I put vinyl in my basement in 1985 and it is still there. It has been under a couple inches of water when a pipe burst. Stuff is amazing. Last year I put peel and stick on top of it to update the look.

I’ll go ahead and have a beer and I’ll be right back…. *4 beers later* alright so we’re back. So you want to measure this because you don’t want to cut your carpet in the wrong place. Wait, I thought we were talking about vinyl? Lol… funny stuff. Anyway thanks for the video, good info.

Very Nice job, Tyler. Vinyl Sheeting flooring certainly looks Better than Concrete and it’s very durable. Thanks! 👍

Awesome job! Very interesting to watch.

Beautiful!

Cut a pie-shaped notch in the lid of the plastic bucket with a utility knife then just pour out the adhesive as needed. You get it on your hands when you try to dip the trowel. You can wash it off right away with water. If it dries you need turpentine. Gloves are no good as they get sticky then rip.

I'm going to use it on stairs. I didn't think about using that on my basement floor, but that looks like a good idea, except maybe pressure sensitive glue. It's cheaper, doesn't require a flat floor so it works with drainage, and no opportunity for mold or mildew underneath.

Good video...thanks!

great video dc good too see you back sir

Thank you❤

I like that color

Good to see you're back. I was wondering just the other day whatever happened to you.

I have to install vynil on concrete in my garage, someone suggested to put it without glue is this correct? Have I to seal the concrete before install vynil? Thanks great video

Nice flooring. What do you have on your walls?

Nice job.. I would have painted the drain grill before sealing it in tho :)

How can I use the same flooring on my garage walls no sheet rock right on the 8x4 or 2x4 Wood

Can you install sheet flooring for whole house?

Great video! Thanks! I'm in the Netherlands so I can't ask you to come and help me with my project. I still have to remove debris like spots of dried paint and scraps of building materials but, thankfully, it's a new home. I chose a (greige) smoked oak and will lay it throughout the entire house.

Buy the vinyl with the pad on the back. It is a floating type floor. Cut your install time by 90%. Worth the extra buck a foot.

Where did you get the vinyl sheeting from?

Nice video and fully explained. Just wondering what glue you used?

No moisture barrier first?

before you begin < The drain will easily be felt later, don't bother, measuring off walls to center. Even a dangling string held from ceiling above. Also Working alone, 50% may be hard "too much" unless you at least use a weighted push broom to help you & should have a weighed roller also to keep it bonded. Out feed rollers stands can be helpful. You are right not gluing up to the wall edges. Use a steel edge to cut with all the time ! If you have a decent 48" Harbor Frt steel ruler your cuts will all be cleaner fitting to walls (just a few point along the wall marked on tape, Keep some excess for repairs in a corner. if you choose to place add'l glue the last inc or so, or not. Yes a good DIY exercise in a limited area.

Where did you get that at and how much please

Have you ever done this on top of plywood/Manufactured home sub-floor? Also, is it common to lay this straight on top or is it better to have an underlayment?

Great video, but I didn't see you push out the air bubbles as I've seen in other videos. Why is that? Thanks

What was the best way to get the glue off your hands. I find it’s a real pain. Also how long of tack time did you allow for the glue to start to set before you started to lay the vinyl

How is this holding up??

can i just lay it down without the glue? I just dont want to deal with the removal down the road if I need to replace it

I used to install commercial flooring for bout 15 years and it's been bout 15 years since I have. This is supposed to be a cheap budget floor so where did you get it

Any concerns gluing to basement floor with out a vapor barrier?

What’s the company and model number for the barn wood sheet vinyl

I have plywood can I still use this vinyl sheet

Where can you get the glue from?

Carpet? said multiple times must be good beer.

The other videos about vinyl sheet flooring installation said you only need adhesive for the edges and not the entire area. I guess if you want to go the extra mile, it wouldn't hurt. But I myself would just do the edges only.

Do you have a link to that flooring?

What store can I buy this type of vinyl

I’m floored after watching this video. Ha ha! Looks Great!

Hi Tylor wondering where you went, thanks for the video.😊 I know this is after the fact but Home Depot has black nitrate rubber gloves on sale 100ea for ........gads I forgot, they were fairly cheap.🤔....a mind is a terrible thing to waste.

Looks good but…. Your supposed to let the glue set before you put it down it still looked wet When you can put your hand on the glue and it comes up clean your ready

Where'd you get the flooring?

*compromise (at 1:04) your adhesive, not " comprehend", sorry

You don’t show using a roller to smooth out .

Would it be possible to just let the sheet GO UP 3 inches whereever it touches the walls, instead of a baseboard? And also make it easy to clean in the corners in the future? Or is that a stupid idea?

how much is it?

how much glue do you need?

Why can't you just glue or tape the edges.

Oops! Installing vinyl sheet directly on concrete is a no, no. Condensation will create mold under your sheet and may even seep through and discolor it. You need subfloor membrane panels.

How is LHL’s favorite Son in Law doing.

Music 😡 no like