Connect the car jack to the table, and you will be surprised by this idea !

Рет қаралды 373,594

24 күн бұрын

Hi friend. I made a great video for you in which I used a car jack. I have turned it into a very useful mechanism that may be useful to you!
Friends, my name is Vanya! I am the author of the channel HandCraft.
On this channel I present everything that I have done with my own hands.
Creative ideas, useful tips !
We turn simple things into unique ones! Subscribe, it will be interesting! #craft #wood #diy

Пікірлер: 113

@hand_craft 22 күн бұрын

Hi, I hope you liked this mechanism) Rate from 1 to 10

@beaverworks1969 22 күн бұрын

Ten points 👍

@HillbillyJim72 22 күн бұрын

I see it as a 10 !

@kevinjohnson2528 22 күн бұрын

Definitely a 10 from me

@pereezd_na_Kuban_emi_immigrant 22 күн бұрын

@pauluspriems4442 22 күн бұрын

Very nice. 10

@S.Acosta-yg6od 19 күн бұрын

Wow, curiously, for at least 15 years I've been thinking about doing something similar for my use, not with wood, but i do more things with metal, but was never been able to figure out the way to do it, and now you've shown me how to do it.. thank you very much.. that's a super great idea..

@KTPDAILY 4 күн бұрын

It's been two weeks since you're coming so have you started?

@tenncutt 20 күн бұрын

Thought I was going to die of old age before I figured out what you were doing! I was impressed in the end!

@Lutzboater 22 күн бұрын

Very unique and a very nice cart. I'm sure the kids enjoyed riding around on it.

@TopCat2021 22 күн бұрын

I'll give it a 10 Genius!

@hand_craft 22 күн бұрын

Thank you for such a high assessment! I am very glad that you liked it)

@mygarden365 21 күн бұрын

This content, is great work. Very worthwhile.

@andrewjones-productions 22 күн бұрын

That's very clever! You deserve 11 out of 10 for that!! To be honest with you, I think that if you mass produced that table, it would very likely sell! As you demonstrated, it is operable with a load on it. I would love something like this (a variation of your design) that is a storage frame/box that allows me to load fully laden box/frame onto a trailer (or van) without any lifting whatsoever.

@RPO6464 20 күн бұрын

Very cool work bench. I definitely give it a 10. Good job!

@beaverworks1969 22 күн бұрын

I really liked the idea! Of such systems made on KZfaq, this one is one of the best 👍 Continue on

@paulpalomo417 22 күн бұрын

10 👍. Fun project to watch as well!

@onjofilms 22 күн бұрын

Cool. I think I'll use that jack to create a scissor lifting table.

@qwe1231923 21 күн бұрын

Thenk you man

@SilasLennonJr 22 күн бұрын

Wonderful addition!!! 10 ⭐ Rating!

@hand_craft 22 күн бұрын

I am very glad that you liked it! Thank you for such a high assessment👍

@CoolIdeasDIY-qv1nz 21 күн бұрын

Great job, man👍

@user-ff6ju6hg4u 5 күн бұрын

Nice job I was surprised

@jerryodell1168 22 күн бұрын

Awesome idea. Its a 10.

@hand_craft 22 күн бұрын

Thank you sir for such a high assessment!

@viorsa8200 22 күн бұрын

Ok, fantástico trabajó maestro, gracias por compartirlo.👍🤓😜

@manuelpavan1647 21 күн бұрын

Bellissimo lavoro! come hai mostrato, col tuo meccanismo anche un bambino potrebbe spostare quel banco da lavoro

@DonDomel 22 күн бұрын

absolutely fantastic !

@jeffp5991 5 күн бұрын

I didn't see anything in the video that looked like the image that caught my attention. So yes, I was surprised.

@user-lu8lf7lh8m 21 күн бұрын

Стол с вертикальным взлётом))

@MarkEichelberger-cw6cb 22 күн бұрын

That's an awesome table set up...I need one adjustable in height...18 inches of travel... can support and raise/ lower 1500 pounds... and is 12v powered ... and either end independent raise/lower from the other

@alsnyder1660 22 күн бұрын

It's a 10 for me. And I'm immediately impressed... you seem to have cut the shaft off at a nice 90 degrees. I can't cut or drill at 90 degrees even if my life depended on it.

@mariodelmanso9345 22 күн бұрын

Geniale e semplice da realizzare: complimenti!!👍👍

@terrybrower3437 10 күн бұрын

Great video. Clever engineering.

@maobfh 21 күн бұрын

Really smart!! I would give it a 99/100

@bobh3394 16 күн бұрын

Great idea and plan!

@AndrewPinkFloyd 21 күн бұрын

Genius! 10/10

@ussling 11 күн бұрын

Brilliant execution. Put blue thread lock on the bolts or replace with longer bolts. In military aviation, a minimum of three threads showing after the nut was tightened was mandatory.

@traceyluck8722 22 күн бұрын

10 could you post where you ordered the Jack from, I don’t think we have that kind in the US, thanks and great job and idea.

@stevetaylor5269 22 күн бұрын

That's a standard Mercedes jack, go to any wreckers

@MachineEarth 18 күн бұрын

Trailer tongue jack.

@Majorkooldad 19 күн бұрын

Nice cart, Well thought out! a 10 for creativeness and usability :🙂

@fred-san 22 күн бұрын

9 rolls near soil price ?

@matthewwalker7024 21 күн бұрын

Not an idea I've seen before. Great job 10

@MrNovruz 20 күн бұрын

Hi friend

@cebithwala4161 20 күн бұрын

I am giving it a 10/10 brilliant 👏 idea 😃

@fav6587 6 күн бұрын

Very nice

@georgechalifoux4668 14 күн бұрын

That’s awesome👍🏻👍🏻👍🏻👍🏻

@123232ism 21 күн бұрын

Brilliant....10. Excellent video work too.

@bradleytuckwell4881 22 күн бұрын

What a great idea

@ron827 22 күн бұрын

An over center foot operated lift would be much simpler.

@foxwhiskey 20 күн бұрын

Of course a 10 !! Great job and a really useful idea ! 😊

@MCsCreations 22 күн бұрын

Amazing work, dude! That's just brilliant! 😃 Stay safe there with your family! 🖖😊

@tielkgate 19 күн бұрын

Nice!🤩 Lowell

@JohnJohnsTinShedSnyman 20 күн бұрын

10/10......awesome idea

@mrgodBG 21 күн бұрын

great idea! until last min i was like wtf is he building??? 😂👌

@user-jb7lv1qs5m 19 күн бұрын

Это можно сделать с помощью двух рычагов.Если посложнее-одним. И не портить домкрат.

@lonpowley 20 күн бұрын

10/10 cool project.

@ClassicSteelRC 21 күн бұрын

Awesome video and a 10 on the table!!! 👏👏👏

@5774222 20 күн бұрын

Супер идея 👍

@USMC1984 21 күн бұрын

9.5 lol. It would have been better if it were a metal table! ( from a welder…lol). It’s a great idea, this could very easily be incorporated on to a vice stand or movable welding table.

@jamesgiovagnoli7754 18 күн бұрын

Nice modification, but it's not really a feature of the jack if you change its structure so much.

@MachineEarth 18 күн бұрын

It's very nice, but couldn't you use a locking lever to do that?

@jamesalmsr.7493 21 күн бұрын

10+ great work

@musiquepourmoi11 22 күн бұрын

Très bien: 10

@user-px7zf9tr4y 21 күн бұрын

Хорошая идея для станков в мастерской

@shallowgrave2642 20 күн бұрын

Если у вас валяется в ведре домкрат колëса, болты и гайки, фанера и клей. То да хорошая идея. А так это, чугунный мост.

@user-px7zf9tr4y 20 күн бұрын

@@shallowgrave2642 в столярной мастерской всегда не хватает места. Возможность перемещать станки очень хороша.

@PaulJones4968 18 күн бұрын

Nice video, but adding 2 rolling casters and 2 locking casters wouldve sufficed

@mikeelwood8626 22 күн бұрын

Solid 8!

@marcoaureliobarbiero80 21 күн бұрын

very good!

@the250mikec 21 күн бұрын

9👍👍👍👍👍

@user-xl2ls2cm3m 21 күн бұрын

в поддержку канала 🤔

@mikebarrett3428 21 күн бұрын

Sweet!

@moisesgomez5593 22 күн бұрын

Me gustó mucho el sistema es muy original, pero no logre entender el mecanismo

@markduggan3451 22 күн бұрын

Cool.

@soundlydiy 22 күн бұрын

Cool ❤

@MrDan7171 18 күн бұрын

Very ingenious idea but also very overly complicated for its use. There are much easier ways to accomplish this, i have a table that uses a simple pull lever to to do the same thing and is a much simpler process to build.

@h4z4rd42 22 күн бұрын

10! That's a LADA jack, right?

@Fant01 2 күн бұрын

L’idée est bonne, mais trop compliqué et coûteux pour rien. Bravo quand même…

@user-xl2ls2cm3m 21 күн бұрын

залипательно 👌👌👌👌👍👍👍👍😅😅😅😅

@dreamkiss4u 20 күн бұрын

Hmm you know they sell wheel casters that you step on an they lift then step on the small lever next to it an they fold back up , and they don't cost much at all that can do the same thing.... just saying.

@PeterNetped 21 күн бұрын

@billlichirie14 20 күн бұрын

😁👍

@chuckclark9464 22 күн бұрын

👍👍👍👍👍🤜🤛

@AlainStar 22 күн бұрын

🙏👏👍💪

@stuartkorte1642 22 күн бұрын

Yes, 10

@ingokuhn4192 19 күн бұрын

So ein Aufwand für ein Tisch mit Rollen, so kann man auch die Zeit vergeuden 🤦‍♂️

@kriss2787 18 күн бұрын

@ArnostKnecht 21 күн бұрын

😂😂😂 super vozidlo pro deti

@aungsint9058 22 күн бұрын

what it is balls size number??

@adolfocamargojunior6468 5 күн бұрын

Muita engenharia pra nada...

@charlesslack8090 21 күн бұрын

Photo on video cover has nothing to do with the video = 0 Execution of an idea = 8 Practicality of end product = 5 Materials used = 6 Questionable use of plywood for moving parts under stress Cost of materials = 4? Dependent upon longevity of apparatus could be a 1 Video enticement to build one for self = 1 Good luck with your next idea.

@hand_craft 21 күн бұрын

Hello. Thank you for such a detailed assessment of my work. I will correct mistakes and get better)

@charlesslack8090 21 күн бұрын

@@hand_craft Keep in mind that they weren't mistakes, they are all just learning opportunities. 🙂