AMP Power Steps for the 21+ Bronco 2dr & 4dr with INSTALL Guide!

Рет қаралды 27,623

Күн бұрын

6/20/23 Update - These AMP Steps are finally back IN STOCK NOW! Limited inventory, act now.
For those looking for an easy way to get in and out of their stock or lifted Bronco, the AMP Research PowerStep is a sleek and stylish solution providing high clearance when tucked up and a large 13" drop when deployed. In this video, we'll cover everything you need to know about these steps as well as an installation guide to show you just how easy they are to install yourself with a few basic tools.
PRODUCT LINKS =====================================
AMP Research PowerStep (21+ Bronco): motoroso.link/c4632d
AMP Research PowerStep Smart Series: motoroso.link/dip
CHECK OUT THIS GREAT ALTERNATIVE: Go Rhino E1 Power Running Boards
Go Rhino E1 Video: • Go Rhino E1 Electric R...
Go Rhino E1 Running Board 4-Door: motoroso.link/60d
Go Rhino E1 Running Board 2-Door: motoroso.link/323
RELATED VIDEOS ====================================
All Side Step Options for the New 21+ Ford Bronco: • All Side Step Options ...
Powered Step Sliders from Rock Slide Engineering: • Powered Step Sliders f...
Rock Slide Engineering Step Sliders for the 4-Door Bronco: motoroso.link/c6aaa2
Rock Slide Engineering Step Sliders for the 2-Door Bronco: motoroso.link/0c841d
CHAPTERS =========================================
0:00 - Intro
0:50 - The Powered Step Options for 2-Door Broncos
1:10 - The Offerings from AMP Research
1:50 - How the Steps Work
4:02 - How it Works on the 2-Door Bronco
5:02 - Installing the Motor Linkage Arms
6:31 - Installing the Wiring Harness
8:31 - Installing the LED Lights
9:04 - Installing the OBD II Module
11:00 - Installing the Side Steps
Shop at www.motoroso.com to browse over 1,000,000 top, name-brand aftermarket products, sold by trusted vendors at great prices, and the shipping is always free!

Пікірлер: 34

@jasoncopeland781 2 жыл бұрын

A chop saw with a rough cut wood blade cuts aluminum profile material fairly clean, square, and with no damage to the blade. We cut aluminum tubing this way all the time. Great install video!

@sdotperez Жыл бұрын

Appreciate the tutorial, very easy to follow and helped me quite a bit during the install on my22 black diamond 4 door. Knocked it out in 3 hours with beer/bathroom breaks. It would be convenient if the bypass/disable switch (once available) could be wired to the aux switches if on uneven terrain or removal of the doors.

@RICHARDEDEL 2 жыл бұрын

can’t wait for mine to come in , I am really glad we met on the phone! Your very knowledgeable and helpful!

@Motoroso 2 жыл бұрын

Thanks Rick, appreciate the kind words!

@RICHARDEDEL 2 жыл бұрын

@@Motoroso going to get the rims lift hopefully in the next couple weeks

@ALexschmalex 2 жыл бұрын

@@RICHARDEDEL awesome, we’ll be here when you’re ready!

@kirvo11985 2 жыл бұрын

I think each install video has convinced me to go with these when my bronco finally arrives (whenever that will be 🙄). I’m not a big fan of the magnet aspect and these not using magnets is a big plus. And while these aren’t rock sliders, they will offer some lvl of protection and even when they are beat up, they should still deploy and be useful. My question is, what happened when you remove the doors? Just unplug the obd2?

@BuckingBronco 2 жыл бұрын

Sexy looking steps! Good, thorough installation video.

@user-gx1lv7mb6y 5 ай бұрын

Great video. So after installing both these and the go rhino/Rough country option which do you prefer? The price point on the rough country is hard to beat if you can deal with the magnets. Regarding the amp install and the posi-tap step, could you use t-taps there instead? Would that be any easier in that tight spot with little wires?

@ivanchanliongco9043 Жыл бұрын

Do I need to cut the grey with orange and purple and orange in half and attach both halves to one end of the small posi tap?

@Motoroso Жыл бұрын

No, the positap taps into the wire.

@ChouDa243 Жыл бұрын

Is there a way to link this to the broncos locking mechanism? Like when you unlock the bronco, it would deploy, and when the doors lock, it retracts?

@Motoroso Жыл бұрын

No, don’t think so.

@dennisconner7988 2 жыл бұрын

What happens to the steps when the door is removed?

@Motoroso Жыл бұрын

AMP makes an override switch to operate the step, you’d want that to use them with the doors off.

@timv4554 Жыл бұрын

Can the override switch be wired to the one of the aux switches above?

@Motoroso Жыл бұрын

Not sure. Have seen the question, but haven’t seen it done.

@jedclampett6466 6 ай бұрын

Why couldn't these be retro fitted to an older bumpside?

@johnsedlack3424 6 ай бұрын

How do I hit the link

@davehahn23 Жыл бұрын

How do these work when the doors are off? Are they stuck open or is there some manual operation?

@Motoroso Жыл бұрын

You can disconnect the OBD2 and they’ll stay up. Or You can buy a plug in that allows you to operate manually.

@davehahn23 Жыл бұрын

@@Motoroso Thanks for the quick response. Another question. Can you hard wire and not use the OBDII port, say if you are using the OBD for a tuner?

@Motoroso Жыл бұрын

@@davehahn23 not that I know of. If you prefer a non-OBD2 power step and also want some off-road protection, check out the Rockslide Engineering StepSliders.

@tiko4337 Жыл бұрын

What lift and tire size is on that Bronco?

@Motoroso Жыл бұрын

4" Lift, 35" tires

@douss11 Жыл бұрын

would this work if I have the tube doors >?

@Motoroso Жыл бұрын

This is a good question, I'm not sure how or where Ford senses the door. If its' in the latch, then I imagine so, yes. However, its probably best to just add the override switch ($57) anyway so you can control it with the doors off too.

@douss11 Жыл бұрын

@@Motoroso can you provide me the link?

@Motoroso Жыл бұрын

@@douss11 www.motoroso.com/p/72014-amp-research-79106-01a-powerstep-override-switch

@johnhenschen3629 Жыл бұрын

How would they work with no doors.

@Motoroso Жыл бұрын

AMP makes an override switch, here's the link: www.motoroso.com/p/55521-amp-research-79105-01a-powerstep-override-switch?lid=1679535

@buy4r Жыл бұрын

Dang I drop that little red cap 😢

@Motoroso Жыл бұрын

Ugh, yeah that stinks. Remove those panels carefully to get in there and recover it.

@robertwhitemoto Жыл бұрын

Steps installed... this video helps but moves over quickly some key steps, ...paper instructions are horrible. Here's what to look out for. 1) mounting the articulating arms is slow and difficult getting a wrench in on the lower bolt of all 4.. so thread those as much as you can prior to attaching each arm... fewer turns, once on is helpful. 2) motors might not line up with the mounting holes with the arms fully extended... don't worry about that, just bend the arms until the mounting holes line up, they will self orient once connected to electricity. 3) Don't screw up on the heat-shrink connections when attaching the lights,... they don't give you any extras. 4) the tiny posi-tap connectors are difficult to connect on tiny wires... you can only get to it with one hand, and if you drop them, its a royal PITA to retrieve them. These won't be threaded when you think they are and you'll drop them behind the kick plate... be very careful and sure. 5) It's good to have a second set of hands when you go to attach the steps.. getting it all to line up and not strip the threads on the hex-head bolts (of which they give you no extras) is difficult with one person.