TOTO Manual Flushometer | Piston | Repair and Replace
Рет қаралды 11,853
Күн бұрынIn this episode of Repair and Replace, Vance shows how to replace the piston in a TOTO Manual flush valve. This applies to both commercial toilets (water closets) and urinals.
Browse flush valve replacement parts: www.amresupply.com/catalog/674794
More TOTO Flushometer repairs:
• TOTO Flushometers - Re...
___________________________
00:00 Intro
00:21 What You'll Need
00:30 How it Works
01:33 Step 1: Shut Off the Water
01:53 Step 2: Remove the Piston
02:10 Step 3: Install the Piston
02:46 Step 4: Volume Adjustments
___________________________
AMRE Supply provides homeowners, service contractors, and property management with the parts and knowledge needed to get the best performance out of any property. Stocking the largest selection of appliance parts, heating, plumbing, lighting, and janitorial supplies, AMRE ships almost anywhere in Canada within 24 - 48 hours. Expert help is available online, over the phone or in person at one of the many locations across Canada.
Connect with AMRE Supply
Website - www.amresupply.com
Facebook - / amresupply
Twitter - / amresupply
Instagram - / amresupply
@arisriskani4389 7 ай бұрын
Thanks..very helpfull
@AmreSupply 7 ай бұрын
You're welcome, we're just happy to help!
@mycc1694 5 жыл бұрын
Thanks for the video. But how do I know if the wrong piston was used?
@AmreSupply 5 жыл бұрын
Hi Mike, thanks for watching! If the flush volume seems off, (too long or too short) then it might be an indicator of the wrong piston. If a urinal piston was used you'd likely not have enough water to clear the toilet as the gpf would be very low.
@AhmadFauzi-my5uh 3 жыл бұрын
What is the water pressure required to operate the unit normally?
@AmreSupply 3 жыл бұрын
Thanks for watching. Generally urinals require a minimum of 15psi to operate, and water closets require 25psi of pressure. Most codes mandate a maximum of 80psi.
@fatihabdjn9877 3 жыл бұрын
بسم الله الرحمان الرحيم
@AmreSupply 3 жыл бұрын
Thank you for watching.
@gloryland59 3 жыл бұрын
Water dripping into bowl, replace piston?
@AmreSupply 3 жыл бұрын
Thanks for watching. The piston would be the best place to start. Also check to see if there is any mineral buildup on the inside of the valve. That could affect how well the rubber seals on the piston work.