe this is a more straight forward job than it is.

Would this affect the adjustable suspension in SRT modes

dont you adjustable suspension on the screen though?

Will these fit a 2017 charger scat pack?

Bruh they invented a tube top for the challenger

Will they fit a 16' charger scat?

Will these work with the factory active shocks?

Will these work on a 2017 RT scatpack ?

Can you put these on a challenger 1320?

will these fit a 2021 challenger rt?

What size are the tires in the rear ?

Did he hit the car at 22:20 LMFAOO

🇧🇷🇧🇷🇧🇷🇧🇷👏🏻

I herd this kit will screw up your car

Who decided to drive this car in salt

#noloweredchallengers

@ 22:19 🤔

Well I think this guy is all wrong I think if you lower the car and you put bigger tires on it the only thing that's going to happen is you're going to bottom out more. So I think you should leave the car at the height that it is and quit trying to lower the car if you ain't going to put air shocks on it so you can lower it and raise it then don't lower the springs at all. There's a reason why the car is is put high because it's a tendency to bottom out you people out there that just want to keep lowering cars don't understand that cars or or on the street you just don't understand the the way the world is made and the way streets are. You just want to lower the car cuz you want to look at it. Because it's lower. But you should leave the car at the height that it is because that's where you don't buy them out. So if you want to be dumb like this guy and lower your car because he doesn't work in the Auto industry he doesn't know what he's talking about he's just a model for whoever is trying to sell you the springs andbut the car will bottom out. And there's such a thing as curb hit. You ever tried to park your car and it's lowered like that and you got one of them curb bricks in front of your car and you hit it. Yeah that's what happens.