I'm going to preface this comment by saying that I've been installing screen protectors on my devices since at least 2004, when I got my first Playstation PSP. I've installed a lot of screen protectors on my various devices ever since then (e.g., iPhones, iPads, PSP, Vita, DS, 3DS, etc). I'm not a professional, but I've become pretty experienced doing this! With that disclaimer out of the way, I can say that the video helped, and I had a flawless install on my Nintendo Switch. To help others that may have had issues, I'd like to offer some suggestions: Firstly, try to work in a clean and well lit environment, and make sure to clean your work area, too. Get all the installation items setup and ready to use. You want to work pretty quickly, so having everything ready is very helpful. Secondly, wash your hands thoroughly! You want to remove the oils from your hands. Thirdly, I'm old enough to need reading glasses, and when working on these installations, the extra magnification helps! Use the wet cleaning pad to clean the Switch screen, and then use the dry cleaning cloth to dry the screen. By wearing my reading glasses, I'm able to see the screen very closely. MAKE SURE TO REMOVE EVERY SPECK OF DUST AND FINGERPRINTS FROM THE SCREEN!! If you don't you WILL have bubbles! Lastly, carefully remove the ONE piece of plastic film, per the directions (it's the side that will adhere to the screen). HOLD THE EDGES OF THE SCREEN PROTECTOR! IF YOU TOUCH THE PART THAT ADHERES TO THE SCREEN, YOU WILL LEAVE YOUR FINGERPRINT ON THE BOTTOM OF THE PROTECTOR, AND IT WILL ANNOY YOU TO NO END! Now, while holding the edges of the protector (and/or the tabs on the top plastic film), carefully align the bottom edge of the protector to the Switch screen (it's where the cutouts are for the sensors). Once you align the bottom AND the left & right edges, SLOWLY let the protector drop/slide into place (from bottom to top). The rest of the protector should line up perfectly, and then work out any air bubbles along the side using the card/squeegee that was provided. Remove the final piece of film, and hopefully everything will be perfect. I hope this helps someone out there. Good luck!!

Mine was damaged due to improper application. This company has an iron clad guarantee. Got a new one within 5 days. Thanks

Removing the air bubbles was a very long and scary process but I finally got them 99% out. Looks great

Ours is arriving tomorrow. This video makes me confident in the application process. Thank you TechMatte!

I had no problems apply this product. It was fast and simple. Great quality and couldn't be happier.

thank you, just got one and was scared of making a mistake but this video gives me confidence

I installed mine yesterday after watching this video a couple of times and I'd say I'm 95% happy with it. A few bits of dust managed to get trapped under the protector which is visible when the screen is completely dark but less so when there's something actually on the screen. It only took about 10 minutes to install it and there's zero bubbles. You have to take care when installing it but it's not too tricky. I'd recommend the product for anyone considering it.

im very satisfied with this. is super easy to install, i just put it and by itself start to quit the bubbles, the switch looks clean AF

This video should be included with the instructions. Thanks for the video, I'm gonna go try it again!

Easy install and looks great! I love the look. Great product!

I was terrified, I’ve had horrible experiences with screen protectors. Idk if I just got lucky or what but this went surprisingly smooth. I got one little spec of dust in there but otherwise it’s perfect. Didn’t have any problems with air bubbles, it seemed to settle all on its own. Just did a little pressing along the edges. Definitely going to buy these for other electronics in the future.

Thanks for making this, it's pretty helpful since the box comes with no instructions

I was able to install it myself after watching this video. thanks a lot. results were flawless.....

Great brand, also bought one for my pixel 3a and the result is flawless

I screwed up on two of them and just received two more. Hopefully this video helps me get the next one perfect.

Did mine on a shoebox and it went perfect. I cleaned the screen with the alcohol for a solid minute, and the same with the microfibre, and it came out perfect and bubble free.

thank you so much for this video!

I personally will never choose any other protective tempered glass screen other than amfilm never stop making this tempered glass screen protector as displayed and used in video

Exactly what I was looking for 👍

Looks great.

got mine in perfect thanks

Very Pleased with mine. Install in bathroom after running a hot shower for a couple of minutes. Wash your hands before applying as well. Also, you can't lift up the screen protector without getting a disgusting air bubble permanently on the corner you try to lift, so what I did is I used the hinge stickers as a hinge (pretty much what they're intended for) to swing the screen protector on. Just make sure to push the air bubbles out as your swing it down. Mine came out with 0 dust and my boyfriend's only has 1 spec. it's a pretty great product.

Life saver thanks so mouch

excelente protector de fácil instalación saludos

Applying screen protectors is torture for someone who has shaky hands, like me.

Song is DOPE!

I had a hard time installing these screen protectors. Both corners broke on the two screen protectors. The first one, I tried lifting it up to get rid of air bubbles, the second fell on the floor. Both my fault unfortunately =/ I wish I had seen this video before trying.

Gotta say, all the air bubble comments scared me, but I did it in a very steamy bathroom and there were absolutely 0 bubbles, perfect application. Couldn't be happier! (Really glad I didn't bungle one, need the other for a BDay Present Switch.)

This is an excellent product. First screen protector I've ever applied that came out PERFECT. Just be very careful when placing it down, make sure it's lined up perfectly before anything sticks to the screen. It only took me like 5 seconds to remove 100% of the air bubbles. It looks so good you can't even tell there's a protector there! They even provided a second protector and wipe in case the first messed up, and the lifetime warranty is great, but I won't be using it. I'd like to support this company again. Lifetime fan from me! Thanks for a great product

Thought this was gonna be harder that it was. Got it first try.

I never tried this company before, bought the product off amazon after checking the ratings, great ones by the way. They also sent me an e-mail, something that I've never received from any other company, telling me to contact them if there are any other issues and provided a link with this video in it. Another friend of mine had a problem and they sent him a new one. 100% worth buying from them. Also their product is actually better than many other alternatives. If you want to buy it do so with no worry.

thanks you knowlege

Would it be recommended to reapply it? I sort of messed up when applying it. It's like 1 cm more to the right :(

No matter what I do I always manage to get at least one spec of dust under the screen protector

How long does it have to dry?

Nintendo Switch 'till I die!

Far more difficult than the video makes it appear. On the first attempt, I couldn't get the bubbles out and damaged the corner of the protector trying to remove it to reapply. On the second, the top layer of film came loose as I was trying to position the protector. I tossed it out. May be great as a protector, but at least in my experience it wasn't easy to apply.

I was so close to getting this perfect but a tiny S shape bit of dust managed to get in and I couldn't live with it.

Not the best way but it works

If you have an older Switch it is possible that the screen has warped a bit, in which case you're almost SOL as you'll always end up with an air bubble. Shit sucks.

Any word on how people have managed this with time? How is it holding up? I sent my Switch in for scratches and I bought one of these but I'm concerned with the bubbles. I'm also nervous to remove the protector as the Switches screen is sensitive. Any advice in this regards? Has anyone removed one of these from the Switch yet?

when removing this protector does it leave any damage or scratches to the actual screen?

What about if I don't have a switch opened? theres no dust on it from factory box right? or should I just wipe it anyway

Never fails, every time I put a screen protector on anything, a tiny hair always gets underneath. Bubbles were also a bitch to get out.

Can't get international delivery through Amazon. Any ideas how to get one sent to Australia :)

How is the heat resistance?

does the screen protector get scratched when docking? how has your experience been so far?

Why Micro-Fiber instead Dry Wipes?

Ugggghhh I've got 3 bubbles that wont F off!

Thank you

Can i use this like a tablet ?

Great product, worked great, went on as in video. I never really comment on products unless they offer something for it, meaning a chance to win something - my time is valuable so they should pay in some way for me marketing their product. But this one is worth sharing with your all - great product - highly recommend -- follow above video!!!

I got this brand tempered glass first because it's the most popular, big mistake. It fuckin sucks compared to most other tempered glass I've got for phones and the vita. I ordered the Supershieldz one for Switch after this AmFilm crap failed me and was blown away by how much better it looks, how much easier it is to apply, and how much less finger print prone it is too. Seriously, this brand may be the most popular on amazon, but avoid it. It sucks balls. I had 2 of them in a row have permanent bubbles, which usually never happens with tempered glass. The supershieldz one though, I tapped one corner, and it then stuck to the rest of the screen on its own, with zero fucking bubbles or imperfections whatsoever. And it looks much better

1:26 take out the extra "the" ;)

Yea BS, mine came out a bubbly mess.

Wonder why making a 1080p video as a company like yourselves is so hard. I love the products But dude Be more competent... :s Sorry for the rudeness, I just find this very unprofessional, with th 480p quality for no apparent reason