2021 Ram 3500 Tradesman longbed.... I just turned 65, I couldn't get in my new truck without the AMP automatic steps, they are a lifesaver because of my disability, they retract low enough for me to safely board the vehicle, cheap nerf bars would have been dangerous for me. Thanks AMP....

I am only getting these steps bc of you. Your explanation was great Thank you

The installation is super easy, barely an inconvenience.

Thank you for the video. I drive a 2020 Sierra AT4 and it’s even higher off the bat, oh I’m also pregnant so these steps are going to be a lifesaver.

Totally agree with your motives for running these on a truck. I have 2 little ones and definitely plan on getting these for my truck.

The power step is the best one of the best investment I did for my Silverado project

Great video! I’ve got a total of 9inches in lift kits on my ‘08 Dodge Ram The 4x4 shop is putting that power step on my truck.

I realize this is an older video. A side by side comparison of the technical differences between the "regular" and "extreme" would be appreciated. Four vs. two motors probably extends the life of both the motors and the hinges. I think people would feel better if they knew that the hinge/arm components are beefier as well as the undersides of the rails. I was checking out the (more expensive) Rockslide step. They sell a version/add-on that uses higher strength steel to protect the retracted steps. I personally like the lower profile look of the AMPs.

I just purchased the plug and play model for my 2016 Dodge Ram. Their getting installed tomorrow. I can’t wait because I’ve just got my second knee replacement and it’s impossible for me to get into the truck. Looking forward to driving again.

Excellent video, made the install painless. I have elderly parents and in-laws and these steps are perfect for helping them get in & out of our truck. in addition the use of these steps seem to be saving the seats from unnecessary wear on the bottom cushion outer sides. Side note: you did not cover the led light portion of the install, nor did you even mention them in your video. But still a great video.

I bought this set for my brand new 2018 Ram 2500 Mega Cab and they gave me fits to install them! I followed the written instructions exactly to the letter. Got all done, was all proud. Put power to them… And the retracted up under the truck and wedged behind the pinch welds. I worked for hours putting brackets and linkages on than taking them back off numerous times, I adjusted brackets and linkages to NO avail. The boards jammed up and got stuck under the truck every time to the point where I had to remove the motors and pried them out from under my brand new truck scratching up the AMP Research running boards. Decided to call customer service. I called and spoke with Brian Weaver. I explained my situation and he seemed to know exactly what happened. Brian said “they got stuck behind the pinch weld right???” I said Yep!!! He said with a snarky little attitude “I’ll send you an email that’ll explain what to do”… So I get this email with an eight step process to remedy the problem. I followed that set of instructions to the letter again. Well step # 8 said if all else fails take a hammer and bend the pinch weld seam over to make it fit. I tried but I would have had to bend that seam over 45 degrees and I didn’t want to go that far with the sledge hammer. Long story short I had to take a 4” angle grinder, remove ¼” + off the top of the pinch weld seam to get my new $1500 AMP Research’s running boards to operate on my $70,000 brand new truck. Needless to say I was PISSED!!!! For that amount of money the AMP Research product should have fit like a glove. If you are looking to buy a set of nice power retractable running boards LOOK SOMEWHERE ELSE! Don’t spend your money here, You will be Disappointed !!!!! PS… I took the AMP Research badges off the steps so they don’t get any free advertising from me. They better run flawlessly for a long time… If they so much as hiccup I’m going to unbolt them and throw them into the dumpster……. I’ll definitely let you know…….

Great informative video👍🏻

Great video.. would love these for my 2018.. just they cost quite a bit..

For easier installation and torqueing the Bolts, could you put the brackets on and torque them down before then putting on the motors?

How do these hold up in the car wash with the under carriage wash? Did they ever cake up with snow or ice from driving down the road? Live in PA so winters can get bad.

Thank you for the video. Are the stepping area the same size/width for both regular and xtreme running boards?

Very nice job well done

Nice Video

Great video, you need some more studio/room lighting! I felt like you were in a cave!

Also, any news about 2021-22 Bronco kits would be great! Thanks.

I have Low vision and I’m Not mechanically inclined, so I’ll have to have them installed

What is the Width of the actually step. Looking for my elderly father. Is it the same as the XL version

I'm looking at getting these for my truck very soon. Obviously having 2 motors per step is better than one, but is there any other benefit other than "more is better"? Are the linkages beefier on the xtreme? Is the board itself more significant? Just trying to justify the added cost of the Xtreme. Thanks!

How can i found the OBD2 for my car cause the original has been lost and I can’t connect the power step to my vehicle

Hello. Other that beefier components, is there a deployed height difference between the two? TY

Is this available for a 93 Bronco?(no-OBD)

So the only difference between these and the "old" version (got mine (idk) 4years ago is 4 motors and no idlers, or is the steps physically bigger somehow?

I appreciate the video. These steps (especially the new extreme models) have been on my mind for a while lol. I guess my only concern i have about these is "what if they break" from what i have seen they would usually stop lowering if something is in the way or will not go up if you have you foot on them while closing the door. I know you said in your video that they have served you well. But i guess im just trying to hear it again lol. Have you ever heard of these messing up when there is mud involved. I am not a hardcore off roader, but sometimes when im working the places we would be in are pretty muddy. Would hate for one of the motors stop working because of some mud.

We have these on our 13 ram 1500..totaly love them..when they go up they are totally hidden with a 6" lift..I noticed on the new ram limiteds the steps don't retract to a hidden position..I think it looks terrible..and I wouldn't buy them for this reason..why don't they hide atw anymore ?

I have this on my pick up but there’s 2 light ( one at the front driver side and the other on the back at the passenger side) the light is not working. What should I do? There’s 4 light only 2 is working the other 2 is not. Can you help?

Would you put this on a 2023 Toyota Tacoma TRD Pro?

Have you had these scrape the curbs when deployed? I like that they're low but want to make sure this doesn't happen

I've been looking at these steps but found that AMP doesn't make a model for my regular cab truck. I'm curious if I could use a pair for an extended cab truck. That way I could use it to access my bed tool box.

I Got A 2014 GMC Double Cab In My A MP Running Boards It Hitting Tha Piece Of Metal under tha Truck That Tha Fram Sits On Please Help Me

i got a new control system for my 16 f-250 and they would go up when you open the door and go down when you closed the door. its a great plug and play you cant screw up they only plugin one way. Has anybody had this problem

You said the lights were included. Are they also just a plug and play?

Can you please do a review and install video of Rolling Big Power Stealth Running Boards, from what I’ve researched they’re better made than AMP (Sealed & IP68 Rated), cheaper given the options but the install seems a lot more difficult.

Do you have the part number for the power steps?

Did you get the extended cab or the 4 door set?

Can u unplug the OBD port if u need access to that port? Then plug it back in.

I order a amp set and wanted to know well I get negative feedback from people are they worth getting?

Do they make these power one foe the kia telluride

i have 1996 ford f 250 do i have clearance for the motors and mounting im sure custom bracket holder , anyone done this on a older truck

can you lower the steps without opening the door(s) to wash them?

So these drop no lower than the older version, correct?

You don’t have to run any wires through the cab on the passenger side do you?..

My Amp step broke on my Dodge truck and after 3 days of calling and talking to over 20 people I may have got enough information to order new parts. I need a power step for my 4 runner and have decides to try a different company after all the headaches to order over priced parts. They told me to order a new set instead of one wore out arm because of cost.

How low do these steps go?

If you daily in the rust belt these will seize up. The bushings cannot be lubed. I had a 2010 F150 with AMP running boards. Both were unusable at 100k miles. I knew this was a potential problem and kept them clean and sprayed them with lube frequently. Unfortunately there is no way to push the salt out and they seized.

Whats the difference between the AMP research "XTREM" vs AMP research "XL" ?

I ordered a set 3 weeks ago . And now there saying Dec. 8

I find it odd that you mentioned one time the extreme has four motors and nothing about any reason why replacing the same two motor steps. Four motors are considerably more expensive. Other than not cutting the boards, why did you swap them out for four motors? Also, now living in a desert you don’t worry about ice and you said the two motors worked fine in freezing weather. Why four motor steps? Are they $700 better?

No lights installed/

These motors arent sealed and are very vulnerable to moisture. Check out the RBP ones.

Any for ram??

The connectors that Amp uses suck i suggest you solder the inside connections.

Mercedez benz 6×6 has that

What the heck is the phone number so I can call them direct?

They’re trick,but too many inherent problems with them with road salt, snow,ice, and mud.Can’t see how they could stand up to that for very long.

Mine have been absolute garbage! I wont ever buy them again. I live in Canada and trust me, we get snow. If its cold outside, they wont go to up. If there is any bit of snow or ice on them, which after 2min on the road there is, they go up part way and shut off. Not only that, but the paint peeled and flaked-off the boards and exposed the metal. Now, motor has seized and they wont move. I wouldnt recommend them to anyone. They are expensive and a hassle. Yes, they look good when they work, but....

$1600!? What!? 😂