Common failer on Corsa D is the ABS pump..is your car pulling to one side..will it not bleed on one side..this describes and shows the problem and what to do. filmed in real time with my mobile phone..
Пікірлер: 181
@seancubs564 жыл бұрын
Excellent breakdown, and explanation of typical ABS system. I am now a lot wiser! Many thanks 😆👍
@plasticsman105 жыл бұрын
Mate you are a legend, i have the same problem on my corsa d, drivers side, i thought my caliper was ceased so i stripped it, then thought the hose was blocked and then watched this video, you saved me a lot of messing about and garage fees, ordered a second hand one for 70 quid, thanks a million mate ☺
@BitsPieces5 жыл бұрын
Nice one..glad it helped you out and saved you some dosh.
@Cedo86 Жыл бұрын
I did everything you've done, starting with caliper, hose and metal tube, the problem was on the first channel on the abs pump itself, valve was stuck in closed position. I heated the pump on oil radiator 😅 for an hour, sprayed valve opening with wd40, generously, and hit it with a hammer couple of times 😬 close to jamed valve, after that valve was unstuck and I was able to bleed the system, flow was enabled and it's braking again.
@plasticsman10 Жыл бұрын
@@Cedo86 nice one mate 👍
@davejohnson9499 Жыл бұрын
Brilliant video. My daughters corsa is having breaking issues where only the drivers side front brake is working. Sounds like the abs pump to me. I'll remove it and test it as you've described. Many thanks.
@aberakadabra12852 жыл бұрын
good video. the code on the valve body is more important because the control modules can be changed.
@zatmanh23 жыл бұрын
Nice vidéo. Same problèm With my Suzuki wagon R (going on left side during strong braking) . I Put 1 used one and everything is ok now. Thank.
@BitsPieces3 жыл бұрын
Brilliant
@e28love682 жыл бұрын
Great video, thanks mate
@tonyjones7372Ай бұрын
Thanks for this!
@Cedo86 Жыл бұрын
I've solved this problem, first channel on the abs pump, more correctly valve, was stuck in closed position, front left wheel didn't brake. I heated the pump on oil radiator 😅 for an hour, sprayed valve opening with wd40, generously, and hit it with a hammer more than couple of times 😬 on that corner close to jamed valve, after that valve was unstuck and I was able to bleed the system, flow was restored and it's braking again. Also I used some hose from garage to blow air, with my lungs, in oil supply opening, there is two, air must go trough all four openings. You can try it without any fancy tools.
@petrcikner31528 ай бұрын
Also, disassemble, spray with WD and tap with a hammer. test that the valve works with a strong magnet. apparently it was clogged due to impurities in the brake fluid. 👍
@paulobest65913 жыл бұрын
Nice vid mate 👌👍👌👍
@ryanodoherty40903 жыл бұрын
I had this exact problem. I'm not mechanical at all so I took it to a garage who quoted me £792 to fix. It didn't feel right so I started looking around. Anyway I ended up buying a second hand part and got a mechanic to fit it. Less than 2 weeks later the second hand part is giving me the same issue 😟 Thankyou for breaking this down, at least I know whats going on.
@BitsPieces3 жыл бұрын
You can send yours off to be reconditioned or buy a reconditioned part..they will come with s guarantee. But a lot more expensive..that's the chance you take with any secondhand part..you have just been unlucky.
@ryanodoherty40903 жыл бұрын
@@BitsPieces thankyou so much for the reply! 😀 can you reccomend somewhere to get a reconditioned part from?
@BitsPieces3 жыл бұрын
@@ryanodoherty4090 Just do a Google search and see what comes up..there maybe someone local to you .
@NGHTNGLHS883 жыл бұрын
Mine turned out be corroded wiring in the loop on passenger side and new sensor. Stressed that first diagnosis mechanic said it cost £800 to replace pump n labour. But took for 2nd diagnosis, plugged into a scanner and guys tested ohms (wheel speed?? Some other electrical terms 🤷🏽♀️) ...traced it to wiring and sensor. £270 job.
@roseanna91004 жыл бұрын
Great video
@BitsPieces4 жыл бұрын
Thanks for watching
@gary669923 жыл бұрын
Nice one brother I have the same problem with my abs took me some time to work it out ordered one from ebay pump full of crap opcom says return pump inactive
@madhavaraop87873 жыл бұрын
Good information 👌🇮🇳🇮🇳🇮🇳
@BitsPieces3 жыл бұрын
Glad you found it informative..
@briantaylor70757 ай бұрын
What tool was used to remove the 4 star patterned bolts?
@wendyscurlytips464 жыл бұрын
Great video thank you
@BitsPieces4 жыл бұрын
Thanks
@ytjcubb3 жыл бұрын
So an easy way to see if you have this problem is first try and bleed your brakes, if no fluid squirts out at pressure when brake is applyed then this is the fault. Is that correct? Great video by the way.
@BitsPieces3 жыл бұрын
Yeah spot on.
@elstimate3 жыл бұрын
LOL 😂 putting a single magnet on to make valve open.. you lost me chief!
@jamesgrice47684 жыл бұрын
Hi before you took the old pump out did you have issues with the brake pedal being very hard?
@BitsPieces4 жыл бұрын
Yes..if you think you are have the same problem..jack the car up one wheel at a time get somebody to press the brake peddle down(keep it down)and see if you can turn the road wheel by hand..if you can, than that's the side with the problem..
@Mark-cm9ls4 жыл бұрын
My lads corsa pulls to the left while braking hard and sort of skids before stopping.its ok when braking steady and drives in a straight line.a mechanic check the servo and master cylinder they are ok..so he seem to think it's the abs pump
@BitsPieces4 жыл бұрын
Jack the front of the car up so both front wheels are off the ground. Get someone to press the brake pedal, keep it pressed down and see if you can turn any of the front wheels, if you can turn one side then that is your problem brake. Try the same thing on the back wheels..if it's an ABS problem it's ussally only on one wheel/brake. Bad tracking can also cause a car to pull to one side on braking too.
@leanne40975 жыл бұрын
Good video. this as just happened to my mother in-laws car but drivers side brake won’t work will it be the same fault only noticed as I took it for mot test today
@BitsPieces5 жыл бұрын
Hi..yes..this was the drivers side too on this car..
@leanne40975 жыл бұрын
Bits & Pieces hi thanks for fast response cheers for that great demonstration on video I’m guessing theirs no uprated pump for this not to happen again
@BitsPieces5 жыл бұрын
Not for the early models. I presume newer models would have been modified...if you get a reconditioned part, it will come with a guarantee..there was a recall regarding ABS problems and free repairs were carried out..might be worth a look to see if your car had a recall ..
@rozedwards96695 жыл бұрын
This video is really helpful thanks mate. Garage have just diagnosed this problem on my wife's 2013 model so Vauxhall obviously didn't change anything! Waiting for garage to give me a quote but if it's a lot I might have to sort it myself. I've seen some people on forums suggesting second hand ones would need recoding or something to work.. is that something I need to worry about?
@BitsPieces5 жыл бұрын
Just make sure you get one with the same numbers...
@MyAnnonymous4 жыл бұрын
I’m having the same problem with my 2013 model, did you get a quote to fix in the end?
@rozedwards96694 жыл бұрын
@@MyAnnonymous Sorry to tell you it was £980.. best of luck whatever you do with it mate.
@MyAnnonymous4 жыл бұрын
Roz Edwards noooo 😱 was your wife’s car losing petrol like crazy?
@rozedwards96694 жыл бұрын
@@MyAnnonymous Ooh no, not that we noticed... it was just dragging to one side as you hit the brakes. Sounds like it would be worth getting a garage to at least diagnose whatever's going on and quote for repairs then you know what you're dealing with 😓
@evieemaya884 жыл бұрын
Great video matey. When you say the car is pulling to one side. Is that just as you brake or when your driving say on the motorway?
@BitsPieces4 жыл бұрын
It's only when you brake. That's because all the braking is only being done by one brake caliper on one side...if your car is pulling to one side generally, then that's probably down to a suspension/steering problem..like the tracking being out.
@almercarrdalisay71603 жыл бұрын
@@BitsPieces sir we have the symptoms..my left brakes front and rear were gone..upon checking no fluid coming out.it means sir that my abs is defective?i have no abs light in my dashboard.sir pls reply..
@joshrichardson20714 жыл бұрын
Took my Corsa into the garage today to sort out a high pitched squealing sound coming from front o/s wheel - instead they came back to me to say I had the issue described in this vid and left my initial complaint undiagnosed. Weird thing was that the ABS light both before and after remained off and I hadn’t actually noticed any swerving when using the brakes. Reckon it could have been a bit of BS due to it being such a common problem with lucrative results in garage? They told me the car should be considered a breakdown until fixed, what would you say?
@BitsPieces4 жыл бұрын
I good garage would easily diagnose this problem, The abs light does not show most times with this problem, If you are not confident in your mechanical skills to check for yourself, then a rolling road test will show up the fault, I.E like when you take your car for a MOT and they test the brakes, it would definitely show up then.
@spankeyfish2 жыл бұрын
Same thing's happened to my nephew's car and the garage has diagnosed it when it went in for an MOT. The ABS light doesn't come on cos it's not an electrical/electronic failure so there's no way for the control unit to detect it. It's a physical fault in the valve.
@Sigmabuzz085 жыл бұрын
Brilliant mate just 1 thing probably a daft question but do you have to bleed the brakes after changing the pump
@BitsPieces5 жыл бұрын
Hi..you.probably could if you can get to the conector..but I think it would be best to remove it anyway..you do not lose your radio code on this model..its all about making the job easier in the long run..plus you really should disconnect the battery anyway when unplugging any conections ..
@BitsPieces5 жыл бұрын
Yeah you have to bleed the brakes
@ductamnguyen18614 жыл бұрын
Hi there, when we change the pump, do we need to bleed the ABS pump, or we just only bleed the brakes?
@BitsPieces4 жыл бұрын
By bleeding the brakes. *all four corners.. you automatically bleed the ABS pump as you do it..
@fermone943 жыл бұрын
Hi , I wanted to ask you if the other unit of abs pump that I have to buy must have ALL the same numbers or just a part of it , and the same two letters (mine is "FC"). Thanks
@BitsPieces3 жыл бұрын
Yes, best to match everything, you could try and swap the black electronic unit if you are struggling to get hold of one with the same numbers..it always usually a mechanical problem and not the electronics.
@fermone943 жыл бұрын
@@BitsPieces thank you
@Cellgm20004 жыл бұрын
Good video bud, quick question . My abs light comes on , only when at 58mph or more. Any ideas ? .
@BitsPieces4 жыл бұрын
Hi, could be a number of things..you need to plug it in to a code reader to see if it comes up with anything..you could do a visual manual check, take the road wheels off and check the ABS censor wires for breaks or wear, rust and so on..
@jorgecosta952 жыл бұрын
Id say your tires are uneven
@hafidskitchen64025 жыл бұрын
Excellent video mate keep it up buddy Will DW40 affect the abs pump if I try one I got in me garage ?
@BitsPieces5 жыл бұрын
Hi..no..just give it a good shake to clear it out. The chambers are not that big, So will not hold a lot..plus bleeding the brakes will flush it out...But the test was just to show the blockage, you do not have to do it. If you definitely know it's faulty by one side not working then just go ahead and change the pump.
@trondandersen6222 Жыл бұрын
@@BitsPieces du sa
@dougsanders60344 ай бұрын
Were you getting an ABS warning light before you took this pump off.
@BitsPieces4 ай бұрын
No.. To test.. wedge down the foot brake, then jack up each individual wheel and see if it turns..if it turns when the break pedal is wedged down or pushed down, the it's faulty..on the rears, don't forget to take the handbrake off, so you can turn the wheels when testing.
@dougsanders60344 ай бұрын
@@BitsPieces Thanks . My pedal goes to the floor and I have replaced the master cylinder, the back wheel cylinders, the front calipers , new rubber brake lines. Pressure bled the system, while activating the pump ABS pump motor, swapped the ABS contol module with 2 used ones, But I didn't have the pressure bleeder or scanner then. I think you just told me my problem, because my right front caliper is not gripping the rotor enough to keep me from turning the wheel while a friend presses the brake.. I have no codes or warnings recorded, as I now have an autel scanner. Thanks again for the informative video.
@tjoesef4944 жыл бұрын
Hello, thanks for your video, wich number on the pump is exactly the part number. And if i found one with the same motornumber is that als good or not?
@BitsPieces4 жыл бұрын
All the number that are engraved on the pump..match them..under the 4 port holes...
@tjoesef4944 жыл бұрын
@@BitsPieces thnx alot, hard to find the same part. So i sended it out for repair.
@BitsPieces4 жыл бұрын
@@tjoesef494 At least you know it will be fixed and will work properly..
@thailandhighlife81703 жыл бұрын
Do all the numbers need to match or just the top row as there is two rows of numbers and I’ve found a part that matches the top row but not the bottom row thanks in advance
@mz4ever1233 жыл бұрын
My brake pedal is spongy & squeaks after I changed my ABS. Does this go away or has the garage not done it properly?
@BitsPieces3 жыл бұрын
Hi, its very difficult to give advice without being able to view the car myself, if you are worried, take it back to the place that did the work and asked them to check it again
@stevemcclelland5364 жыл бұрын
Wow, what a video, top banana mate. Heres a question for you, I have 2010 astra and randomly drivers side front wheel is smoking and the disc and alloy red hot as if brake is sticking on. I have changed pads and new discs and callipers are defo all free and working properly. This abs problem in your video, can it cause the brakes to stick on? Been to vauxhall and they agree nothing wrong with callipers etc.. and also thing it could be abs module. They still have car at minute investigating but I reckon they gonna say it is the module. After watching your 1st class video, if it it the module i might have ago meself rather than pay the £1000 I think they gonna quote me
@BitsPieces4 жыл бұрын
Hi there. If you have changed everything then it probably will be down to the braking module...I have not really heard or had any experiences of this problem with it causing it to stick, but that does not mean the abs braking system is not at fault..come back and let us know what they find the problem is.
@stevemcclelland5364 жыл бұрын
Bits & Pieces So got car back and Vauxhaull cannot find problem. They drove car over 100 mile and could not replicate our fault, albeit was raining all week so probably kept brakes cool. However got car back now and no further forward, apart from £99 lighter in pocket for a diagnostic that showed nothing. Will just see how it goes
@BitsPieces4 жыл бұрын
@@stevemcclelland536 Thanks for the update.
@olehansen66552 жыл бұрын
Do I need a block with the right numbers on or does that matter a lot. I have changed mine abs block and its full of warning light now and a mate tells me it needs to be coded og a block with same model number as the old one. Mine is a Opel corsa D model
@BitsPieces2 жыл бұрын
You.needed a unit with the same numbers .. Try changing the electronics from you old unit on to.your replacement
@olehansen66552 жыл бұрын
@@BitsPieces done , i used the old Electronic and the New bottom, now All works properly
@rp23203 жыл бұрын
Hi. Great video. Is it easy to install a spare yourself if you but a second hand unit?
@BitsPieces3 жыл бұрын
Yeah, the one on this was a second hand replacement..just get one with the same codes. Or send yours away to be repaired..but a second one is the cheapest option
@rp23203 жыл бұрын
Thanks
@anttonagirre46733 жыл бұрын
@@BitsPieces there are 3 codes. All of them have to be exactly the same? Thank you
@BitsPieces3 жыл бұрын
From what I remember, It's the main big code.. but if you can get all the codes to match up, then that's probably best .
@kalis10005 жыл бұрын
Hi I have Mariva 2011 when i press brake it feels like car push forward at low speed from rear brakes anyone have this problem with car please tell me what it coud be ABS or brake callipers.
@timeshift22703 жыл бұрын
Hi, I just have to connect it with the plug or do I have to change the management box with the original one?
@BitsPieces3 жыл бұрын
If you get a new pump with the same code as your old one it will work fine with no need to re-program the cars computer.
@timeshift22703 жыл бұрын
Can I take the case of the old block and put it on the replacement one (used)
@BitsPieces3 жыл бұрын
I have never tried it..but I do suggest it might work in the video, because the car computer will still think its th same one..All I can suggest is you try it.
@soopastylin19324 жыл бұрын
Hi ..Nice video , I have to replace this pump on an meriva b , do I need to code or will it be plug and play like you doing?
@BitsPieces4 жыл бұрын
Hi.. get the code off the old pump and buy one with the same code and then you should be ok
@soopastylin19324 жыл бұрын
@@BitsPieces thanks when you mean the code , are you saying same part number? because they match
@BitsPieces4 жыл бұрын
@@soopastylin1932 yeah sorry..part code..
@soopastylin19324 жыл бұрын
@@BitsPieces Thank you ... much appreciated
@based88729 ай бұрын
do you have to bleed the breaks in order for it to work? I know it’s been 4 years but maybe someone knows?
@BitsPieces4 ай бұрын
Yes..bleed the system..
@basvandervegt73384 жыл бұрын
Right on the spot! My corsa d from 2007 has the same damn thing, also the pessenger side. Until now i was still convinced the problem is the master cylinder the second piston that i think is stuck in the back of the cylinder and thats why i was thiking the abs unit doesnt get fluid pressure from the master cylinder. Can it still be the master cylinder?? I already checked the rest of the system except i havent opened the master and the abs.
@BitsPieces4 жыл бұрын
Sounds like it definitely the ABS pump..its a very common problem. Vauxhall did do a call back to repair the problem for free.
@basvandervegt73384 жыл бұрын
To be sure just now I just bleeded the master cylinder opened the bolts a bit pump the brake stick with a piece of wood close it and repeat. Both bolts pressuring fluid out soo just left the abs I am sure now thanks very much for this video! Need to start looking for a second used abs
@basvandervegt73384 жыл бұрын
Also I was following the brake line from the pessenger and gues what, it comes out in the same port you had the problem on. Also mine has AQ on it and the the series are also the same except the bottom numbers
@basvandervegt73384 жыл бұрын
But in the video you say that the codes must to be exactly the same as the old right. But also you said they can be different but you need to use your old module? So lets say I order an AQ but all the other serie numbers dont match will it work if I use my own module on that?
@BitsPieces4 жыл бұрын
@@basvandervegt7338 I said if you save the electronics (the black part) it might work..but the word to remember is might...just buy one with the same codes as yours then you know it will definitely work...
@onurmengi19825 жыл бұрын
same model which has the same problem in my tool I would appreciate if you can help with the solution
@BitsPieces5 жыл бұрын
Hi..all the info is in the video
@onurmengi19825 жыл бұрын
@@BitsPieces Are the brakes fully improved?my vehicle brakes to the right when I press
@BitsPieces5 жыл бұрын
@@onurmengi1982 Yes..if it's the ABS pump that is the problem..changing the pump will fix it..I suggest you take it to a mechanic to get a proper diagnosis.
@ellaharrrecoverycarsales1406Ай бұрын
Are these coded to the car or just plug and play ? Cheers good info in video
@BitsPiecesАй бұрын
Best to get one with the same code ...
@shahrulhishammohammed45463 жыл бұрын
Please show how did you bleed the abs pump and the whole line
@BitsPieces3 жыл бұрын
Hi, there are videos on KZfaq showing how to bleed brakes..thanks
@shahrulhishammohammed45463 жыл бұрын
@@BitsPieces thanks for reply.. however i wish to see how you did. Or i guess maybe you haven't did the bleeding after the pump has been change. Does it require to bleed the pump once it being changed? Hope for your guidance n tips.
@BitsPieces3 жыл бұрын
@@shahrulhishammohammed4546 You just bleed the brakes the normal way..I can not show you this was a couple of years ago
@nunogoncalves244 ай бұрын
Hello friend, i have the same issue, the front wheel dont break, but dont have error lights abs on the panel. Its possible? Obrigado
@BitsPieces4 ай бұрын
Yes, sounds like ABS pump..it's very common
@nunogoncalves244 ай бұрын
@@BitsPieces thank you, great video!
@sterlingarcher49894 жыл бұрын
Any recommendations for a reconditioning company?
@BitsPieces4 жыл бұрын
I would just do a Google search and see what comes up..there may be a place local to you.
@chucky23164 жыл бұрын
I can recommend control units in Cullompton
@Liam68714 жыл бұрын
Your video is a brilliant help! Just one question when replacing with the new pump how do you reach the nut at the back when putting it back on. Cant seem to get the spanner in
@BitsPieces4 жыл бұрын
I do not understand your question sorry..you must have undone all the nuts to remove it...there is a rubber bush/grommet that hold the pump in place too..you just need to pull hard on the pump to pull it out..as in the video..thanks
@gnosticponderer31144 жыл бұрын
A long angled ring spanner did the job for me.
@Belle13373 жыл бұрын
How do you bleed the abs module? Is it same as bleeding all the brakes?
@BitsPieces3 жыл бұрын
Yes..just bleed you brakes the normal way..starting from the the bleed nipple furthest away from the brake fluid Reservoir..so that will be driver's side rear, then passenger side rear, then drivers side front then passenger side front..(UK) models..
@Belle13373 жыл бұрын
@@BitsPieces Thank you very much for responding back. Your information is useful to me😊👍
@JaspreetSingh-xs1vm4 жыл бұрын
Hi my mechanics sent my one off for reconditioning but when it got back the rear brakes didn’t pump any fluid and front started working again. Is that even possible or is he tryna scam me?
@BitsPieces4 жыл бұрын
I would take it back to them to fix the fault.
@jadejabhagirathsinh70494 жыл бұрын
i have same problems and i can change my car abs module now abs warnings light blinking in instruments cluster. what i do ? help me(vw polo)
@BitsPieces4 жыл бұрын
Did you replace ot with the same model code... disconnected the battery for five minutes and reconnect it and see if that clears the flashing light..if not you may need to have it plugged into a OBD socket to read the fault codes..ots very difficult to give you advice without me being with the car.
@Ironman007-v4p4 жыл бұрын
@@BitsPieces I change abs module sir but now flashing abs light how to fix it I have polo 1.2tdi 2011 highline car Thanks for very helpful advice sir
@richardwallinger16832 жыл бұрын
remove the motor add the valve body to the nightly dishwasher and lightly tap the body of the ABS block to PERSUADE the stuck valve to release .. once the valve assembly is functioning as it should flush the passageways and valves with new brake fluid .
@petrcikner31528 ай бұрын
will this work?
@thailandhighlife81703 жыл бұрын
Do you have to bleed the the clutch as well if it’s a hydraulic clutch?
@BitsPieces3 жыл бұрын
If it uses the same brake fluid reservoir, then probably yes..
@thailandhighlife81703 жыл бұрын
@@BitsPieces Thanks for the vid got it done in couple of hours today was also painless didn’t end up bleeding the clutch but all was okay 👍🏻
@thailandhighlife81703 жыл бұрын
@@BitsPieces Not bad for £50 fix 😂
@BitsPieces3 жыл бұрын
@@thailandhighlife8170 Brilliant..always worth giving things a go..it can save you a fortune..
@upyourarse14 жыл бұрын
Hi. Ive changed my pump. Everything is fine but the abs light and brake light have came on and stayed on, is there a way to get them off. Ta
@BitsPieces4 жыл бұрын
There may be a fault and that's why they are on..it the brake fluid at the correct level they may cause the brake light to come on...did youn get a pump with the same codes..you may need to be code read via the OBD port to see what it's saying is at fault ..
@upyourarse14 жыл бұрын
Bits & Pieces hi, looking a bit further into it it looks like it needs recoded, read on a site somewhere you can change the black piece over from old one to sort it out?!?!?!?
@BitsPieces4 жыл бұрын
@@upyourarse1 If you used one with the same unit codes it should work. I do explain this in the video.. and I do point out if worst comes to the worst you can swap over the black control unit on the pump (in video) thanks
@upyourarse14 жыл бұрын
Bits & Pieces bloody hell, didnt even notice!! Cheers, best watch it all again
@upyourarse14 жыл бұрын
Hi again, probs being thick now...took black brains off original pump and just quickly plugged in wiring, car wouldnt start, was a long shot but do i take it it all has to be fully changed over to work, cheers....also while im here do you have any videos on how to turn airbag light off, one on centre console flashing and one on dash, cheers
@alvinscorner4 жыл бұрын
Is there any specialist to unclog the abs valve?
@BitsPieces4 жыл бұрын
If you.search the internet. You will find specialist that recondition the pumps
@chucky23164 жыл бұрын
Controlunits in Cullompton he did my mazda 2
@alvinscorner4 жыл бұрын
@@chucky2316 where is that?
@chucky23164 жыл бұрын
@@alvinscorner Devon he fixed my mazda in 2 hours for 280 quid 😁. If you Google control units Cullompton his details should come up
@arisdim36283 жыл бұрын
Hello there!! I got an opel corsa 2007 1.2 when i stop the car using brakes and then start it back up and try to drive away the breaks lock without me doing anything but if i stop the car using the handbreak and then start ut back up the car works normally...whats the issue here? (Sorry for the bad english i hope u understood what am i talking about)
@arisdim36283 жыл бұрын
Its like ABS lock-release, lock-release for a couple of times and then drives normally
@BitsPieces3 жыл бұрын
Sounds like it could be sticking caliper or handbrake mechanism/cable sticking
@arisdim36283 жыл бұрын
@@BitsPieces oh thanks for the quick answer man! Appreciate it! I took it to a "mechanic" the other day amd he was like "oh you need to buy a new abs pump (or whatever its called)"
@arisdim36283 жыл бұрын
He didnt check it or anything just from what i told him he made that conclusion
@BitsPieces3 жыл бұрын
I would take it to another Mechanic to look at, for a second opinion..Its not really easy for me to tell you what the problem is without actually looking at the car...But the ABS pump is a common problem on these.
@willsw1359 Жыл бұрын
My 2010 sri corsa d brake pedal went to the floor slowly one day, pumped the pedal and brakes worked fine for 2wks, it's been on a rolling road,all 4 brakes are fine and no leaks, could it be the abs pump or master cylinder at fault?
@BitsPieces Жыл бұрын
Surely, the garage that did the testing would have advised you of the possible problems
@willsw1359 Жыл бұрын
@@BitsPieces they said change abs module first and then change master cylinder and if that doesn't solve the problem change the servo
@BitsPieces Жыл бұрын
Is the problem still there..
@willsw1359 Жыл бұрын
@@BitsPieces yes, brakes are fine for a couple of weeks then the same thing happens, could it be the master cylinder??
@BitsPieces Жыл бұрын
I don't think it would be the ABS pump...have you rear drums or discs
@AdrianNiculae5 жыл бұрын
Hello. I replaced the abs block and noticed 2 brake pipes are wrong. Can something serious happen if I do not mount them properly? Thank you.
@BitsPieces5 жыл бұрын
If you know they are the wrong way around..just put them the right way.
@AdrianNiculae5 жыл бұрын
I noticed no lights on the board and I guess it's ok.
@pataleno2 жыл бұрын
My sons just showed up on MOT failure so wanted to check what’s required. I hope I can get them to provide a reconditioned one and not rip me off £500 for a new new one. Fuming. Vauxhall really are shite cars.
@TheHamouda9 ай бұрын
You said start bleeding from the wheel farthest from master cylinder. I think its not correct should start with the wheel fartest from abs pump