Thank you! That was our first time using resin. It took us a couple of tries but it was very satisfying to see the final result. -Saphira

Thank you!

Yeah that is not easy. They were not high res at all. I used Photoshop to edit the pictures so that the bad quality is not too noticeable. What you could try is use an AI tool to upscale a low res picture so that you get something you can work with. I am not 100% sure but I think that capcut has a Feature like that in their Web application which could be available in the free Version...

If you completely enclose your sticker with the resin it should work absolutely fine since the resin will stick to itself. Usually the biggest problem is when the resin seeps through the material you use for your picture like with paper when its not correctly sealed then it will turn out ugly. I haven't tried vinyl stickers but I think you should be fine..but maybe do a test run first before you ruin your sticker just to be sure.

@@KyokoSaphira thank you so much❤

You need to make sure you close every little hole crevice or else the resin will leak through. We have used this method a couple of times now but with hot glue on OHP Sheets and it works perfectly.

I am sorry we don't. You could try following the tutorial it takes a bit of practice but is not difficult at all.

No we don't.

@@KyokoSaphira that’s sad TT

We used Overheadprojector Sheets =)

@@KyokoSaphira excuse me, can i please know again, was it silicon glue u used or😭, where can we get it?

We used normal hot glue and Vaseline. You can also use Silicon if you want then you don't need Vaseline because the resin doesn't stick to silicon.

@@KyokoSaphira ✨💓

Everything is explained in the video 😉 Hot glue for the mold and Overheadprojector sheets for the pictures and as surface for the molds and casting.

Imagine editing these videos...you cringe even harder 🤣 English is not our first language so there is nothing we can do but practice speaking it.

Why would you ever do resin casting on an ipad? 😵