Ana-digi troubleshoot - Ep 81 - Vintage digital watches

Рет қаралды 7,707

Vintage Digital Watches

Күн бұрын

So if your analog on your ana digi watch is not working here is how to find the issue

Пікірлер: 38

@johanneskepler1032 3 жыл бұрын

Intelligent watch specialist. That's a gift and talent Bro.

@VintageDigitalWatches 3 жыл бұрын

Thank you for the kind comment.

@gshockhighfashion 4 жыл бұрын

Just what I'm looking for. Good timing. Keep up the good work!

@VintageDigitalWatches 4 жыл бұрын

Will do :)

@Kwales66 4 жыл бұрын

Very well explained. Thanks.

@VintageDigitalWatches 4 жыл бұрын

Thank you

@jerrymoore8580 4 жыл бұрын

Great video! Is it possible to fix missing segments on the LCD? The corner of the LCD on my vintage Timex ana/digi is black. Thank you!

@mrcoolr429 4 жыл бұрын

Great video! You can actually check the pulse from the board with a multimeter as well. The oscilloscope isn't necessary but it definitely helps!

@VintageDigitalWatches 4 жыл бұрын

Digital Horology hmmmm, not sure how that works, on what should the multimeter be set?

@mrcoolr429 4 жыл бұрын

When the IC sends a pulse it has a voltage you can detect with the same setting you check your battery voltage. It should spike to about 1v or higher every pulse.

@josemariski 4 жыл бұрын

Hi. Great channel and very illustrative videos. Thank you. Let me ask you a question, please. I have a Seiko C515 that works fine but sometimes when I press the light button the screen freezes. Do you know why this happens? I have some experience other digital watches from Seiko and Casio but this problem is new for me. Regards.

@hsvr 2 жыл бұрын

Can you do some videos on the citizen 8946? I have one that doesn’t work but I’m not sure how to trouble shoot and fix

@marcolimon2521 6 ай бұрын

Hi, I have a ana digi 790404 and the screen are gone a little darker, hard to read, what can be the issue?

@27ukjeff 4 ай бұрын

One problem, you have analogue and digital mixed up Analogue is the MECHANICAL part

@MyRetroWatches 4 жыл бұрын

Brilliant! I need an oscilloscope!

@VintageDigitalWatches 4 жыл бұрын

You MUST get one michael, a good piece of kit, can do more on watches than what you saw in the video.

@DcSnuggles 4 жыл бұрын

Hello, have a couple of broken ESA900.231, which have been used in some high end watches like the Breitling Pluton Jupiter 2100, 2300, 2400 and 2700 or Heuer Carrera Twin Time 371.253, 980.024 and 980.027. The movement has an analog and a digital part with time, date and stop watch. In most cases the digital part is showing crazy numbers, because the movement suffered a short circuit caused during battery battery exchange without gloves. Wondering if you can make a video of that. Further a lot of digital watches have broken of pusher contacts. It would be great, if you could show, how to solder them back on. Also wondering, if you have a shop and if you repair digital watches for a fee. Don't know, how to contact you. Leaving a comment here with the hope you'll respond. Thanks!

@helmuthrendl6560 2 жыл бұрын

Very nice Video but i have a question. When you test the Cyrcle Board like Oszi,is the Battery include in the Board?

@jtr159 Жыл бұрын

Of course.

@muhammedshah4582 Жыл бұрын

Hi This might be long shot but I have a old citizen watch my father used to own. I wanted to service the mechanical side and I can't fro the life of me place the rotor in the center. It keeps getting stuck to the sides with the magnetics. Is there a specific or special tool I'm missing? Thanks in advance

@VintageDigitalWatches Жыл бұрын

I don't use a speciffic tool, aligning brodges to wheel pinions is always frustraiting. I use a micrroscope and a thinned toothpick to gently nudg it around as I place the brodge but no special tool for this.

@Rickybiker 4 жыл бұрын

Can I ask a question I have a Casio sw110 the problem is no display I ac reset and as long as I old it I get perfect display I release and black lcd a few pointers and we’re to start would be great oscillator maybe ?

@VintageDigitalWatches 4 жыл бұрын

ricky n Uh, I never worked on that module before but from your description the module isn't getting power and when you do the AC reste it gets it from there. Check battery connection.

@bidhubhusankayal5966 Жыл бұрын

Sir ...I have a analog digital watch but not running. Can u repair it....its analog parts running few day ago....

@bernab1980 4 жыл бұрын

hi very great videos from you then help me so much to rebird a citizen wingman 8945 but i need your help on analog part becasue after disassembly the analog part for lubricant watch crows after reassembly when i go to set the hour the hand of minute go counterclockwise:-O

@walterwalter3649 4 жыл бұрын

Beautiful video, where can i get that specific coil !?? I have the same board defection coil thanks

@VintageDigitalWatches 4 жыл бұрын

Hi, you should find a donor watch and hope the coil is intact. The speciffic part may exist, you can identiffy the serial number of the part by entrring the watch cali re number in the boley website.

@walterwalter3649 4 жыл бұрын

Thank u very much,