Well if you have so many large machines a Fuel Truck is actually necessary. Otherwise youre busy half the time bringing fuel up that mountain. XD

Yeah, the man has built a massive fleet from the bottom starting with junk! Props to him

@@JackMacLupus You can buy really nice 480 and 990 gallons fuel trailers to haul behind pickups.

Man if I had bought an excavator back when I started following this channel.

I can assure you not every dad is like that not even close.

@@kevinclark6289absolutely. Mine was a prime example of useless cnut.

​@@kevinclark6289- Yuuup, Kevin - sad to say, but you're right !! Always try and spend time with your Dad, when you can !!

not all of them

Totally.

And bend truck door. not cool

Must have lots of money if he treats brand new equipment like that

@@gpcivil8807 don't worry about it buddy

@@SonofChurchill Door's fine quit crying

It s not a Glass 😂 no time to thinking what to do.

too soon

Was the leaf blower to blame here?

@@JeremyWorcester1 uh, no. In the incident that shall go unnamed, I would blame the MessMaker 5000 for the underlying problem.

Along with 2 tonne grass seeder attachment

​​@@Kealdiax and also too late?

I sharted a little. 😂

he should be ha ha

Clearly never seen any of Andrews video's before. I would have let him do whatever he wanted!

The thing got unloaded though.

Just what you needed that thing is wicked@@AndrewCamarata

It’s also why it burnt the machine up he took the cover off that diverts the chips down and away from the machine

@@tonylee997 yeah, I forgot that this is the RIP🔥 excavator. Strange that there was no mention of it. Maybe he waited to release this vid until the insurance check cleared…

@@tonylee997 Pretty sure that's the new excavator that he got

Yeah, this is the burned one. Yellow boom and stick instead of black.

No..this is the one that burned out ....i guss huge amount of saw dust get ducked into that machine thst caused to burn out tragically. ...​@williampankratz600

Hey, Andrew is in another world…, hahaha..!

Andrew is always filming his videos at different times and they come out

cool haha

Yup. 36C here on the Spanish East coast today.

You can tell this is an older video. When he's loading the mulcher head you can see the garage he had fixed up isn't finished.

Hopefully soon will be creating the moat on a giant castle on top of the new mountain.

Or that there's snow in July 😮

He does that from the time he gets it til he uses it a few times. Sometimes a year or more saving multiple videos of content for it. That’s what sets Andrew apart. He’s a great creator

And thats the digger that burnt down.

I love that about Andrew, no 5 parts spread out over a year, just one video for one project

Total disregard for the guys truck. Id be pissed too

@@fit4ya1975he would have fixed it

He was treating the truck about the same way the shipping company treated his mulching head.

I wouldn't be happy if I bought an expensive attachment and they strapped it to a weak pallet....

At least it didn't catch on fire.

Have you verified with a DNA test?

@@tomskimcdouglegaming806what stupid comment

Yep, that’s why I just drove up to Flagstaff where it’s only 89°😂 🥵

Every summer the good people of Phoenix undergo a transformation into human thermometers and start spamming their temperature all over the internet (because it's the only interesting thing about Phoenix 😂)

@@thefrub I agree, Phoenix is boring and waaay too hot. 🥵 😂

@@thefrub I never said I was in Phoenix ... Not in the summer since 2006.. But I do understand ...

just realized that the snow part of the video was from a while ago, not recent. :-)

It does, I set up my tilt bucket to work off that so I can still use the thumb. I am sending this mulcher head back. Its faster to pull the trees out then bring them to firewood/burn piles.

@@AndrewCamarata That's a shame...I run flailmowers/mulchers often at work and its usually way faster to mulch the trees then drive them back and forth and burn them, unless you got a second hand to transport them...then again if you got a second hand, you can run a second cutter lol. I was going to suggest when cutting to cut opposite of the flail mower, i.e. swing to the right when cutting instead of the left, usually cuts way better and faster, also doesn't nearly drag the mulcher into the tree/stump like cutting to the left does, such as at 31:50 . And rocks + mulcher = instant dull/chipped blades. Not worth trying to mulch stumps all the way down to the dirt in your area as a single rock can ruin your teeth if you aren't careful, so it might be better anyways for you to rip them up and back fill the holes I guess. I would say ripping the stumps up might cause erosion issues on those slopes, but you got plenty of rock to go around so it probably won't be an issue for you. Been watching your videos since the "replacing the mounts on a bulldozer blade" video, love your videos and hope to see many more in the future!

Seemed like pretty lousy packaging: partly crushed pallet on top of fully crushed pallet, not much strapping....

They are ready for adventure.

@@AndrewCamarata and deer legs.

​@@eggsaladsandwhiches where do they keep finding them???

Open door Unleash the hounds .

@@AndrewCamarata I cannot believe how all three dogs you have had love to run extreme amounts. You know how to pick them

Ok. Thanks

@@JimboCT1953 thanks.

At the start of the year, he shared the design for the Castle 2.0, that was going up there I believe.

That fire was started by a busted fuel line not a few wood chips

@@Christoph-sd3zi fuel soaked the chips and that's dangerous. Without Chips, it will be almost nothing I believe

Well he did take the diverters off. 😂

shows you how selfish he is....and does not care about any other peoples equipment...just damages it....the driver is on the hook for that stuff...true dillhole...

Yes he even mentioned in that video there were a few wood chips down where the fire started.

I watched that video.

​@benkpsnyder it was a good one.

​@joshb8302 if you believe a few wood chips started that machine on fire I have some swampland in FL to sell you

And the new one has a dozer blade as well.

That's the old excavator. He's since replaced it with a brand-new one.

@@dvandkq That's the old one on this video got burn... Tha's why @timothystevenhoward says RIP Hyundai 235 in 2024. I believed this is the last video with that machine the day before it got burn.....

Clearly the driver is not a viewer of the channel. 😂

I have a lab and a German Shorthaired Pointer - the lab freaks out about weird stuff and the GSP looks at him like "WTF?"

That grass grew in great.

😂😂😂

Well the truck driver is responsible for their truck, He was scared Andrew was going to damage his truck. I was actually nervous too, andrew has been known to break things

Maybe he does know who Andrew is.😮😂

Yeah, Andrew almost dumped that head into the truck.

I think its easier to pull the trees out then bring them to a burn pile.

@@AndrewCamarata yea, if it was cedar trees the mulch would take 15 years to decompose. ripping trees out of the ground and throwing into the fire leaves the cleanest look by far

@@AndrewCamarata so it depends on the machine and location. Here in Oregon it's currently level 3 fire danger, so no burning and we cannot burn brush or trees under power lines. Heads designed for smaller excavators (less than 250hp) are not great for trees much over 10" to a foot. Many heads also have a certain working angle that they perform better at and of course hydraulics are always a factor. If you want to get more power to a cutting head so that you could take whole trees you would need a power pack to replace your counter weight. We have a CAT 538 kited with a 4' head, it's mainly used for the worse terrain we see but is a beast. However cat reprogrammed it to divert more power to the hydraulics when the head is on so the travel speed and swing power is terrible. The best way to operate a head in that situation is to only turn it on when working with the head and turn it off for movements. I really wish I could show you how we use them and what for because we actually do very little tree removal with the head and focus mainly on woody brush. You could check out the recent shorts for the channel DirtDustMud and that would give you a small view but there is a lot more.

​@GreatNW good input, but this not the West Coast. Also, this young man is learning, but notice he always has monies for his own projects? This young man is getting it done. 👍🏻👍🏻

@@AndrewCamarata You can get wood chippers that mount on a tractor PTO. They work really well, woodland Mills makes a nice one, hydraulic infeed, 8" capacity.

WHY ARE YOU YELLING?!

Now the delivery truck has just the right amount of dents.

Lol that dude is not used to the amount of carnage that is just everyday life for Andrew.

Maybe that delivery truck driver needs a radio installed! Then he’d know who he was dealing with.

Didn't he say "This ain't my fault, bro."?

My dodge is getting past the right amount of dents.

😂 an hour of solitude 🚽 💩

enjoy brother

Legs gonna be purple after an hour pinching a deuce

Dude if u need a skidsteer you are eating too much fiber

Not just a skidloader but one with a bucket 😅😅😅

He's not going to touch your penis mate, calm down.

Driver won't make that mistake again 😅😅😅😅

Haaaaa

Friggin Andrew is a renegade! Love his stuff

Driver had the iq of a peanut

I was thinking the same thing when it first got posted.