This is the best video I have seen for installing this type of floor. Awesome!
@RuthiesVlogWorld2 жыл бұрын
He's!!!He killed this!!thank u sir
@559kalifornia52 жыл бұрын
Girl who does flooring ?
@angeliatheebbw2 жыл бұрын
@@559kalifornia5 yes I’ve done my own flooring.
@bettygood100 Жыл бұрын
@@RuthiesVlogWorld ppp
@user-zp8jw2we7r8 ай бұрын
It's really helpful. Finally there's a video involving seam glue.
@godspeed2145 Жыл бұрын
lol you're the only one that explains it thoroughly on KZfaq, amazing job
@NaeDeen2 ай бұрын
LITERALLY!!
@coryfricker372 Жыл бұрын
Definitely one of the best explained videos I've seen on KZfaq. Thank you
@terryhites12 жыл бұрын
I’ve never done this job but will be soon, I watched to see how to make a joint, I feel very confident I can do it now! Thanks for the step by step!
@LisaCunninghamLieveEnterprises Жыл бұрын
Great Video! Your delivery is easy to understand along with your step-by-step instructions and video. Appreciate this a lot and will be following your installation steps as I install my rolled vinyl for a bathroom! Its funny when you go into the big box stores to purchase rolled linoleum, you ask them if you're going to need glue and they tell you yes, glue down any of your vinyl flooring. They do not share the fact that different manufacturers use different methods for their floor.
@mrbmp09 Жыл бұрын
Excellent video. Tip for beginners, use double sided masking tape to help hold the straight edge in place. Also, don't move the straight edge if you don't have to, like he did on the first cut.
@mikeytee68212 жыл бұрын
GREAT VIDEO! Was binge watching these types of videos because I am starting a flooring project and found yours the best! Thanks!
@skittlesrainbow4853 Жыл бұрын
My new house has this type of floor in the kitchen, living room and bathroom. it looks nice.
@amberarkel5236 Жыл бұрын
Does it hold up well? I want to put some in my bedroom
@thisisfutile2 жыл бұрын
To roll the vinyl, I always cut the cardboard core (that it comes rolled up on) down to smaller length and just use my body weight to roll it out with that.
@thisisfutile10 ай бұрын
@bellinghamfpvI have a feeling you're joking, but for those that don't get the joke, I'm no physicist, but the rolling pin might not be enough leverage. With the cardboard core, they're probably 8 inches in diameter, so with my 240-pound frame, leaning on it will add considerably more pressure than if I used a rolling pin. The core also allows for longer, wider strokes of pressure. It will be hard to keep enough pressure on the rolling pin to get every inch of the floor. All physics aside, it's better than nothing. Although, you might be better off just taking small steps and walking all over the floor, allowing your entire body weight to do the work. HTH
@thisisfutile10 ай бұрын
@bellinghamfpv Come to think of it, we have a slightly bigger bathroom (4x7 maybe) and years ago when I put vinyl down, I didn't do anything, not even trowel. To this day you can see the bead of adhesive I put down, through the flooring. You can even feel it on your bare feet. I wish I had used a rolling pin. Anything would have helped, lol.
@tonyo7324 Жыл бұрын
Hi Excellent tutorial video. We just had a vinyl sheet laid in our laundry room after it was damaged by water leak. The guy who laid it did not do the preparations like you did. Did not remove the old glue no sanding so the floor is rugged. even though I mentioned about the floor. No underlay was installed even it's in the contract. I saw him just applied glue and laid the carpet. No ruler either. in 20 minutes he was done. Put back the Washer/Dryer right away. Just few minutes after he left humps and depressions were all over. We complained and 2 days later he wanted to rip the whole vinyl and move out the W/D. I told him no. Even the project manager agreed with him. We told the project manager that it could be seamed and we don't mind what's under the machines. He will send another guy who works on vinyl tile. I saw your video and maybe I will show this to the Project manager. Hope this will solve the problem.
@1psyurmind200 Жыл бұрын
This is the best video I have seen to date. Great job. You explained the process so well. Thank you
@D.I.Y._All-in-One Жыл бұрын
Glad it was helpful!
@hildoir3 жыл бұрын
I'm doing this tomorrow, thanks brahhhh. I'm really glad I looked at this video for the wood filler part, I have a tiny gap that I wouldn't think it would show but youve made me want to buy it very badly before i do the linoleum.
@4seeableTV2 жыл бұрын
How'd it go?
@Arty-Zen2 жыл бұрын
Thanks so much! This makes it look far less daunting!
@Sarassparkles3 ай бұрын
very informative for a first timer. thanks
@4seeableTV2 жыл бұрын
In addition to doing everything very professionally, that roller really does the trick when smoothing it out. I'll have to find a place that rents those.
@Warriorlover699 ай бұрын
Deserves a subscription, thank you
@merrittrenovations65472 жыл бұрын
Most informative video that I've seen. Thanks.
@hanslang491011 ай бұрын
Excellent video. Very value heavy content. Thank you
@thomasbenson13795 ай бұрын
Nice video. But why would you put glue over the tape, and not just pull the protective layer off the tape and press the vinyl onto it?
@yonnadaniel86542 жыл бұрын
Excellent video! Best one I've seen. Thank you.
@bryanrojas5982Ай бұрын
Thank you so much man just helped out a lot
@jackt6112 Жыл бұрын
Perfect! Well explained.
@izalith58479 ай бұрын
Omg ive spent 6 years useing a trowl. This is so much nicer. Abit more expensive but worth it.
@Osay12168 ай бұрын
We just did this to our investment property floor. Same style
@borus1976 Жыл бұрын
Perfect dude!! Great job.
@D.I.Y._All-in-One Жыл бұрын
Thanks a lot!
@andrewwestwater7741 Жыл бұрын
Great video - unfortunately my bathroom "designer" didn't use damp cloth and wipe glue as he went - made absolute mess that looks like stretched chewing gum on a pavement..
@OneandOnlyLadyofLove4 ай бұрын
Excellent video 🎉🎉🎉
@theadviser1232 жыл бұрын
Awesome video! Now I know how it's done!. You are very thorough. Thank you so much!
@willkildare2 жыл бұрын
AMAZING good job
@Nah_jack2 жыл бұрын
Thanks for the video
@Aeroxima2 жыл бұрын
Very thorough
@christiantabernacleevansvi10333 жыл бұрын
Thanks so much! Very helpful.
@da-gc2 жыл бұрын
Love your work. Easy step by step video I've seen. Can I get the link to the video how to lay underlayment floor?
@danielvega66433 жыл бұрын
Very interesting informative video thanks. 👍
@parvanehanderson4922 жыл бұрын
you are great!
@stevenlail49952 жыл бұрын
Thank you
@LinhNguyen-ll1ci Жыл бұрын
Great Thanks
@ecgodsmack862 жыл бұрын
How much would this cost to install labor wise on a 1,500 sq ft home? More or less.
@maureenpeniuk863 Жыл бұрын
Great video! I have vinyl roll flooring that was purchased over 25 years ago. So I don't know what the manufacturer recommends for seams. I think it is paper backed. What would you suggest I use for seams?
@vuhoang712 жыл бұрын
Thumb up to you 👍👍
@buddymcclure61702 жыл бұрын
Great video and thanks for sharing!
@marierasmussen77992 жыл бұрын
I want to lay this in my basement laundry room. The house is 4 years old. The floor is concrete. Should I seal the concrete first? I am worried about the concrete absorbing the pressure sensitive glue. Great video!
@D.I.Y._All-in-One2 жыл бұрын
Primer / sealer can work good, but it doesn't necessarily need to be sealed, just extremely clean for the adhesive to bond good.
@samanthanelson35632 жыл бұрын
woww want to come do my place haha
@chrismen84992 жыл бұрын
Do you have a video on installing baseboard?
@user-hm1cq9wr2o10 ай бұрын
C.L.S. All-IN-ONE (Or anyone who can help) Professional level video! Question please. I need to hang sheet vinyl on walls in a wet room (high humidity, very damp conditions). I have been unable to find much info on this. I'm really confused about which adhesive would be best for this purpose. Any tips or suggestions? Thanks! Liked and Subscribed
@angelmoreno19882 жыл бұрын
Where's the video for the underlayment you mentioned?
@IsaacJohnsonCompaniesLLC-vl3qt6 ай бұрын
I see that you are installing the sheet vinyl onto underlament. Have you ever installed sheet vinyl onto a subfloor?
@RuthiesVlogWorld2 жыл бұрын
Thank you so much for sharing this video this is so good is it necessary to add the underlayment if you are already on plywood flooring if it’s not like a major indentation underneath
@D.I.Y._All-in-One2 жыл бұрын
Not necessary but the floor needs to be cleaned and possibly primed for adhesive to stick.
@RuthiesVlogWorld2 жыл бұрын
@@D.I.Y._All-in-One What do I buy to prime the floors a regular floor primer? Also what kind of brush did you used to roll the glue down
@D.I.Y._All-in-One2 жыл бұрын
Just a regular floor pimer should work and I apply the adhesive with just a short nap roller
@RuthiesVlogWorld2 жыл бұрын
@@D.I.Y._All-in-One Thank you so much for this information I try to do this laminate flooring with a trial and oh my gosh it was such a mess....thank you so much
@OLAJUMOKEable14 күн бұрын
Pls can it be lay down on wooden floor
@IsaacJohnsonCompaniesLLC-vl3qt6 ай бұрын
I haven't seen a video about gluing vinyl flooring, yet.
@guysolis5843 Жыл бұрын
I'm not a flooring expert and I would some cheap, paper thin garbage from Lowes. I got it down ok but ripped it when moving in my frig. I used two layers of cardboard. I have a better way to move it but my floor is hard and the adhesive seeped through and stained the surface..Wish I went a different route..
@DuchessofEarlGrey Жыл бұрын
Try those plastic gliders next time, like Home Depot's Glide N Guard.
@chrisc-bw6cc Жыл бұрын
If it says "do not perimeter bond", does that mean to only use tape on all edges including any seems??
@mrapma2 жыл бұрын
What are other suitable underlayments? My floor looks like cement. Has peeling a few layers. Some areas have some kind of primer sealer other areas have epoxy. Floor is not level. It slopes down. I do not have option to fix slope. On a very tight budget.. Need it to last 2 years.
@da-gc2 жыл бұрын
Hi. Wats the flooring called that yur laying down & nailing bfor u lay the Shetty vinyl? That's wat I need to put on top of my carpet to make it firm & stable bfor putting down sheet vinyl
@juancarlosverdugo41113 ай бұрын
X2
@debramattera35792 жыл бұрын
Is there anything that can be applied over the top of the vinyl sheet to help guard against scratching or scruffing up the surface?
@D.I.Y._All-in-One2 жыл бұрын
Not really, about the only thing you can do, is use rugs/floor runners. But if this is something you're looking to do just temporarily, there is self sticking clear sheeting that comes in rolls or paper sheeting that comes in rolls, that you can protect the floor for short periods of time.
@amandao76602 жыл бұрын
Hi there - how do I seam the vinyl if the length is too short? I’ve got a wood effect sheet but I’m not sure how to blend it with the “planks” being different lengths 🥴
@D.I.Y._All-in-One2 жыл бұрын
You can do a staggered cut with the wood plank design, but that will require some very intricate cuts. Flooring with designs like that are usually seamed in the other direction.
@sloppydoggy92572 жыл бұрын
What do I use if my floor peeled up quite a bit? Its not a clean surface…
@babytt84872 жыл бұрын
Contact Adhesive you should have cleaned the flooring before you stuck the vinyl down.
@Ksquizzles093 жыл бұрын
Would you suggest an underlayment when installing vinyl sheet flooring on concrete?
@D.I.Y._All-in-One3 жыл бұрын
No but if have uneven or cracked concrete you might need to use leveling compound to make floor surface smooth.
@Ksquizzles093 жыл бұрын
@@D.I.Y._All-in-One concrete is newer so it's in good shape. The reason I ask is I was recently renting a house before purchasing the one I'm finishing and they had used vinyl sheeting for the laundry room and I really liked it cause it was tough but somewhat soft. I asked the landlord and he said he installed a vinyl sheeting that already had a padding on it but the stuff I want to buy doesn't have a underlayment and is only 2mm but I would like a similar feel. Is it just something I am best getting over or is there a way to approach it?
@D.I.Y._All-in-One3 жыл бұрын
I would try and find a thicker vinyl flooring around 3.5mm or more. There is also vinyl plank flooring which sometimes has padding/ underlayment built in, for another option.
@Ksquizzles093 жыл бұрын
@@D.I.Y._All-in-One awesome. Thanks for your time!
@jodyscott8647 Жыл бұрын
Where I can I get some of that underlay
@veronika6843 Жыл бұрын
Can someone please say what materials and tools names used in this video.
@abdessamadbouaicha3286 Жыл бұрын
What is the manufacturer of the vinyl sheet you used in this video? Thanks
@Joshuam808.4 ай бұрын
This helped me a lot thanks!
@rightorrich51853 жыл бұрын
What type of underlayment do you recommend? I’ve been looking everywhere and can’t find one for vinyl flooring
Looks like something called IntegraPly. I used Sureply, which is 1/4" thick. The markings showing where to staple are very helpful.
@robertarevalo3571 Жыл бұрын
What was the brand and model number for the vinyl?
@psfgtech6 ай бұрын
No mermolium?
@nonameiiii2 жыл бұрын
What did you put around the edges by the wall? Like where the flooring meets the wall?
@JayZoop Жыл бұрын
The border is covered by baseboard.
@damnitdang2 жыл бұрын
Can I glue this straight into osb?
@D.I.Y._All-in-One2 жыл бұрын
If the floor surface is nice and even and clean, then yes. If there is wide cracks or seams they will have to be filled.
@rahkim Жыл бұрын
do you need to use adhesive?
@DuchessofEarlGrey Жыл бұрын
Check the manufacturer's instructions. With the one I'm about to put down (Mannington brand) it says you can loose-lay but only if there are no "pinch points." Unfortunately they were kind of vague, but I'm guessing that means anything heavy (bed, cabinets, fridge) or screwed down, like a toilet.
@sixstringerati2 жыл бұрын
iS THE mCCAULIFE ADD AIRBRUSED OR WHAT
@williamlopez49342 жыл бұрын
Think it last a long time?
@socialjusticewarrior96012 жыл бұрын
15 year warranty. Id say so if done right.
@gtagriff900schannel65 ай бұрын
Looks like a pain in the ass, laminate planks seems way easier
@Joshuam808.4 ай бұрын
Laminate planks are more expensive and not as waterproof