Thanks for the content, i just cancelled haikyu figure 😢😅
@tomasc020221 күн бұрын
Animagic does not only stand out in Germany, it stands out in Europe. For it's size it's huge and i would say only Japan Expo in Paris is bigger when it comes to the line up. In Germany you have Anime Festival Kassel and Babelsberg as well who are doing really well in inviting guests. Dokomi is my favorite convention here, for me it's the complete experience of what should be in an anime convention. While it does not have the biggest line up, it has one of the best vibes (i think Japantag has the best vibe but that's not really convention but rather an outside festival) And there's the J-rave which is my personal highlight every year, it's the best party. Looking at conventions in Europe i think Germany has the best ones. Some of them are more commercial but there's still a cosy vibe on most of em, everyone of friendly and hyped up, even on these small Anime Treffen events. I have been to conventions in a few countries since last year and looking at France and especially Belgium it's all super commercial and besides the big ones in France it's nothing special, just comic con over and over. The Netherlands has no big anime conventions but there some fun small ones, usually fully run by volunteers. Like Abunai, Animecon or Viencon (it"s in Centerparcs holiday resort!) Most of the time there is no special guests though but they have fun parties and there's a lot of alcohol. Last week i was also in Sweden for Närcon, that was a fun convention as well, similar to the Dutch ones. I'm typing this now being hyped for Animagic tomorrow. Tomorrow morning driving from Limburg Belgium to Mannheim.
@KyokoSaphira21 күн бұрын
Wow that is a great inside into the european convention scene. Can't wait for tomorrow Animagic is our highlight of the year =)
@kaia666129 күн бұрын
Do you sell them on Aliexpress??
@KyokoSaphira29 күн бұрын
No we don't.
@kaia666124 күн бұрын
@@KyokoSaphira that’s sad TT
@bjmgraphics617Ай бұрын
It looks fantastic! Do you know about other online stores? Thanks
@KyokoSaphiraАй бұрын
Thank you! Unfortunately I don't know any other shops. I have bought some 3D sculpted kits from etsy shops but thats all I know.
@ivancrencic4690Ай бұрын
Hello! What kind of glue you used for the eyes?
@KyokoSaphiraАй бұрын
Those are waterslide decals they stick on their own. I used nail polish to make the eyes shiny.
@ivancrencic4690Ай бұрын
@@KyokoSaphira you just have to put them on water an then on the face? I just bought a resin figure and it's all painted but it came with the eyes and eyebrows separated for you to put it in, I don't wanna ruin it
@KyokoSaphiraАй бұрын
@ivancrencic4690 yeah thats how those decals work. Do you only have one pair of each? Or some spare decals? Was there no description on how to put these on with your figure?
@KyokoSaphiraАй бұрын
You have to put them in to water until your decals solides of easily from the paper. Then as long as it is wet yoz can put in on your figure and place it where you want it. As long as its wet enough you can adjust the position until you are happy with its placement. Then leave it to dry and fix it with nail polish.
@ivancrencic4690Ай бұрын
@@KyokoSaphira It came to me with a small cardboard with the eyes, eyebrows and details of the face. Two pairs of each, which I think is to have a spare in case you need it. They are like glued to that cardboard. It came with instructions but they're in japanese, I couldn't translate them yet
@lunamisuzuАй бұрын
May I ask where you found such high resolution photos in order to make the standees? I’m having trouble finding good quality images.
@KyokoSaphiraАй бұрын
Yeah that is not easy. They were not high res at all. I used Photoshop to edit the pictures so that the bad quality is not too noticeable. What you could try is use an AI tool to upscale a low res picture so that you get something you can work with. I am not 100% sure but I think that capcut has a Feature like that in their Web application which could be available in the free Version...
@shanks7987Ай бұрын
I hate when great figures are ruined with a lazy base 😭
@Vanessa-pb5dmАй бұрын
Hallo, ich habe das Video nun 1 Jahr nach Veröffentlichung entdeckt. Ich interessiere mich zurzeit auch für GK und überlege bei E2046 zu bestellen. Wie war denn deine Erfahrung mit der Seite und dem Versand nach Deutschland? Musstest du viel Versand bezahlen und welche Versandart hast du gewählt? Würde mich total freuen, wenn ich ein paar Infos aus dem deutschsprachigen Raum zu der Seite bekommen könnte :) Lg Vanessa
@KyokoSaphiraАй бұрын
Also eigentlich hatte ich immer gute Erfahrungen dort gemacht jedoch wurden meine letzten 2 Bestellungen immer beim Zollamt zurückgehalten und ich musste so ein Zollanmeldeformular ausfüllen. Das war für mich extrem kompliziert und unverständlich sodass ich hier einen externen Dienstleister dafür in Anspruch nehmen musste. Daher würde ich da tatsächlich in Zukunft nicht mehr bestellen. Obwohl ich die Seite eigentlich sehr mag ist das für mich persönlich zu aufwendig und zu teuer. Wenn man sich mit Zollanmeldungen auskennt ist das bestimmt kein Problem. Die Versandzeit variiert je nach Methode. Ich habe bisher Luftpost und Überland genutzt. Für die Violet war es bei Luftpost ca 76$. Dafür ist aber die Qualität der Kits und auch ihrer prepainted figuren sehr sehr gut. Der Kundenservice war auch sehr gut. Einmal fehlte eine Hand im Kit, dass haben sie mir umgehend nach gesendet .
@Vanessa-pb5dmАй бұрын
@@KyokoSaphira Danke für die schnelle Antwort! Ich kenne mich auch nicht so aus mit Zoll usw. und werde dort vielleicht mal bestellen, nachdem ich mich schlau gemacht habe😅. Wobei ich gerade Probleme mit Japanpost (von einer anderen Seite) habe und mein Paket seit mehr als einer Woche beim Zollamt ist. Ich bekomme aber keine Benachrichtigung was ich nun tun soll. Zoll kann schon echt nervig sein.. 🥲
@tranqkillАй бұрын
where did you get the eye decals?
@automatic8896Ай бұрын
Hey did you guys have a random button in the box near her head? I wasn’t missing anything off her jacket but a random was just loose lol. And did you have any trouble taking the jacket on / off? I’m very scared to do it lol. Sorry if I missed it in the video my English isn’t so great ❤
@KyokoSaphiraАй бұрын
I don't remember an extra button. But I know one of them just flew right of her vest when I tried taking of the vest which was scary. I think I glued it back on but never ever tried again to take it off
@automatic8896Ай бұрын
@@KyokoSaphira ah thanks for lmk, I have 0 clue what it’s from then 😂. How does the jacket open / close btw is it Velcro or something? Thanks ☺️
@KyokoSaphiraАй бұрын
I think it was buttons...tiny snap fasteners if i am not mistaken
@automatic8896Ай бұрын
@@KyokoSaphira ty :)
@Joyce-rv1vn2 ай бұрын
Hello again.. I wanted to ask if i could use vinyl sticker for casting the picture in the resin liquid?... Will it stick to it?
@KyokoSaphira2 ай бұрын
If you completely enclose your sticker with the resin it should work absolutely fine since the resin will stick to itself. Usually the biggest problem is when the resin seeps through the material you use for your picture like with paper when its not correctly sealed then it will turn out ugly. I haven't tried vinyl stickers but I think you should be fine..but maybe do a test run first before you ruin your sticker just to be sure.
@Joyce-rv1vn2 ай бұрын
@@KyokoSaphira thank you so much❤
@Add_some_scribbles2 ай бұрын
Question!! So I have a figure that lays on the ground facing up. Not sitting. Literally just laying as if she was sleeping, I’m having trouble displaying her, I unfortunately don’t have any low shelf’s either, any suggestions? 😅
@KyokoSaphira2 ай бұрын
Hmm thats difficult... if the figure has ab base you could try propping her up a little bit. But its really hard to tell without seeing the figure.
@calico32022 ай бұрын
Gotta love artists and customizers - you did an amazing job for a first custom and went 'well, she turned out okay' haha :'D I've come back multiple times to rewatch this video in the last months and it's finally given me the courage to start my own first custom/repaint project, so a big thanks to you!
@KyokoSaphira2 ай бұрын
Oh that is so sweet of you thank you! What will your first custom be?
@calico32022 ай бұрын
@@KyokoSaphirait's an original character, i'm gathering the last pieces i need and i'm excited to start the customizing :)
@kay75092 ай бұрын
Welcher von den drei Tagen war das? :)
@KyokoSaphira2 ай бұрын
Das war der Samstag =)
@ChelsSim3 ай бұрын
This gave me an idea, I don't like grandista sanji, so if I end up getting a smaller scale sanji, I'll just add a clear stand under. Just place him behind my smaller scale oden. I have small limit space anyway lol. For Samurai chopper I put him behind oden but on top of oden's box. Now Chopper is more visible. And pairs well with oden making it look like a wano cinematic poster.
@Mazuko_chan3 ай бұрын
What did u use to make the mold
@KyokoSaphira3 ай бұрын
Everything is explained in the video 😉 Hot glue for the mold and Overheadprojector sheets for the pictures and as surface for the molds and casting.
@Mazuko_chan3 ай бұрын
For the character
@Mazuko_chan3 ай бұрын
What paper did u used
@Mazuko_chan3 ай бұрын
Hey ima give u a warning if u do it on a ipad u might pull of the screen
@KyokoSaphira3 ай бұрын
Why would you ever do resin casting on an ipad? 😵
@Mazuko_chan3 ай бұрын
Hey ima give u a warning if u do it on a ipad u might pull of the screen
@Mazuko_chan3 ай бұрын
Hey ima give u a warning if u do it on a ipad u might pull of the screen
@doodledand68323 ай бұрын
Thank you so much 😭😭💖💕🇲🇽
@Koloradus963 ай бұрын
I'm from Hungary, and I checked these german websites. I did some e-mailing and research to compare prizes for Girl's Frontline figures. These german websites are very overpriced. We are talking about 20% price difference here.
@KyokoSaphira3 ай бұрын
Thank you for your comment! You are absolutely right! We would always recommend buying from japan if you want to safe money. If you want to support your "local" scene or as a beginner are too scared of ordering from japan these shops have been the best options to our knowledge 3 years ago. Please consider this video is almost 3 years old and a lot has happened in that time. Their prices always have been higher than in japan but just for context in case anybody is wondering: In june of 2021 there has been a change in the customs law. You now have to pay customs taxes from the first €. All Shops have raised their prices after that. And then from year to year it started to increase more and more. Now with inflation the prices are like you said almost 20% more expensive. So in our opinion it is not worth it anymore.
@Manon-yn6kb3 ай бұрын
Cute! It's hard to see the proper difference though; the before and after shots were filmed in different lighting...
@KyokoSaphira3 ай бұрын
You are absolutely right! Thank you for the feedback ❤️
@rakeshbiswas4043 ай бұрын
Very Very Nice....
@Nikencycollects5 ай бұрын
Hiii , do you paint garage kit for people?
@user-bc2vv5km3f5 ай бұрын
god is this english cringe holyyy
@KyokoSaphira5 ай бұрын
Imagine editing these videos...you cringe even harder 🤣 English is not our first language so there is nothing we can do but practice speaking it.
@Jam772295 ай бұрын
You messed up putting it together. There isn't a flaw. Mine is perfect. You don't put the fire into the rock!!!
@KyokoSaphira5 ай бұрын
No we didn't. If you look at the promo pictures and the instructions you can clearly see that the fire is supposed to go into the rock.
@Ycekhold5 ай бұрын
And to think, I hesitated (to buy this).
@Alexlz995 ай бұрын
Do you guys take custom orders?😭
@KyokoSaphira5 ай бұрын
I am sorry we don't. You could try following the tutorial it takes a bit of practice but is not difficult at all.
@Alexlz995 ай бұрын
PSYCHO PASS IS PEAK
@KyokoSaphira5 ай бұрын
Please also check out Flameheart's Myriad Interests video who inspired us to do this DIY: kzfaq.info/get/bejne/g8yDat2jvZ3Tl2w.html
@lereserviste5995 ай бұрын
Merci 👌
@Gee013006 ай бұрын
Hi do you do some character about manhwa
@butterfluf49216 ай бұрын
I came to this video to see if it was just my figure, but you had the same issue! So mad at that paint transfer and that the flame will not easily go in that slit of rock! Its such a nice figure otherwise 😩
@angelsdoexist6 ай бұрын
OMG hikaru and kaoru!!!
@rin_hatake6 ай бұрын
You are ❤ talented
@KyokoSaphira6 ай бұрын
Thank you!
@rin_hatake6 ай бұрын
Wow , I will do Kakashi follow by your video ❤😮
@rakeshbiswas4046 ай бұрын
Very Very Nice....
@user-mt8tm3oi4x6 ай бұрын
Wtf is no Leatherface
@vvitoriawwinchester15097 ай бұрын
Peeeeerfect *-*
@Joyce-rv1vn7 ай бұрын
Which sheet did u used?
@KyokoSaphira7 ай бұрын
We used Overheadprojector Sheets =)
@Joyce-rv1vn7 ай бұрын
@@KyokoSaphira excuse me, can i please know again, was it silicon glue u used or😭, where can we get it?
@KyokoSaphira7 ай бұрын
We used normal hot glue and Vaseline. You can also use Silicon if you want then you don't need Vaseline because the resin doesn't stick to silicon.
@Joyce-rv1vn7 ай бұрын
@@KyokoSaphira ✨💓
@angelsdoexist7 ай бұрын
I really want to get the ouran high host club nendoroids. They look SO CUTE.
@KyokoSaphira7 ай бұрын
You won't regret it if you do 😊
@angelsdoexist7 ай бұрын
If only my preorders will stop coming out for a month or two so i can buy them LOL@@KyokoSaphira
@chib68017 ай бұрын
Yay, so glad you guys finally got your hands on the OHSHC Nendroids, they're so adorable
@chib68017 ай бұрын
I've watched Banana Fish. It's so good, but you're sure going to cry
@sohn12077 ай бұрын
Thank you for this video! im having a hard time fixing my one piece/mecha kits on my display cabinet and this video help me with some insights!
@KyokoSaphira7 ай бұрын
Thank you! We are happy the video was helpful. =)
@Kaneda7087 ай бұрын
Thanks now i can finally display my own collection :3
@keishareginahoestiawan58347 ай бұрын
I love bunny girl
@keishareginahoestiawan58347 ай бұрын
What is the swan lake anime figure called?
@KyokoSaphira7 ай бұрын
They are called White Odette & Black Odile and are from Skytube.
@kdakda4267 ай бұрын
May I know are there any paint differences on the headsculpt for Leon or any improvements for the classic version? Plan to get either one
@KyokoSaphira7 ай бұрын
No the sculpt and paint ate the exact same. Only the accessories and the outfits are different.