AmpSentrix Core with Tag-on Flex | iPhone Battery Replacement

No video

AmpSentrix Core with Tag-on Flex | iPhone Battery Replacement

Рет қаралды 34,149

Күн бұрын

A how to video on replacing the battery in an iPhone using an Ampsentrix Core battery with tag on flex to avoid having the message that identifies a replacement battery and to retain the battery health at 100% in settings.
All tools and parts used in this video can be found at our website:
www.mobilesent...
#iphone #iphonebattery #iphonerepair #iphonerepairing #batteryreplacement

Пікірлер: 113

@Faysalariss Жыл бұрын

Wow, MS always comes with great solutions, makes this repair much easier.

@e-texwireless Жыл бұрын

I followed the instructions to the tee and, although I'm not seeing the "Unable to verify" message, the new core battery still shows the old battery's health. I figured the tag-on flex was defective, so I ordered another one and installed it, again allowing the phone to boot from the lightning cable, giving it time for the tag-on to program, then rebooting the phone. But I'm still getting "Your battery's health is significantly degraded" along with the old battery's health percentage. Sounds like I need to get the battery programmer. Any ideas? UPDATE: I was able to get this to work by installing a new AmpSentrix battery, turning the device on to prompt the "Not a genuine part" message. Then I turned it off, reinstalled the new Core battery, and voila! Battery health at 100%, no "Not a genuine part" message. Very happy!

@Myriddlemind Жыл бұрын

Are you done with ios 16.5?

@e-texwireless Жыл бұрын

@@Myriddlemind Yes, it is running iOS 16.5. Interesting note: Initially, I could not get it to charge past 95%, regardless of how long I left it on the charger. The next morning it was completely dead with Battery Health showing a sudden drop to 0% during the night. However, in the next charging session I was able to achieve 100%, with normal usage readings ever since.

@Myriddlemind Жыл бұрын

@@e-texwireless Great for you. I contacted them and they will do an update in the next few weeks.

@e-texwireless Жыл бұрын

@@Myriddlemind Okay, here's another update. I checked the battery stats this morning and noticed that shortly after 12 am the battery took a nosedive from 95% to 10%. This wasn't a gradual decrease, but a sudden drop. The screen was locked and no apps were open. I bought this device to refurb and sell in my shop and was hoping I could preserve the battery health functionality with the tag on flex. Now I'm afraid it's a little too unstable for that purpose.

@harleygoodies9001 22 күн бұрын

I wonder what happens if you update the OS?

@marcuskjellerup9905 Жыл бұрын

If you remove the Tag On, could you please verify what reading you get with 3U Tools? When we have tried this, 3U Tools reads old battery value is the Tag On is nog connected to the iPhone.

@bartekm9parts478 Жыл бұрын

you need to leave it inside otherwise it will show old condition in 3U Tools and will work the same.. Also try to fully bend to the back the battery fpc.

@Faysalariss Жыл бұрын

What do you mean by work the same? And as long as its 100% the customer would be fine with it, only other techs would check using 3U

@PeterGiesbrecht96 Жыл бұрын

After a couple weeks 3u tools also shows 100%

@miamirepair5821 Жыл бұрын

When you do software update the battery % go to the battery original %. I don't recommend to remove the Tag

@dandaniel30286 10 ай бұрын

Great tutorial, but I would make removing the tag on flex mandatory and not optional. The tag on flex can potentially move and rub the battery enough to short out causing it to need to be replaced.

@toystorybro Жыл бұрын

**Troubleshooting** If the old battery health still appears and the battery notification persists, you will need to re-trigger the iOS stack battery notification window. To do so, remove the new Ampsentrix battery (with its tag on flex) and install any new test battery with a functional BMS. This will prompt iOS to recognize a battery with a new serial and allow you to restart and repeat steps in the video.

@vamoshe3 Ай бұрын

Hello, I wanted to know if it is suitable for all versions of iPhone?

@MobileSentrix Ай бұрын

yes, but the iOS 17.4 and newer phones need to be reset after the process shown to fix the data. Thanks Apple lol

@christophermanners3838 Ай бұрын

Will it work if you take the flexs out and factory reset later on

@Akalyzer Жыл бұрын

Does the new battery will show the real health or it will remain at 100% forever?

@juergenwest Жыл бұрын

I was curious about this as well.

@fbnmndz Жыл бұрын

@@juergenwest curious as well, did you guys get an answer?

@danydjlast Жыл бұрын

Quiero saber lo mismo , nunca he visto que bajen de 100% , alguien podría decirnos si es verdad, pero con pruebas ! No especulaciónes ?

@TheSlavenger Жыл бұрын

it will decrease, it will not stay at 100 forever

@TheSlavenger Жыл бұрын

@@juergenwest it will decrease, it will not stay at 100 forever

@PEREGRINO45 Жыл бұрын

El tag es reutilizable? Ósea puedo hacer el proceso con otra batería o es de un solo uso?

@idanslab9541 Жыл бұрын

Funciona con todos los modelos? Puede haber alguna actualización que revierta los porcentajes de la vida de la batería como sucedió recientemente? Gracias

@SaulCevada Жыл бұрын

Si actualizas y no dejaste el flex regresara el % de la vida que tenia antes tu batería que quitaste.

@danydjlast Жыл бұрын

@@SaulCevada con la programadora icopy no pasa eso ?

@emilianoperez8562 Жыл бұрын

Con la Jcid queda 100% aunque actualices. Y usas solo un tag on para todos los equipos. Con este sistema nuevo tenes que dejar el tag on si no queres que el cliente venga al mes que viene al actualizar su equipo.

@xCrusaderOfLightx Жыл бұрын

I did this repair just now on a iPhone 13 mini using the tag on flex. Booted the phone with the lightning cable like you showed. It still shows the old battery health from the customers previous battery.

@MobileSentrix Жыл бұрын

Its possible that the tag-on flex was in the wrong orientation, or had some unwanted tension on it. It needs as much room as it can have inside the phone like any tag-on flex. Try it again and see what happens

@Tuckerpellicci Жыл бұрын

If you wanted to program the battery using the tag on flex, would it work the same? In other words, does the included tag on flex work the same as the previous Qianli tag-on flex models?

@carranzagustavo Жыл бұрын

Hola una pregunta con este tipo de bateria ya no es necesaria la programadora ? y el flex se tiene que quedar puesto ? muchas gracias saludos

@Jbrimbelibap 2 ай бұрын

These can now be bought for like 4€ on aliexpress depending on phone model

@patriciovarela8794 Жыл бұрын

Great video. Thanks Can I reuse the tag flex on the same model with a different phone?

@pedromarquezmunguia8604 2 ай бұрын

Same asking

@donevangravelle 10 күн бұрын

@@pedromarquezmunguia8604 yes

@SilasTh3Weird 6 ай бұрын

Iv'e been using MS parts for year s and they are great, if you don't have a spot welder can you solder the bms board to the new core?

@orett.x Жыл бұрын

Do you ever try the tag on flex without an original bms board

@user-ic8cx9qq9c 10 ай бұрын

Here is the big question. Does the battery health decrease over time as it should?

@celedoniomanubag9440 10 ай бұрын

Nyesss

@adeguntoro 6 ай бұрын

is this one time use ? or i can use it as many i want to ?

@marik_hadare Жыл бұрын

Hi, so I don’t need programming the battery anymore when I the tag? It’s a lot easier now then!

@spencerparkes7328 Жыл бұрын

what and where can i get that grinding bit, i have a dremmel. thanks

@matiasdiaz7786 11 ай бұрын

Usted sabe si el flex es de un unico uso o si es reutilizable?

@leonelgianinetti3178 5 ай бұрын

no le saques, si le sacas y se actualiza el software pierde la condicion, si se lo dejas puesto no

@axxomovies-he6zi 9 ай бұрын

I assume soldering is out the question ❓

@oscarmartinez8435 Жыл бұрын

What if the original battery has been removed. What can be done about restoring the battery health information?

@LightningRepairs Жыл бұрын

Nothing. Besides paying an Apple Authorized place for a battery replacement. (UBREAKIFIX, CPR, Best Buy, Apple Store, etc)

@PeterMan55 Жыл бұрын

nothing, only apple can

@TheSlavenger Жыл бұрын

Worked amazing for my first 11 battery fix, second one not working at all unfortunately, any ideas?

@peterluong5812 Жыл бұрын

Were you able to figure it out? Mine is not showing the non genuine battery message after prompting to boot from lightning cable.

@TheSlavenger Жыл бұрын

@@peterluong5812 yes actually, im pretty sure I had a bad tag on flex, once you prompt boot by cable you need to power off, then power back on manually (with power button)

@peterluong5812 Жыл бұрын

@@TheSlavenger thanks for the reply. Unfortunately I don’t have another tag on flex to try. Guess I’ll just have to live with it for now

@bigtreeproductions 8 ай бұрын

How are you able to do this without a second battery? I thought you need the second battery to bring up the "non genuine" message and then use the battery with original BMS and tag on flex. When I try the method in this video I don't get the battery message and the battery health still shows the old number. Please advise.

@faridjxo4884 3 ай бұрын

Hi i have the same thing, did you solve this problem??

@bigtreeproductions 3 ай бұрын

@@faridjxo4884 I think you have to have a second battery to get the “non genuine” message. Then switch to the new battery with the original BMS and tag on flex.

@PhoneFlipProfits 10 ай бұрын

Is the tag on flex reusable?

@BirdManPhil Жыл бұрын

Is this working in 16.5 ?

@simornyun7646 Жыл бұрын

Where find flex?

@Rkelani Жыл бұрын

can i just solder it using a solder iron ?

@floridaapplemacprosinc.2224 7 ай бұрын

as connections with power can get hot, solder is not very reliable. especially if someone uses low melt by accident. battery spot welders are cheap. under $50-75 I think

@carlosovalle8899 7 ай бұрын

yes, but you need a different soldering wire, different alloy otherwise regular soldering wire will not stick to the battery.

@niazdevaj Жыл бұрын

Wow the Tag-on Flex is stronger than my first 2 marriages. #3rdTimesACharm

@rspaulding 8 ай бұрын

Can you just solder it instead of the tack weld? If no, why not?

@mattheww797 2 ай бұрын

no, don't solder batteries.

@revampmobilesolutions8851 Жыл бұрын

Is the process same for higher capacity batteries? I wonder what that would show for battery capacity and health if it’s higher than original spec? Love the vids, keep ‘‘em coming ❤

@MobileSentrix Жыл бұрын

It will show 100% on them as well as The iPhone software wont go past that, but the phone will function with extended battery charge

@henryce7 10 ай бұрын

@@MobileSentrix I asked a technician and he told me that there is a risk of it burning if I put more amps on the iPhone, could this be true? I have an iPhone 7

@Fizzi-gf2og 9 ай бұрын

@@henryce7 hi there , im a iphone 7 user too . to answer your question it is about the quality of the battery . some company sell conterfeit product out there so you need to be careful. I use high capacity battery and it works just fine although it produce more heat but it is logic but you need to make sure you buy the trusted company for the high capacity battery . some of them are knock off product but claim to be high capacity. mine luckily is good at 2400 mah for iphone 7 . some knock off battery claims 4000 mah for iphone 7 which is totally bs ofc. so i hope i answer your question.

@LightningRepairs Жыл бұрын

Are the tag on flex's reusable, if you remove them post-repair?

@martindigital6418 Жыл бұрын

Lemme know if you get an answer on this my dude

@MobileSentrix Жыл бұрын

leave them in the phone as there are several reasons to do this. You get one with each battery as well. so there's no need to hold on to them.

@LightningRepairs Жыл бұрын

@@MobileSentrix what are those reasons? I would rather buy the AmpSentrix Core batteries w/o tag-on flex & save $1 on every battery + be able to center the battery properly instead of scootch it too far to the left, to accommodate the extra thickness of the additional flex material. If there are actual reasons to leave it in, I'll happily do that :-) I just want to know and understand what those reasons are.

@Faysalariss Жыл бұрын

@@MobileSentrix I would like to know the reasons as well, removing it eliminates a weak point making it more reliable

@mmwienk2 Жыл бұрын

What do you mean by “prompt to boot with lightning cable”? Do you mean just plug in cable to boot it or do you have to something first? Prompt word is throwing me off. Helps pls

@MobileSentrix Жыл бұрын

Yes Prompt to boot just means turn it on with the cable and not the power button.

@juergenwest Жыл бұрын

Is battery adhesive included in the kit like all the other ampsentrix and service pack batteries or sold separately for this model? Didn’t see it in the video.

@MrBlowmyselfup Жыл бұрын

the "core" batteries don't come with adhesive.

@faridjxo4884 3 ай бұрын

can anyone tell me why it doesn't works for me? I do the exact same this, boot with cable and it still the same % than before

@slyclone5297 18 күн бұрын

Are you on ios 17.4 and later? if yes, you have to flash the phone to get the 100% reading

@donevangravelle 10 күн бұрын

@@slyclone5297 i have a couple iphone 13 that still show same percentage after doing restore. any suggestions?

@slyclone5297 10 күн бұрын

@@donevangravelle did you use 3utools

@swyampatel4815 9 ай бұрын

What is the tool used to prep the surface for spot welding?

@interlogic1 5 ай бұрын

Dremel

@bartekm9parts478 Жыл бұрын

Also does this tag on flex need programming? Because you didnt show it :(

@saadmasood4797 Жыл бұрын

Bro watch the vid. He literally says no programmer.

@atakanaynaci Жыл бұрын

What is the purpose for that extra flex cable which you all removed later?

@christophermanners3838 Ай бұрын

To get the battery health on phone

@lallyji8051 Жыл бұрын

Love your vids but please equalize audio levels of voice and music. Music gets too loud compared with your voice. I am constantly having to turn audio up and down because of this and its very annoying. Thanks.

@OdusEstore Жыл бұрын

Tf are u talking about ?

@adriananzano2292 Жыл бұрын

can you use normal solder instead of spot welding?

@noynayru Жыл бұрын

@rspaulding 8 ай бұрын

@@noynayru why not?

@edobosho 2 ай бұрын

@@rspaulding regular tin soldier doesn’t stick to nickel. Need spot weld or nickel weld

@anthonys9103 Жыл бұрын

WHY??? I have been replacing batteries for 14 years and it is rare when a customer is really upset that it is not an original battery. 90% of the time, they don't really care. If they do, as an IRP, I just order an original and program it with Apple software. Even in Apple internal docs, if they open a phone and see a non-OEM battery, they require you discharge the phone and then proceed with any repair other the battery.

@PhoneFlipProfits 10 ай бұрын

I think this is kind of important especially when reselling and multiple parts have been replaced on the device. Its a little bit of an extra step but Ive noticed a lot of customer asking about the battery health lately. For repair service if someone is paying to have their battery replaced this doesn’t matter that much unless the customer is willing to pay more

@carlosovalle8899 7 ай бұрын

Here in USA people really don't care about the warning messages of battery or screen. In Colombia people are obsessed with those messages , battery percentage or true tone. Me personally I don't care

@Myriddlemind Жыл бұрын

It won't work with the new ios [16.5]

@BirdManPhil Жыл бұрын

Are you sure. Injured gadgets tag on flex works so why wouldn't these

@Myriddlemind Жыл бұрын

@@BirdManPhil Yes, Even an injured gadget won't work as well. It works when tagged on Flex. It has an issue with iPhone 13 series.

@BirdManPhil Жыл бұрын

@@Myriddlemind so they work if you leave the tag on flex on?

@BirdManPhil Жыл бұрын

@quickfixrepair5569 can you be more specific please. Will it work if you leave the tag on flex installed?

@Myriddlemind Жыл бұрын

Yes, It works when you leave the tag on Flex but sometime it won't work properly, I have done 13 pro max in the last few weeks, and the customer returns it back.

@twelvepins Жыл бұрын

I think the best solution is to stop buying iPhones, I’m a iPhone fan, but I’m sick off Apple locking down everything, wait and see when the new iphone 15 is out, you only can charge it with only approved apple USB C cable, time for people like me to cop on, and stop giving apple my money

@Lux197live Жыл бұрын

A useful tip: leave the tag plugged

@lightwxrk Жыл бұрын

why?

@kcastillo1234 Жыл бұрын

@@lightwxrkbecause why take the extra time to remove it

@Emrulator Жыл бұрын

@@kcastillo1234 because leaving it in is useless and costs money. it also has additional potential for errors and you can continue to use the day on in the workshop. So all of that is worth a few seconds to me

@taylorman57 11 ай бұрын

I definitely wouldn’t leave a mobile sentrix circuit board in my phone if it isn’t needed. Good chance that flex will fail and then you’ll have to open the phone up and take it out anyways.