No video
An affordable yet modern cycling computer - Bontrager RIDEtime Elite ANT+ Full Install + Review
Рет қаралды 110,731
Күн бұрынThe Bontrager RIDEtime Elite is a unique offering that fills that void, with a retail price of $69.99 and ANT+ connectivity. If you’re a Strava or data junky, the RIDEtime Elite may not be for you as it offers no GPS tracking and cannot connect to a computer to upload ride data. Instead, the RIDEtime Elite has ANT+ connectivity which means you can view your real-time power data, heart rate, cadence, speed as well as control compatible Bontrager lights. The large and clear display can easily be configured to display upto 3 data items at a time, or cycle through the lower display fields. Without a color touch screen or GPS, the RIDEtime Elite utilized a simple coin-style CR2032 battery that offers long runtime. Does the computer capture what makes basic cycling computers so attractive and combine it with modern connectivity? We’ll find out.
One of the most striking things about the RIDEtime Elite computer is just how sleek it is. Without the need for GPS or a large rechargeable battery, the computer is only between ¼ inch to ½ inch (at the center) thick with the large screen taking most of the computer face. The bezel on the screen is narrow except for the bottom to accommodate a button and the logo display. With only a 28g weight, the computer feels well built yet slim enough to store in a pocket. Attached to the out-in-front mount, the computer also looks modern and gives your bike a professional appearance.
The display can show up to 3 data fields at a time: large primary display on top and two smaller fields on bottom corners. The primary top display can be configured to show any of the sensor data values: speed, cadence, heart rate or power. The bottom display has a dual view option to also show any combination of the sensor data fields or show the avg/max speed/cadence values. All other data fields are only shown on the bottom of the display as a single item. The 'scan' mode also cycles through all available bottom fields...
... Read the full review @ thesweetcyclis...
~
00:00 Intro
00:13 Unboxing + Specs
03:18 Setup
09:05 Fit + Finish
10:52 The Final Score
~
Visit Our Website - thesweetcyclis...
Follow Us On Instagram - / thesweetcyclists
~
Bontrager Website - www.trekbikes....
~
@aaronevans6490 3 жыл бұрын
How do I turn off the maintenance icon?
@TheSweetCyclists 3 жыл бұрын
Here are the instructions (it's on the last page of manual above the night mode section): [1] Hold the front button for 5 seconds until you see the 'Clear Data' screen [2] Release button, then pick yes/no (I believe this will clear active riding stats except odometer) [3] Then you'll see the "Clear Service" prompt where you want to pick "YES" to eliminate the blinking wrench icon.
@damianrex8847 3 жыл бұрын
I know Im asking randomly but does someone know a method to get back into an Instagram account?? I was dumb forgot the login password. I would appreciate any tricks you can give me!
@giannimarco2981 3 жыл бұрын
@Damian Rex Instablaster =)
@damianrex8847 3 жыл бұрын
@Gianni Marco thanks for your reply. I found the site thru google and I'm trying it out now. Seems to take quite some time so I will get back to you later with my results.
@damianrex8847 3 жыл бұрын
@Gianni Marco It did the trick and I now got access to my account again. I am so happy:D Thank you so much you really help me out !
@jflivingston 2 жыл бұрын
Nice job! Very clear and well-paced speaking voice and comprehensive coverage of the set-up and features! Everybody should use this as an example. And, yes, I am going to buy this simple computer and use one of the Blendr options (probably the x2.) Thanks.
@Cesar-cm4if Жыл бұрын
Agreed! Btw if you're riding you should definitely wear an nta helmet like xnito or bern hudson, those cpsc helmets don't really protect you
@Kiwi-ot3wz Ай бұрын
I have the Ridetime mount for the Blendr system which essentially is the flat mount like the one provided with the Elite computer. One difference though - it covers the back button making it inaccessible without removing the computer from its mount. After setup, thats no big deal, unless you need to activate night mode and the backlight. Crazy !
@bryonleche3627 2 жыл бұрын
Great video! Answered all my questions about the computer and the lights.
@Hockey_Josh 4 жыл бұрын
Great review! Thank you for posting. I bought one yesterday, and this really helped me with the set up.
@Hockey_Josh 4 жыл бұрын
I tried to turn on the night mode, but the green backlight only shows up when I touch the bottom button. So does night mode only have the backlight when you touch the button, or should it be constant?
@hawkeyefootball7323 4 жыл бұрын
thanks for the review! I just purchased one as well Josh. This review was very helpful!
@Undergroundlongboards 2 жыл бұрын
Perfect review, thank you. Would love to see how to install sensors tho. Might be in another video i hope, gunna check your channel and search for it. Either way. Thanks again for the review!
@TheSweetCyclists 2 жыл бұрын
Appreciate it. We didn't include the sensor installation in this video as we purchased the sensors separately. Note you don't have to buy Bontrager sensors - any modern speed / cadence or dual speed / cadence sensor / etc will work with this computer and most GPS cycling computers.
@thenderaaa9252 3 жыл бұрын
A method of calibration My device was off by about +.6 of a mile every14 miles. This was after setting the wheel size to 700c:45 (The actual size on the bike), I believe the device just uses a look up of some sort to feed actual MM wheel size to the mileage computer based on the 700c:45. This was not close enough for me :) So to get around this I use the custom wheel size entry to set a smaller size wheel in mm. A smaller size reduces the mileage that is computed. This last ride was about 14 miles and now I am about -.2 rather than +.6. Started: 700cx45 = 2242mm Last: custom = 2155 mm This probably affects your speed computation as well, just not as noticeable?
@TheSweetCyclists 3 жыл бұрын
That's interesting. Did you try to actually measure the wheel circumference using a tape measure or string? Maybe your tires have some slight variation that is adding to the offset. I believe the wheel size is only used for speed / distance if you use a speed sensor otherwise the GPS data is used for both.
@carlosmotta6537 2 жыл бұрын
I keep coming back to this video 👍👍👍
@Elvis68spec 2 жыл бұрын
Very interesting Computer! Good video!
@MrChando1975 2 жыл бұрын
Thank for making this video. Keep it up.
@raygetson5436 2 жыл бұрын
Thank you. I used this video to set mine up. All worked perfect.
@TheSweetCyclists 2 жыл бұрын
Thanks! Glad the video could be helpful. The two button setup is definitely a bit confusing to use.
@raygetson5436 2 жыл бұрын
@@TheSweetCyclists It does everything I need. I don't require a Garmin with GPS and all the bells and whistles. This computer setup is perfect. Thank you, again.
@harrydelaney6623 2 жыл бұрын
Looovely do use your power on yiurs??
@SledDog100 4 жыл бұрын
One thing I have noticed is that once the computer times out, I lose the cadence and heart rate data for my last ride so I have to record that information immediately which is a little annoying. But I agree with your assessment simple affordable and easy to read if you do not want all of the other bells and whistles. Thanks! I have been trying to figure out the back light button. I found the instruction lacking and not as clear as this video.
@TheSweetCyclists 4 жыл бұрын
Glad it was helpful. I don't think computer stores anything aside from accumulated time and distance. The back light is one of the more annoying parts of the computer, I wish they had just added another button or made it automatic.
@jensiecast 3 жыл бұрын
Great content and the video has great aesthetics.
@dog-so1vj 3 жыл бұрын
Great video. I just bought a new Trek bike and it has the frame install point for the sensor. Did you have the Bontrager DuoTrap S sensor installed on your bike?
@TheSweetCyclists 3 жыл бұрын
I don't have a Trek bike, so I used Bontrager's separate sensors instead (www.trekbikes.com/us/en_US/equipment/bike-accessories/bike-computers-gps/bike-computer-sensors-accessories/bontrager-interchange-digital-combo-sensor/p/11323/?colorCode=black). The sensors worked well, but the DuoTrap design is much sleeker as it integrates with your frame.
@dog-so1vj 3 жыл бұрын
Ok. Thanks so much for the great info...😊
@soloban81 3 жыл бұрын
I had the Duo Trap S installed on my 2020 Trek Verve. Works great.
@chains4722 11 ай бұрын
I have a giant TCR with a giant ride sense sensor . Will the bontrager computer pick up a different brand sensor . I believe it should !
@dog-so1vj 11 ай бұрын
@chains4722 I purchased and installed the Trek Bontrager computer, which came with the Bluetooth Duotrap sensor as a package. From what I remember reading in their owners manual and on the internet, the computer should link with other Bluetooth sensors. I can't say for sure because I've never tried it myself, though.
@richardperkins3460 3 жыл бұрын
Great video. Just bought one. To replace my other Bontrager unit which would not stay connected. Hopefully this one will
@TheSweetCyclists 3 жыл бұрын
Glad it could help. Hopefully the replacement unit works out better for you, we haven't experienced any cutouts.
@robertgravel5160 2 жыл бұрын
Excellent review. Subscribed. I appreciate the fact that you took the time to put your camera on a tripod. Very stable and steady filming that’s easier on the eye. Do you know if this would be compatible with the Apple Watch 6 heart rate monitor ? Thanks
@TheSweetCyclists 2 жыл бұрын
Good question. We don't have an Apple watch to confirm, but based on other people's comments on forums you might need another app to broadcast the HR data to the bike computer. The Bontrager and nearly any other GPS computer can use a variety of bike sensors - you don't have to buy a Bontrager specific one.
@sierra7534 2 жыл бұрын
Great video. Thanks for posting.
@JahLoveGreen Жыл бұрын
I've managed to get it to pair with DuoTrap S but it's not showing me the proper speed - cadence and speed light blinks on the sensor but computer is not showing any data - this device is very confusing.
@TheSweetCyclists Жыл бұрын
Did you enter the sensor pairing mode and get a confirmation that sensor was found? The blinking light on the sensor just indicates you have it positioned correctly relative to the magnetic on the wheel. You may need to re-enter the pairing mode via the configuration menu.
@philipforscutt490 3 жыл бұрын
Great , I'm set up now. Thank you Good review
@TheSweetCyclists 3 жыл бұрын
No problem. Hope the RIDEtime works out well for you. It's still the sleekest computer we've received.
@nancycranbury8441 3 жыл бұрын
Hi - thanks for the in depth review. When setting up the device initially - how do you get to input the time minutes, and other data specifics - you just kept pushing the back select button to get to the next feature. Thanks.
@TheSweetCyclists 3 жыл бұрын
There are two setup menus - "primary setup" (language / bike type / time format / time / display units / weight / age / gender / wheel circumference) and what Bontrager calls "advanced setup" (sensor pairing / light pairing / display configuration). It's a single press on the rear button to enter primary setup, and a 5 second press to enter advanced setup - holding the rear button exits out of either menu.
@khaliqbasharahil49 4 жыл бұрын
Thanks for the review, few questions please. If i got this computer with the Duo Trap S and Apple Watch, can i pair both? Would i get all ride information? ie, distance, heart rate, gps, cadence, speed, rpm calories?etc. Also can i get the ride information on strava and Apple activity app?(accurately)
@TheSweetCyclists 4 жыл бұрын
Good question. We don't have the combination to try it out, but I'm pretty sure the answer is no. The RIDEtime Elite computer itself has no bluetooth connectivity or GPS so you can't connect it to a phone or extract any data logs. The Duo Trap S will transmit the speed/cadence to your Apple Watch/computer via bluetooth so you could use that in conjunction with Strava to track your ride. You wouldn't get any power/heart rate data unless those also had the ability to connect via bluetooth to other devices. If you want higher end connectivity features, it may be worth looking at Bryton GPS computers or what Garmin/Wahoo has to offer.
@sierra7534 2 жыл бұрын
Dumb question but you seem to be extremely helpful - I'm buying the DuoSport S for my new Trek bike and was wondering if I even need this bike computer or if there's a free iPhone app I can use to read the data? I can't really find anything online about it. Also, do you have the ability to turn your front and rear lights off with this computer? I don't want daytime running lights but would love to be able to turn on both front and rear lights with the press of a button at night.
@TheSweetCyclists 2 жыл бұрын
I'm not sure if Bontrager offers a cell phone app. Many of the cellphone apps can show you speed using GPS signal, so you don't even need a sensor. I do recommend using a bike computer instead of your phone - they are cheaper / smaller / more weather resistant on a bike. The RIDEtime Elite automatically turns the lights on/off (on as soon as you start moving - and off after a few minutes of not moving) but no explicit on/off button. I believe the higher-end Garmin computers have more ways to control and view battery status of connected lights though.
@laurachris2 4 жыл бұрын
I just bought the Duo Trap and the RIDEtime Elite computer. Now that I am home, I cannot figure out how in the world to remove the computer from the Blendr! How would I do that?
@TheSweetCyclists 4 жыл бұрын
I don't personally have the Blendr mounts, but based on the photos on Trek's website removing it is the same as with the standard mount. Just pull down on the tab under the top of the computer and pull the computer away from the handlebars. It should just slide out once you've pulled the tab down far enough.
@laurachris2 4 жыл бұрын
@@TheSweetCyclists I got it out. I just didn't pull the tab hard enough! Thanks!
@danielattias1525 Жыл бұрын
Thank you for terrific video.
@TheSweetCyclists Жыл бұрын
I'm glad it could help. The RIDETime Elite seems to be a surprisingly popular GPS computer.
@jimdent351 2 жыл бұрын
My computer came with sensors. I think you bought the wrong kit. You can buy it with or without sensors. It would make sense if you lost your computer that you wouldn't want to purchase the sensors too so you can buy just the computer. The same would hold true for the sensors. That's why you are given both options when buying. Check Treks website!
@TheSweetCyclists 2 жыл бұрын
Jim, you're correct. The $70 (apparently it's $75 now) version we reviewed was without sensors. At this price point, many GPS computers usually include at least the speed or cadence sensor with the headunit. You're correct, a more affordable headunit only option makes a lot of sense when you already have sensors.
@zzubuzz Жыл бұрын
11:45 so it does have a backlight, but what if you just leave it on for both day and night? I have the Ridteime (not the Elite model) and like it but I'm buying another bike and would kinda like to have a way to see it at night as I do lots of night riding..I'm thinking maybe there is some little LED light I could find on Amazon which would do the job. Too bad you didn't show it backlight in the dark.
@TheSweetCyclists Жыл бұрын
To clarify, it's a manual backlight that only stays on for 5 seconds when "night mode" is active and a button is pressed. The light doesn't stay on the entire time as that would drain the battery. There are other cycling computers with auto back lights based on light sensors or time zones that are better suited for nighttime riding (see the Bryton Rider computers for example).
@zzubuzz Жыл бұрын
@@TheSweetCyclists Good answer although I was hoping it would stay on when it senses darkness. I just got done minutes ago installing the Duotrap S, made sure the sensors are correct and also syncing my 2 Bont. lights, it did all of that. But it is perhaps better we don't drain the battery, BUT..I will scour Amazon for some kind of tiny LED light I can aim at the screen. Any suggestions? Probably many "key chain" type lights would work, but I want the dash of a space ship:)
@djkoti74 2 жыл бұрын
So whats the back BUN and the front BUN for again? :D
@robertirving4776 3 жыл бұрын
I can't get the back of the computer open. He doesn't show it in the video and the instructions don't say anything. I tried to unscrew like every other one I used will not unlock.
@TheSweetCyclists 3 жыл бұрын
The battery cover should just twist to unlock using any coin. If the cover doesn't popup off, right next to the lock / unlock indicator there is a small cutout where you can put a thin flat head / needle to help pry it up. Otherwise just give it some taps and it should come off.
@alexramirez118 4 жыл бұрын
Very simple. I love it
@isurubenaragama4942 3 жыл бұрын
Hello sweet cyclist. Its a very good review. Excellent. Thumbs up👍🏼 for that. I would like to know that how long will be the battery last ? I am a daily rider mostly everyday riding 100km. Please tell me about the battery life.and is there a big difference between ridetime and ridetime elite computers? Its a nice computer. Thanx. Wish you all the very best for your channel.
@TheSweetCyclists 3 жыл бұрын
Thanks, glad the review was useful for you! The battery on my computer has lasted about 8 months. You can't really turn the computer off which is odd, the computer goes into an 'idle' mode after 10 minutes of non use. The big difference with the RIDEtime and the RIDEtime Elite is that the Elite has ANT+ connectivity letting you connect power meter / cadence / heart rate sensors to it. If you don't think you'll need the additional sensors, you can save a little money with the standard version.
@isurubenaragama4942 3 жыл бұрын
@@TheSweetCyclists thanx a lot for your response and the assistance sweet cyclist.I really appreciate that. Its really helpful. Thank you soo much. Wish you all the best for your channel. Stay safe. Ride everyday. 👍🏼
@scottdowning2302 2 жыл бұрын
Would this be the most advanced computer that’s compatible with the duotrap s and the auto lights stuff? Can I connect my Apple Watch for the heart rate?
@TheSweetCyclists 2 жыл бұрын
No, I believe the Garmin units have the same capability with more features. The RIDEtime is actually a pretty basic computer, Bontrager just added a lot of nice features to it. As far as Apple Watch connectivity it would depend on your heart rate monitor. Many of them are Bluetooth so you might be able to connect to an app + computer at same time - I would check with heart rate monitor specs.
@debbiestubbs3537 4 жыл бұрын
I did not set the Auto Clear function to ON becasue i prefer to manually clear my data. I have held the front button while in a Ride Mode screen (Timer and Distance) and the Clear Data screen comes up and I select Yes and then hold the Front Button down but then it goes to Night Mode screen and the data doesn't clear. What is the correct way to manually clear the data from a ride? Thanks.
@TheSweetCyclists 4 жыл бұрын
Debbie, I think what you are doing wrong is continuing to hold the front button down after the clear data screen is shown. Just hold the front button for the ~5 seconds until the 'clear data' screen shows, let go. Toggle the yes/no to what you want, and then press the rear button to confirm. The rear button is a bit awkward to reach.
@debbiestubbs3537 4 жыл бұрын
@@TheSweetCyclists Thanks that worked and it wasn't clear in the manual. So whenever there is a "response" to a question on the screen, the rear button enters the response?
@TheSweetCyclists 4 жыл бұрын
That's correct. The rear button is the 'confirmation' while the front button is more of a 'toggle.' You shouldn't have to use the rear button too often after you've done the setup - unless you want to clear data or turn on the back light. It's one of the less user-friendly aspects of the RIDEtime computer.
@littleeddie133 2 жыл бұрын
Can you pair this with Apple Watch so it will record your distance?
@TheSweetCyclists 2 жыл бұрын
No. The RIDEtime Elite does not support any blue tooth connection or external connections. The computer keeps track of total odometer distance so you can keep track of your overall mileage.
@vales74 4 жыл бұрын
heyyy bro! that computer its compatible with ion pro lights? thaks 4 review 👌🏼
@TheSweetCyclists 4 жыл бұрын
Yes, it should be. Any of the RT bike lights with the bluetooth/Ant+ connectivity enabled should sync up.
@Bmanhp Жыл бұрын
If the battery dies or you remove it, does it clear the odometer or other stats like max/avg. speed? Settings like wheel size?
@TheSweetCyclists Жыл бұрын
That's a good question. I haven't tried that myself to see if there is some sort of internal memory. Many devices have some sort of backup or long-term memory that shouldn't clear if the battery dies.
@Bmanhp Жыл бұрын
@@TheSweetCyclists Thanks, that's what I'm looking for but it's often not mentioned in the specs or features. I've had too many cheaper cycling computers with dead batteries erase everything, plus it can be tricky to set up again a year or two later if you happen to lose the manual in that time.
@YouTubehatesconservativespeech 3 жыл бұрын
How do you remove the computer once you need to change the battery? I've pulled and pressed it will not come off.
@TheSweetCyclists 3 жыл бұрын
You should see a little cutout on the battery cover. I used a coin to twist it to the unlock position and then anything small like a toothpick to pop it off.
@arthurjohnson2672 4 жыл бұрын
Great review! I have a question for you. When pairing your Ridetime Elite is the speed and cadence considered one pairing? Because on the video it looks like that and that whats happening with me but I went for my first ride today and the cadence did not work. Any suggestions? Thanks
@TheSweetCyclists 4 жыл бұрын
Glad it could help. If you watch 05:33, you can see there is an option to pair each sensor separately (speed/cadence/heart rate/power) or all at the same time. I used 'all' and it picked up both without an issue. It's also easy to see which sensors paired by looking at the icons on the top left of the screen. The speed/cadence show up as different icons, if you don't see both you may need to do the pairing again.
@julianrojo1371 4 жыл бұрын
I had the same problem, I moved the sensor closer to the cadence band and it started working:)
@timkerwin6886 3 жыл бұрын
before you set up your device; you showed another mounting bracket which looks like you can put a garmin gps on it. Where do I buy that; since I already own a garmin gps which has the round mount on it. Thanks
@TheSweetCyclists 3 жыл бұрын
You might be referring to the Magicshine TTA mount (briefly shown during Bryton mount review - kzfaq.info/get/bejne/rbl8kph61pOUoX0.html)? It's what is called a 'out front' or 'out in front' mount and is a really nice mount to have. Highly recommend getting a dual sided one like the Magicshine TTA so you can put the computer on top and a light below it. The big downside of the Bontrager computer is that they didn't use the Garmin style mount for some reason.
@timkerwin6886 3 жыл бұрын
@@TheSweetCyclists I have a garmin gps but my mount broke when I had my bike accident in September
@bmsamson 2 жыл бұрын
I just bought and installed one of these. I thought I'd set it up with dual lower display, but all I see is Odometer (speed is in main); I don't see cadence. how to make this work? will it stay on any setting that I manage to create, or go back to some sort of default?
@TheSweetCyclists 2 жыл бұрын
The computer has internal memory, so it should retain any changes you made to the bottom display. Are you sure your cadence sensor is connected and has a good battery? If a sensor is disabled / not connected, the computer won't show that data field even if you have it configured to show.
@bmsamson 2 жыл бұрын
@@TheSweetCyclists Thanks. I figured out that I just needed to tap the front button to cycle through bottom of display options and cadence came up, worked fine after I adjusted a bit to get it closer to the cranks. Now I need to reset which two are showing, as I inadvertently doubled up on speed which is my primary (top) so not needed below.....
@driftjzx90 4 жыл бұрын
Thank you for the great review. I have one question. Does the EL backlight turn on all time when running night time mode? Or does it work only certain seconds when you press button each time? I am expecting all time and I assume it is, but wanna make sure before I purchase. Thanks in advance!
@TheSweetCyclists 4 жыл бұрын
Glad it could be helpful. The backlight only stays on for a few seconds after you press a button with the backlight enabled. As you can see in the video, enabling/disabling the backlight is also not very intuitive as you have to do a long hold.
@driftjzx90 4 жыл бұрын
The Sweet Cyclists Thank you for your kind reply. I see, it lights up for only a few seconds... I often ride in a night time so I thought that Cons. could be negligible for myself. Need consideration before purchase. Thanks!
@TheSweetCyclists 4 жыл бұрын
Running the backlight for a full ride will definitely drain the battery though, so be careful about that. I'd recommend the Bryton Rider 320 GPS (kzfaq.info/get/bejne/mrFzopmbtZbbl3k.html) which does have a backlight that stays on -as well as a dedicated on/off button.
@harrybryson1130 4 жыл бұрын
Would it be secure enough for mountain biking? Also, is the computer robust?
@TheSweetCyclists 4 жыл бұрын
I haven't tried it off road, but the mount is very secure and computer feel well made. It doesn't have any play or jitter so I expect it would work well off road. Unfortunately, the computer doesn't use a Garmin quarter-turn style mount so you have to use the supplied mount or the Blendr attachment (www.trekbikes.com/us/en_US/equipment/cycling-components/blendr-integration/comp-blendr-stem-and-blendr-accessories/bontrager-blendr-ridetime-mount/p/22250/?colorCode=black).
@harrybryson1130 4 жыл бұрын
The Sweet Cyclists thanks!
@suadmahmutovic6542 3 жыл бұрын
Do you know if this will contact to Wahoo speed and candace sensors since they are Ant+ or what would be considered compatible sensors? Thank you!
@TheSweetCyclists 3 жыл бұрын
As long as they use similar connectivity versions - it should be. I'd recommend reaching out to Bontrager support with the exact model info of the sensors to confirm though.
@isurubenaragama4942 3 жыл бұрын
It is.
@WINGSONWHEELS 4 жыл бұрын
Hi, I am planning for a Trek FX 2 2020. Can you please tell me what all should I buy as I want heart reading, cadence reading and speed reading and also the map logging. I tried to search alot but can hoh please tell me
@TheSweetCyclists 4 жыл бұрын
Absolutely. With the RIDEtime Elite you can get all the all the sensor readings, but it does not have mapping or GPS functionality. If you want mapping functions, GPS and the ability to upload to Strava or other platforms I would look at Bryton / Wahoo or Garmin computers. They have bundles that include speed / heart rate sensors with the computers.
@michaelrawson4808 2 жыл бұрын
Good review but, No clear instructions on wheel size CUSTOM MODE my wheel is a 27 1/4" Ignore!! I've watched the video again and have sorted out my long push and short push. Up and running thanks.
@TheSweetCyclists 2 жыл бұрын
You need to find the wheel circumference in mm. The best way to do that is just mark a spot on the wheel and ground, then move the bike in a straight line until the same spot on wheel touches the ground again - that distance is the circumference of your wheel/tire combination.
@michaelrawson4808 2 жыл бұрын
@@TheSweetCyclists Thank you. I have sorted out the circumference, exactly as you describe. For some reason I was failing find CUSTOM in the wheel size options. All sorted now and works a treat.
@kendallcampbell8539 3 жыл бұрын
Great Video
@johndoe-lr9qc 3 жыл бұрын
Hi thanks for this review,you mentioned this came with straps. Can this be used to fit the mount on my flat aero style handlebar. Thanks
@TheSweetCyclists 3 жыл бұрын
The computer only comes with rubber pads for the out front mount. It will only work on rounds handle unfortunately. However, unless you have one-piece aero bars you should still have a little round tube near the stem attachment to mount this computer. Otherwise I'd recommend getting a cycling computer with a Garmin mount (Cycplus M1 is a decent cheap $50 GPS option kzfaq.info/get/bejne/pKx9ZdFkrcitm2Q.html) as there are a lot of Garmin mount options for aero bars.
@johndoe-lr9qc 3 жыл бұрын
@@TheSweetCyclists yes I have one piece bars. Thank you for your help! Threw you a sub.
@TheSweetCyclists 3 жыл бұрын
Thanks, glad we could help. There are a lot of Garmin mount compatible 'center mounts' (like the www.topeak.com/us/en/products/254-RideCase--Panocomputer-Mount/1321-COCKPIT-CENTER-MOUNT) designed for one-piece handlebars to choose from.
@druna4721 4 жыл бұрын
I bought this though it doesn’t pick up the speed sensor. Anyone else have this issue?
@TheSweetCyclists 4 жыл бұрын
I would check if you are using a compatible sensor. Also, spinning the wheels a few times while the computer is searching for the sensors should help pick it up. We are using Bontrager's interchangeable sensor in the video and it worked well. You just need to dial in the position of the magnet to make sure it reads. There is a small LED on it that will flash if you have everything aligned properly (see the user manual),
@rubglez 4 жыл бұрын
Is this computer compatible with multiple duo trap sensor. I have the dui trap sensor in two different bikes
@TheSweetCyclists 4 жыл бұрын
That's a good question. The RIDEtime doesn't have bike profiles, like you'll find on some computers that let you easily switch between bikes. I think you'd have to re-pair the sensors if you want to use it on different bikes.
@stanisawczeszak3415 3 жыл бұрын
hello, I bought this. I put battery and doesn't start up. I put another battery and anything happen. How can start up?
@TheSweetCyclists 3 жыл бұрын
Are you sure you removed the plastic tab covering the battery terminal? Otherwise you might have a bad computer, it should always be on - there is no "power button" on it.
@stanisawczeszak3415 3 жыл бұрын
@@TheSweetCyclists yes, it was broken.
@sucito11 4 жыл бұрын
Thanks a lot for the review. My question is: Does the speed sensor comes included in the box ? Or I have to buy all the sensors separately? Thanks
@TheSweetCyclists 4 жыл бұрын
The version in the review does not include sensors. Bontrager sells a separate interchangeable sensor, which I bought at an LBS for $69.99 (costs as much as the computer!). They also offer a DuoTap version, if you have the compatible Trek bike, bundle for $129.99. You can use third-party sensors, as long as they are compatible.
@beasted2637 Жыл бұрын
I just bought one but I didn't realize it's pretty much unusable without a Kaden senser
@TheSweetCyclists Жыл бұрын
Why is that? You don't need a cadence sensor to use it - it can use the GPS signal for speed / distance / gradient / altitude metrics. Cadence is just a nice extra metric I'd recommend - but it isn't required.
@beasted2637 Жыл бұрын
@@TheSweetCyclists idk My bike shop here said it'll work fine but I took it on a ride for an hr and it didn't track my mileage. Speed. And the timer would not start and idk if I have to do that manually but I set it to automatic.
@TheSweetCyclists Жыл бұрын
@@beasted2637 Sorry you're right - this is a non GPS computer so you need a speed sensor for speed /distance and at least some sort of sensor connected for ride time (even a cadence or power meter). The computer is otherwise very easy - it has auto-start feature so there is no record button to press. You cannot export the ride information though or upload it to Strava. I'd recommend a GPS computer like the Bryton Rider 15 Neo which utilize GPS signal and track your full ride data.
@beasted2637 Жыл бұрын
@@TheSweetCyclists I just wanted something that was cheap because money is really tight rn I thought this would be a great choice lol but now I got to get another sensor that costs just about as much as I paid for the device itself. Lol. Thank you for letting me know! At least I'll always know what time I'm riding at for now🤣🤣
@TheSweetCyclists Жыл бұрын
@@beasted2637 Note, you don't have to buy a Bontrager speed/cadence sensor. You can get any number of cheaper CYCPLUS / Bryton sensors - it's all interchangeable with newer Bluetooth / Ant+ sensors.
@henzbikertv916 4 жыл бұрын
Hi, Does the bontrager ion taillight also be controlled wih this computer? Or comes on automatically when riding just like the front bontrager 200 light? Thanks
@TheSweetCyclists 4 жыл бұрын
Yes, both the Ion 200 RT and Flare RT can be synced to this computer, sorry for not showing the taillight in the video. The computer will automatically turn them on/off and even change light output mode between day/nigh when the backlight is turned on/off. You can't see the battery status with this model computer, but it will show you a 'low battery status'.
@genarosoria8894 4 жыл бұрын
Can I set this computer to just read my avg power as one big number on the screen ?
@TheSweetCyclists 4 жыл бұрын
Yes/no. The screen configuration options do not have a single number display mode there are only two options: (1) big number on top + dual smaller numbers on bottom, (2) big number on top + a single smaller number on bottom. You can show power as the top number (or speed/heart rate/cadence). I assume the real-time power will be averaged over some interval, but I don't think you can configure the averaging window.
@genarosoria8894 4 жыл бұрын
Thank you. This should work. I think that this computer is perfect to pair with my Garmin Fenix watch. I like keeping the watch on my wrist and plan on recording with it. I just want to watch my avg. power data on certain training rides... I will likely broadcast my hr from watch to head unit if it allows...(super expensive heartrate monitor) LOL
@JohnKMagic 3 жыл бұрын
I'm wondering if there's no sensor included in the package ?
@TheSweetCyclists 3 жыл бұрын
That's correct, you need to buy sensors separately. Bontrager does offer a package deal with the RIDEtime + DUO Trap sensor if you have a Trek bike. We ended up buying Bontrager Interchange Digital Combo Sensor ($69.99 - www.trekbikes.com/us/en_US/equipment/bike-accessories/bike-computers-gps/bike-computer-sensors-accessories/bontrager-interchange-digital-combo-sensor/p/11323/?colorCode=black) but there are much more affordable options available from third party companies.
@roy153211 3 жыл бұрын
Hey, I suspect the device can only sync with Bontrager lights, but do you know if it can pair with other brands such as the Giant lamp?
@TheSweetCyclists 3 жыл бұрын
You would need to check with Bontrager customer support - but I would be surprised if other lights were compatible. As far as I know, on the Bontrager RT lights work.
@fvenezian 4 жыл бұрын
I just got one but it’s not the elite version. I can’t make it to sync with the sensor. I went to the shop today and they replaced to a new one but same thing. The icon on the top left corner won’t show up. Changed the battery on the sensor and the manual doesn’t say anything about connecting it to the sensor. Very frustrating. Any ideas ?
@TheSweetCyclists 4 жыл бұрын
Couple things could be the issue: are you using compatible sensors, and were you in the pairing mode? Not sure if the non-elite version is different, but if you watch the video 05:27 of the video you need to enter the pairing mode of the computer. While it was in pairing mode, I also rotated the crank to ensure the speed/cadence sensor would transmit a signal.
@fvenezian 4 жыл бұрын
The Sweet Cyclists. Hi there, the sensor is the original one that came in the box. The only option is scan and I’ve done it many times. I even did spin the wheels for a while to see if it would detect. I even moved the sensor and the magnet few mm up and down, put the computer close to the sensor but it never found the sensor. I will just return it again tomorrow and get something else instead :)
@lotteaalsma638 3 жыл бұрын
@@fvenezian Hey Fabio, Im having the same problem. How did you end up getting it fixed?
@fvenezian 3 жыл бұрын
@@lotteaalsma638 i was never able to fix and ended up returning it
@lotteaalsma638 3 жыл бұрын
@@fvenezian thanks for the reply! Spoke to customer service today and I think I will have to do the same
@marilynhuyck5521 2 ай бұрын
How do I turn off my Ridetime computer?
@TheSweetCyclists 2 ай бұрын
You don't turn it off - it automatically goes to sleep. It's a little weird, but with the internal watch battery and simple user interface the battery save mode works well.
@nmonsalvem 3 жыл бұрын
How did you install the computer mount? It's made of a very hard plastic that I can't open to fit the handlebar, otherwise it could break. I tried to remove the brakes so I could slide the mount from the sides but I can't remove the brakes. Manual doesn't show that process :(
@TheSweetCyclists 3 жыл бұрын
I didn't have any issues with installing the mount, you just have to slide it over the handlebar. Maybe you're using the wrong shims with it? Per the manual: (A) thin shim with a 31.8mm handlebar, (B) thick shim with a 25.4 or 26.0mm handlebar, (C) no shims with a 35mm handlebar or (D) both shims with a 22.2mm handlebar. No need to remove brakes or other items, it should just slide onto the bars with a little bit of force. Note Bontrager does also offer a Blendr stem attachment option - www.trekbikes.com/us/en_US/equipment/cycling-components/blendr-integration/comp-blendr-stem-and-blendr-accessories/bontrager-blendr-ridetime-mount/p/22250/.
@nmonsalvem 3 жыл бұрын
@@TheSweetCyclists It's for a mountain bike. I think the mount was not made for a mountain bike. Thanks for the link. I'll see if that option works.
@TheSweetCyclists 3 жыл бұрын
I would double check your handlebar diameter, even mountain bikes shouldn't be more than 31.8mm. The Blendr mount is a good option though, it's a cleaner installation. Mounting issues like this are why I wish Bontrager had gone with a Garmin mount though, you wouldn't have to buy proprietary Blendr mounts.
@nmonsalvem 3 жыл бұрын
@@TheSweetCyclists Actually it's not about the diameter of the bars but about how to make the computer mount slip through the bar because the brakes are blocking the handle bars. I wish I could show you a picture.
@TheSweetCyclists 3 жыл бұрын
Ah I understand now - the wires and levers are in the way. I'd definitely recommend the Blendr stem mount then. The only other option that could work is a 'handlebar extender' something like www.walmart.com/ip/MarinaVida-MTB-Bike-Handlebar-Extension-Holder-Bicycle-Handle-Bar-Bracket-Extender-Mount/770386238 assuming that would fit.
@theinstigatorr 3 жыл бұрын
Is this the lightest power meter that displays power?
@TheSweetCyclists 3 жыл бұрын
If you're asking if this is the lightest computer with power display, I'm not sure but it is definitely on the lighter side with it's non GPS design.
@szaka9395 4 жыл бұрын
Nice instalation while you got your mounting stuff already on the bike xD
@geopatriarca2820 3 жыл бұрын
You really needed instruction for that?! WTF?!!!!!!
@russelljohnson47 2 жыл бұрын
How do you set correct time?
@TheSweetCyclists 2 жыл бұрын
There is a "clock" setting in the setup menu. (1) Press the rear button to enter setup (2) Press rear button 4 times to enter "clock mode" (3) Use the bottom button to increment the hour/minutes
@oterosocram25 Жыл бұрын
How is it tracking speed if you are not moving?
@TheSweetCyclists Жыл бұрын
You can sometimes see some noise from the GPS data inside buildings which results in 0-1 mph speed being displayed even when you're stopped. It's not really noticeable when you're on the road with good GPS reception.
@oterosocram25 Жыл бұрын
@@TheSweetCyclists ok, but is it connected to another device tracking the speed of the wheel or something? I’m a little confuse sorry
@TheSweetCyclists Жыл бұрын
@@oterosocram25 No, the speed is based on a wireless GPS signal. I don't have a speed sensor connected in this review - you can use one for more accurate speed (and it won't cutout in tunnels or dense forests). Inside buildings the GPS signal can be noisy which sometimes shows very slow speeds on the display when not moving.
@AsaadSaleh 4 жыл бұрын
Thanks for the review. I am not abke to get to the pair sensors screen when i long press the back button it starts the configuration again. Any idea.
@TheSweetCyclists 4 жыл бұрын
It sounds like you aren't following the right steps - the two button interface is a bit confusing (remember back button is to confirm, front button is to cycle through options). If you follow along with the video at 05:26: (1) hold back button until config menu is shown and then release, (2) press front button to pick 'YES' and then (3) press and release back button to confirm. After that you have option to pair all sensors or just a specific one.
@charlesfriede3779 2 жыл бұрын
I am also not able to get to the Pair Sensors screen. It's not helpful to tell me "I am not following the right steps/" (a bit condescending, actually. and I KNOW that I'm not following the right steps. If I was, the damn thing would work.) I have looked at the 5:26 section multiple times. I can't see what you are seeing. This is my first bike computer. Why not try to make your instructions super clear, and show people what you are doing, what simultaneously describing it to them?
@jflivingston 2 жыл бұрын
@@charlesfriede3779 My, my, we have quite an attitude don't we? I have never seen a clearer video nor more thoughtful answers from any producer on this platform. Are you entitled to something more?
@thomasskernivitz4812 2 жыл бұрын
@@TheSweetCyclists I'm not going to be as harsh as Charles Friede, but he is correct, as is ACEaleh. When you hold the rear button, it does start the configuration again. In your video, on the the computer interface it goes from sensor not being connected to sensor being connected. There is no explanation how that occurred. It seems as if you started the video already connected. That's great ... but we are not connected. That is our problem. Actually, our problem is that the directions that came with the product don't address connecting the sensor or "scanning" at all. That's why we're here. Any additional direction would be appreciated, thank you.
@TheSweetCyclists 2 жыл бұрын
@@thomasskernivitz4812 Sorry for the confusion I didn't see the response to my initial response. (ENTER PAIRING SCREEN) 1. Hold the rear button for a few seconds until you see "Pair Sensor" label (SELECT YES) 2. Use top button until you see "YES" flashing 3. Press rear button to confirm (SELECT SENSOR) 4. Leave it on "ALL" - this searches for cadence / power / heartrate all at once OR press top button until you see specific sensor you want to pair (START PAIRING) 5. Press rear button - screen should say "Searching" now ... now just wait until it finds the sensor or times out. For cadence or power sensor I recommend spinning wheels to ensure they are sending data. Hopefully those instructions help! Instruction manual is definitely confusing, as it doesn't explain how to even enter the pairing mode.
@hbone06 4 жыл бұрын
awesome review
@abrahamviramontes6867 2 жыл бұрын
Is it possible to conect to Strava?
@TheSweetCyclists 2 жыл бұрын
No. The RIDEtime does not store ride data so you can't review rides or upload them.
@ericzhu3708 2 жыл бұрын
How do you change something?
@TheSweetCyclists 2 жыл бұрын
What are you trying to change specifically? There is a configuration menu that lets you change a lot of setting such as time / sensors and data displays. Everything is done via the computer itself, there is no cellphone app.
@ericzhu3708 2 жыл бұрын
@@TheSweetCyclists Like maybe the time or my age
@JitinMisra 2 жыл бұрын
does this computer let you see , you heart rate, power, cadence and speed and time lapsed all in one view ?
@TheSweetCyclists 2 жыл бұрын
No, the display isn't large enough for that. You can cycle through them or view 2 at a time.
@JitinMisra 2 жыл бұрын
@@TheSweetCyclists darn, i would have bought it, if i could see it all in one view.
@TheSweetCyclists 2 жыл бұрын
@@JitinMisra I'd recommend a larger GPS computer. Something like the CYCPLUS M2 or more configurable GPS computers like the Bryton Rider 320 / S500.
@JitinMisra 2 жыл бұрын
@@TheSweetCyclists yea, i'm debating getting those with the speed and cadence sensor or go wahoo element bolt for twice cost, but i'd be future proof.
@JitinMisra 2 жыл бұрын
@@TheSweetCyclists which speed and cadence sensor do you recommend?
@jljuliano1 4 жыл бұрын
just watched your vid. I'm finding it hard to believe TREK replace my node2.1 with this thing. I have custom wheel size which I need for 700x26- clock, speed, cadence, time, ride time all on the display, yes then can scroll to altitude, grade. Well, you get point. I can turn my own lights on an off. I'm glad I watched this vid I was about to pick one up. again, disappointing, however I must thank you for the vid. PEACE...BLM
@ericzhu3708 2 жыл бұрын
What do you mean by sensors?
@TheSweetCyclists 2 жыл бұрын
You can connect sensors such as a speed (for more accurate speed / distance calculations), cadence (measures the rotation speed of your crank), heart rate and power (how much power you're putting through the cranks) for additional data metrics which are useful for training or measuring your performance. The extra sensors are optional though, the built-in GPS sensor will give you speed / distance / altitude automatically.
@thanhkhuu4167 2 жыл бұрын
How accurately does it compare to iGPS 320?
@TheSweetCyclists 2 жыл бұрын
Good question, we are working on a review of the IGS320 computer right now. The IGS320 is a GPS computer so you can actually upload rides to Strava or other website - while the Bontrager does NOT store ride information. Otherwise, we think the IGS320 is a good entry-level cycling computer - it just lacks customization and power meter connectivity.
@thanhkhuu4167 2 жыл бұрын
@@TheSweetCyclists Hope to see your video soon. Many thanks :)
@thanhkhuu4167 2 жыл бұрын
@@TheSweetCyclists Can I combine IGS320 + Bontrager duotrap s censor? How do you think?
@SilvenSan Жыл бұрын
i have basic, non elite. how to fxking turn it off xD
@TheSweetCyclists Жыл бұрын
I don't think there is a power on / off button... the computer simply goes to sleep if you stop moving for an extended period of time. If you plan on parking the bike for an extended amount of time you can remove the battery from the computer.
@joey3908 4 жыл бұрын
How do you turn it off
@TheSweetCyclists 4 жыл бұрын
You don't turn it off, it's a bit strange right? It will timeout after 10 minutes and just show the time in the bottom right corner.
@davidvognild 10 ай бұрын
Ours never paired
@TheSweetCyclists 10 ай бұрын
Which sensors are you having trouble with? As long as the sensors are compatible (almost all modern ones should work), have a good battery and pairing mode is active you should be able to connect the sensors to the head unit.
@Elvis68spec 2 жыл бұрын
That looks very complicated!
@TheSweetCyclists 2 жыл бұрын
Yes, the two button interface is fairly complicated to use as each button is overloaded with multiple actions. If you're looking for something simple the CYCPLUS G1 is a good option (does not connect to sensors though) or the Bryton Rider GPS computers are a good option (they lack the Bontrager light connectivity).
@williamjeffreys2980 11 ай бұрын
The instructions in the box are absolutely pathetic.
@jamesambrocio 3 жыл бұрын
I think they were really high when they designed this overpriced tech.
@isurubenaragama4942 3 жыл бұрын
It seems a good product broo. Believe me bontrager is very durable always. Im using bontrager with my trek bike. Very durable. Strong.
@TheSweetCyclists 3 жыл бұрын
It's not the most affordable GPS on the market (check back in a few weeks for our review of the $50 CYCPLUS M1 GPS computer), but the RIDETime has great configurability and connectivity options. It's also probably the cheapest GPS that works with Bontrager's lights (Flare RT / Ion RT) which allows the computer to turn the on/off automatically.
@kgw3636 11 ай бұрын
Its a poorly designed piece of crap
What the Meowk!
Рет қаралды 9 МЛН
James Lester Baldwin
Рет қаралды 34 М.
The Sweet Cyclists
Рет қаралды 111 М.
Cycling Weekly
Рет қаралды 235 М.