👨🏻‍🔧Another Day at the Junkyard: 4L60E TRANSMISSION REMOVAL IN 8MINS??

Рет қаралды 29,937

Junk Man A

Жыл бұрын

Пікірлер: 149

@fredstein5429 10 ай бұрын

took me 2 days and 4 showers to do what this dude just did in 8 mins...

@Ajunkman 8 ай бұрын

Hahahahah I just saw this 😂🤣😂 thanks for stopping by!!! (KZfaq is really weird about notifications)

@testosteroneinc.3800 5 ай бұрын

No busted knuckles, like me? 😂

@AM-js2fo 4 ай бұрын

Lol

@novakvideoproductions 3 ай бұрын

It took me 2 days plus a rest day in between.

@daviddonahue1862 24 күн бұрын

I'll be surprised if the pump servived...always remover torque converter/trans together.

@joemumma6776 3 ай бұрын

About to go pull one this weekend hopefully i can do it before the yard closes 🤣

@Ajunkman 2 ай бұрын

Hahahahaha did you get her pulled????

@kevinnelson7070 Ай бұрын

That was smart leaving the converter for last less weight to deal with, you are the first person I saw do it like that 👍🏿

@KD0LRG Жыл бұрын

In news today 4l60 transmission pulled from customers car while parked in the U Pull lot. 😂😂😂😂. Have a good one 🍺

@clay500 Жыл бұрын

More like the transmission pulled from customers car while waiting in the drive through of Chik Fillet.

@Ajunkman Жыл бұрын

🤣🤣🤣🤣🤣🤣🤣 aww man these comments made my day thanks for watching I appreciate the feedback 🙏🏽🙏🏽🙏🏽🤣🤣🤣🤙🏽🤙🏽🤙🏽🤙🏽👨🏻‍🔧👨🏻‍🔧👨🏻‍🔧🦾🦾🦾🦾

@Ajunkman Жыл бұрын

@@clay500 🐥 🤣👨🏻‍🔧🦾🦾

@kevinreinhardt9634 2 ай бұрын

Crew Chief and Pit President of Pick-N-Pull Pit Crew god damn son you were on a roll

@Ajunkman 2 ай бұрын

Hahahaha!! Appreciate the love bro thanks for stopping by 🙏🏽🦾👨🏻‍🔧

@guerrilove1 4 күн бұрын

Dammn that guy works hard!!!

@joshryan9727 3 ай бұрын

This guy would stripp a hellcat in 30 mins 😂😂

@Ajunkman 2 ай бұрын

Show me where it’s at I’ll try my hardest hahahaha thanks for stopping by 🦾👨🏻‍🔧🙏🏽

@eduardomenchaca1916 4 ай бұрын

This man…. Absolute machine. Usually takes me about 2-3 hrs but I don’t have any power tools. THIS MAN SHOULD BE CALLED THE JUNKYARD REAPER

@Ajunkman 4 ай бұрын

🥲sheesh the reaper haha!! Thanks man I appreciate it thanks for stopping by 🦾👨🏻‍🔧

@guerrilove1 4 күн бұрын

😂😂😂😂😂❤

@1973jamie1 2 ай бұрын

You are the man. Mad props to you brother!!!

@Realest1979 2 ай бұрын

Damn dude. Impressive. I thought you were pulling a 80 for that kind of speed and intensity 🤣

@joshuaheart2764 2 ай бұрын

Thanks for showing the attach mode. Got to do one for my dad tonight. Might still have a Sat thanks to you.

@sanehazardous715 4 ай бұрын

This gave me some confidence! Kinda was afraid to start on mine but now I’m trying to be you without cutting the lines of course😅

@Ajunkman 4 ай бұрын

Hahaha don’t cut those bro!!! Appreciate the feedback thank you 🦾👨🏻‍🔧

@CounterPunchNation 3 ай бұрын

Damn bruh you’re insane! Handled that shit like a boss! 💪🏿

@Ajunkman 2 ай бұрын

I appreciate it bro thanks for stopping by 🦾👨🏻‍🔧🙏🏽

@azimpal 5 ай бұрын

Great video……. Awesome work👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

@Ajunkman 5 ай бұрын

Thank you very much 🙏🏽👨🏻‍🔧

@richardthorntonjr9863 18 күн бұрын

That’s a new sub right there nice work 💯

@BestPriceSunCoastTransmissions 4 ай бұрын

Very good camera angles!

@Ajunkman 4 ай бұрын

I appreciate it!!! 🙏🏽🦾👨🏻‍🔧

@TBD3.0 Жыл бұрын

That's a nice catch.......scored👍🏻

@Ajunkman 11 ай бұрын

Yes sir she was a beauty 👨🏻‍🔧🤘🏽

@DustinKeating-yk3vq Ай бұрын

Damn that was a clean fluid pan your lucky as hell

@brandons.6824 25 күн бұрын

Good job Junk man. I like how u left the converter attached. That kills majority of your, fcn w/ that thing.

@yomommajumprcables 4 ай бұрын

Damn you were ROLLING

@Ajunkman 2 ай бұрын

Appreciate it brotha 🦾👨🏻‍🔧

@njthrift Жыл бұрын

Another great video. Thanks!

@Ajunkman Жыл бұрын

Got more coming!🙏🏽👨🏻‍🔧 appreciate it 🤙🏽

@alleenebishop6657 8 ай бұрын

❤you rock!

@Ajunkman 8 ай бұрын

Thanks for stopping by!! 🙏🏽😁

@daviddzedzy9194 Жыл бұрын

wow great work ur fast

@Ajunkman Жыл бұрын

Thanks bro I try 🙏🏽👨🏻‍🔧 thanks for watching 🤙🏽

@sedriccook2822 3 ай бұрын

Damn job well done

@Ajunkman 2 ай бұрын

Thank you very much 🦾👨🏻‍🔧🙏🏽

@richymcilwrick7776 3 ай бұрын

Thus dude fliped the pan off with out touching it i bet everyone else had to pry theres off. Every one who didnt have to pry the pan off comment and help this guy out

@Ajunkman 2 ай бұрын

Hahahha sometimes people gorilla glue their pans back idk why sometimes I have to pry it off too 🫣 thanks for stopping by!!!! 🦾👨🏻‍🔧🙏🏽

@ernestorodriguez8228 4 ай бұрын

It usually takes me around 1.5-2 hours at a easy pace, just pulled the 4L60 out of my truck this morning for a overhaul and to clean and repaint the frame since its getting a bit nasty under there as i saw today.

@Ajunkman 4 ай бұрын

Nice work bro! Hoped you got that thing painted away!! Thanks for stopping by 🦾👨🏻‍🔧

@carolynh4155 2 ай бұрын

Amazing

@Ron_D33713 2 ай бұрын

This mf so cold ice would get jealous 😂, yo I need to be down with this cat as much work as I see around the crib.

@Ajunkman 2 ай бұрын

Hahahahaha thanks man 🧊 I appreciate you stopping by 🦾👨🏻‍🔧

@mwshroomking 3 ай бұрын

Took bro longer to change sockets than anything image if he had a lift ... savage

@Ajunkman 2 ай бұрын

Wish the socket can just appear in my hands I’ll be under 5mins for sure lol thanks for stopping by!! 🦾👨🏻‍🔧🙏🏽

@WildAthletics Жыл бұрын

I'm going to try and find a 4x4 700r4 (later year around 92) at one of my local junkyards to fix my first vehicle ('92 Chevy Blazer) Do you come across those transmissions very often? Really love your content. Keep it up!

@KD0LRG Жыл бұрын

I don't see many in Michigan just due to the cars or trucks rusted out 20 years ago. I would question anything in the yard that isn't a crash car.

@Ajunkman Жыл бұрын

Yes sir I just pulled one of those last week!! I’ll record my next one! Yeah I come across them but they are getting a bit harder to find as time goes by Man, Thanks for watching I appreciate the support 🙏🏽🥹🙏🏽🥹🙏🏽🥹🦾👨🏻‍🔧🦾👨🏻‍🔧

@Ajunkman Жыл бұрын

@@KD0LRG yes sir! Anything not wrecked inspect thoroughly!

@gdmusic7990 6 ай бұрын

U make it look so easy lol

@Caleb-vc3yi 18 күн бұрын

Yea...i did not think that was possible...wow. what about the transfer case and driveshafts though?

@patrickreynolds801 Жыл бұрын

Slam dunk my man

@Ajunkman Жыл бұрын

Yes sir!!🙏🏽👨🏻‍🔧😎

@kendaniels7257 2 ай бұрын

I remener being abale to move that fast under a car, but now there is no chance i can remember those scocket sizes that fast. Lol. Lol

@Ajunkman 2 ай бұрын

Hahahaha you got this bro.!!! Thanks for stopping by 🙏🏽🦾👨🏻‍🔧

@dmperfection 4 ай бұрын

If I did it like this on my truck how would I ever be able to put it back together! 😂

@Ajunkman 4 ай бұрын

It’s not meant to do it on your truck 🤣 Go to the junkyard and have fun! 👨🏻‍🔧

@davidtrisha1469 Жыл бұрын

🤘

@Ajunkman Жыл бұрын

🤙🏽🤙🏽

@tommygarcia7406 2 ай бұрын

He came prepared with tools.

@rlfdavin Жыл бұрын

so if i want to keep the torque converter and flexplate to swap onto my 5.3 should i do it this way as well? pull trans... then torque converter? or should i take out the torque converter bolts and pull the trans and torque converter as 1 piece? then grab the flex plate. since its gonna go back onto my suburban?

@Ajunkman Жыл бұрын

If you’re doing it at home with a transmission jack with no potential falling impact it’s best to remove it in one unit, I remove the transmission first and torque converter afterwards because if you leave it in there’s a chance you can break the pump or damage the shaft it’s happened to me before, it’s just heavier and falls awkwardly and can get pretty dangerous Thanks for watching 🤙🏽👨🏻‍🔧

@mikeh5039 5 ай бұрын

8 minutes lol 😂

@Ajunkman 5 ай бұрын

Guys a legend 😅😂

@rickjones6798 2 ай бұрын

I did two trannies but they were four-wheel drive on envoy and it took me a week but I'm 62 also

@Ajunkman 2 ай бұрын

Good job bro 🦾👨🏻‍🔧 thanks for stopping by 🙏🏽

@allendaigle6351 8 күн бұрын

Dude stole it😂

@XanderValdez-lc1xz 5 ай бұрын

So if I wanted too use one of these transmisssion out of an envoy or it’s all I can find how would I go about putting it in my 5.3 ls will the bell housing line up or would I have too use my old bell housing and torque converter?

@Ajunkman 4 ай бұрын

Yes it’ll work just make sure the front shaft is the same some of the trailblazers have that ugly mini shaft with the tiny torque converter Sorry for the late reply been super busy these past couple months have 10 more videos getting ready to be uploaded 🦾👨🏻‍🔧🔩🙏🏽

@jeremyhanna3852 2 ай бұрын

I believe your cousins own a shop in slc ut they specialize in swapping triton v8 and v10 in 99 to current f150 250 and superdutys got to buy jasper crate engine from them but u drop the truck off before 7am on weekday its done by noon or you drop it at noon and its done by 5pm that day its 3 brothers its all they do they are quick they do 2 a day its the crate engine price plus 1000 labor

@briankriss7310 2 ай бұрын

LOL man you took that apart so fast what'd you do work in a Chop Shop? You know I'm only joking correct? I know when you do this stuff for years you know exactly what you're doing and how fast you can do it I've been there

@Ajunkman 2 ай бұрын

HAHAHAHA that was funny!! Thanks bro I appreciate the feedback and just like you said after 14 years I better be able to pull it off this fast lol!!! Thanks for stopping by 🙏🏽🦾👨🏻‍🔧 I have a lot more videos coming soon!

@ALCRAN2010 Ай бұрын

How long to uninstall a couple cats?? 😂😂😂

@waltercardenas7354 Жыл бұрын

How come you did not take the oil pan out before to see the moment of true?

@Ajunkman 11 ай бұрын

Sometimes they just smell so good!

@user-ql7jx9ge4e Ай бұрын

Should leave the 4L60 in the junk yard. Scrap transmission lol

@arresthillary9502 Ай бұрын

mine has 269,000 on it. is that junk?

@getums01 3 ай бұрын

What brand socket swivel are you using?

@Ajunkman 2 ай бұрын

Snap on 1/2” part no. IP80D Best swivel I’ve ever used 7 years deep with this one

@user-to1sq5gh8t Ай бұрын

Where is it?

@user-cq2nj9bb7u 6 ай бұрын

What is better to rebuild a transmission or get another one from junkyard

@GutterGuys 6 ай бұрын

Try a junk yard bro find truck that’s smashed in the front that’s usually a good bet

@Ajunkman 4 ай бұрын

Smart man! What this guy said ☝🏽 Appreciate y’all for stopping by 🦾👨🏻‍🔧🔩

@grifonks Жыл бұрын

I saw that thumbnail of someone carrying a big auto transmission and my mouth dropped open. m15 caps suck

@Ajunkman Жыл бұрын

Haha!! I almost put one on my shoulder today for the next thumbnail! Maybe tomorrow 🤣 thanks for watching bro 👨🏻‍🔧🙏🏽

@AmusedCamping-ms7uz 5 ай бұрын

how did you lift this back in your car?

@Ajunkman 5 ай бұрын

With my arms lol

@johnrogers2849 2 ай бұрын

torque converter needs to be unbolted before removing the transmission if you are trying to save the front seal and bushing.

@Ajunkman 2 ай бұрын

False. Last 500 transmissions I’ve pulled front seal bushing have never been harmed. Stop spreading fake info it’s not good for the industry. Or make videos explaining why and tag me later. It’s actually safer to remove the way I do it I’ve broke bell housings letting them slam on the floor before with torque converter inside. Go make some videos and teach me.

@johnrogers2849 2 ай бұрын

@@Ajunkman You are honestly telling me you believe that is the proper way to remove a transmission?

@johnrogers2849 2 ай бұрын

Oh and not a junkyard transmission. Spend some time in a professional shop working on automobiles and you will never see a transmission pulled with the torque converter still bolted to the flywheel unless the motor can not be rotated to get it out.

@Ajunkman 2 ай бұрын

@johnrogers2849 I can get you $1000 I’ll do it faster than you any way you want yo do it princess. We don’t work off the book around here we get shit done

@Ajunkman 2 ай бұрын

Lmao. I’m at a junkyard not at a professional shop Mija.

@jeremyhanna3852 2 ай бұрын

I thought i was good at 1hr put i also pull the pan first see if the clutche are in the pan and i pull the convert bolts threw starter hole

@teeturnswrenches504 3 ай бұрын

Takes me 2 hours maybe lol god damn

@Ajunkman 2 ай бұрын

Hahaha thanks for stopping by bro🙏🏽 been doing this my whole life 🥴🦾👨🏻‍🔧

@carsandhealthtoddrosenzwei2661 4 ай бұрын

Loose nuts are flying everywhere! This guy is a master

@Ajunkman 4 ай бұрын

🔩⚡️🔩⚡️🔩⚡️I appreciate the feedback brotha 🙏🏽🦾👨🏻‍🔧 thanks for stopping by !!

@GOMEZJ76 Жыл бұрын

What do you do with them? Resell them or rebuild or??

@Ajunkman Жыл бұрын

All of the above brotha 👨🏻‍🔧

@BONDRO Жыл бұрын

How much do they cost you

@Ajunkman Жыл бұрын

Thanks for watching! 🙏🏽👨🏻‍🔧 A couple hundred bucks

@UceT23204 17 күн бұрын

Not your first rodeo lol

@Ajunkman 11 күн бұрын

🤠 lol no sir

@joshryan9727 3 ай бұрын

No way that's up north. Every bolt would have been a problem 😂💯

@Ajunkman 2 ай бұрын

Hahahahah I’ll attack rusty bolts the same way bro I’m 6’3 250lbs there ain’t a bolt on this planet I’m not cracking lol anyways thanks for watching 🦾👨🏻‍🔧🙏🏽

@datz_nice_805 11 ай бұрын

How much u pay for them

@Ajunkman 11 ай бұрын

$350-$400

@natepitts6255 5 ай бұрын

When you don't care it's easy to pull

@Ajunkman 5 ай бұрын

Caring is for women or soft men

@mikeh5039 5 ай бұрын

Nope

@Ajunkman 5 ай бұрын

🤡

@Ajunkman 5 ай бұрын

Yes Mike. Yes.

@budthechud3408 6 ай бұрын

How can propping a vehicle on rims be safe? i mean come on!!!

@Ajunkman 6 ай бұрын

Have you ever done it or are you just a keyboard warrior?? Has your life ever been saved multiple times by “propped rims” if the answer is no then keep your opinions to yourself leave the tough work to real men mija

@budthechud3408 6 ай бұрын

Take a chill pill dude your blood pressure is going up!@@Ajunkman

@Ajunkman 6 ай бұрын

@@budthechud3408 lol what a womanly response. Take care. Show your face online if you’re going to be critiquing.

@budthechud3408 6 ай бұрын

@@Ajunkman lay off the roids dude seriously! the alpha act is played out and pathetic!