This Chevy TRANSMISSION Swap Was The Same Price As THE TRUCK

Рет қаралды 342,078

3 жыл бұрын

I bought a 2010 Chevy Silverado that runs and drives for $2,800. The replacement transmission was $2,500 with a $1,000 core so $3,500 out the door!! It might have cost quite a bit but the replacement was an easy job that just takes a bit of time. We're going to pull the old transmission that barely made it a year out and put in the new PowerTorque unit I picked up at O'Reillys.
6L80e Transmission:
www.oreillyauto.com/detail/b/...
Kooler Kleen: www.oreillyauto.com/detail/b/...
MERCH: shopWatchJRGo.com
Shop Motul: motul.com
---------------------------------------------------------------
Common Questions:
What motorcycle do I ride? A few. Ducati 1198, Honda Goldwing, Honda Grom, Honda Ruckus
What do I do for a living? Make KZfaq videos.
Can you wheelie? No, I suck.
Are you fast? Sort of. I suck mostly though.
Where can I keep up with you off the bike?
Instagram: WatchJRGo
Facebook: WatchJRGo (or JRGo, FB hates my branding)
Do you go to school? College, for 2 classes.
Why do you ride so dangerously? What do mean? I was doing 25.
Do you go to the track? Of course, hopefully there will be videos in the future.
Do you play video games? No, but I might stream N64 Goldeneye at some point. Twitch: WatchJRGo
Are you afraid the police will watch your videos and arrest you? Something something evidence something something warrants and due process of law
#CarRebuild #ChevyTrucks #Silverado

Пікірлер: 612

@HooviesGarage 3 жыл бұрын

"Flip"

@lal5555f 3 жыл бұрын

flop

@herbiehusker1889 3 жыл бұрын

Tyler, you're not really one to talk.

@alexmendoza5817 3 жыл бұрын

@@herbiehusker1889 If someone knows about "Flipping" (or Flopping), is Tyler... lol

@Aragorn3407 3 жыл бұрын

you should get over there and teach him more of the basics....he's still making too much money

@jd5179 3 жыл бұрын

Oh look whos talking . Lmao

@Moosecop32 3 жыл бұрын

You may go to far on these cars from a profitability standpoint but you fix them correctly and people are getting good cars from you. You're building a reputation worth having and your honesty is what's building your KZfaq channel up so big. Keep doing what you're doing. It's working.

@nukekhang1740 3 жыл бұрын

CarNinja- “I have a question. Why the hell am I here this is a Chevy.” Me- CarNinja should have said this when he was assisting WatchJRGO on the Camaro 😂😂😂

@ceetwyce335 3 жыл бұрын

🤣🤣🤣

@zephead843 3 жыл бұрын

Car Ninja's making 150K/yr. fixing $hitbox BMW's. No time for Chevys.

@FrietjeOorlog 3 жыл бұрын

Hoovie's Cayenne in the background. He is actually putting money in that hooptie, wow. And that's probably also his SLS.

@kingjlinza 3 жыл бұрын

I have a feeling the Cayenne will be going up for sale on Cars and Bids once it’s done

@FrietjeOorlog 3 жыл бұрын

@Build-A- Ride IF the engine is the only big thing. Porsches ain't cheap to fix. Must be nice getting all your parts for free. And even if he just breaks even, he makes money on the videos so win-win. You or I would struggle to make a profit.

@7477238 3 жыл бұрын

@Build-A- Ride In addition to the motor he will have to redo the interior and those first gen Cayennes love to kill their driveshafts (or cardan shaft as Porsche likes to refer to it as) so I'm sure it'll need a new one of those too. Wonder if things like the AC, stereo and various accessories work on it.

@kingjlinza 3 жыл бұрын

Build-A- Ride is it bad that I check Cars and Bids as if it were a social media site?

@scottcol23 3 жыл бұрын

The one time you actually find out the "I replaced the trans and converter last year" is actually true. Thats rarely the case.

@SGcomputing 3 жыл бұрын

Either it never happened, or they replaced it with a junkyard one with more mileage than the rest of the car lol

@Dracale 3 жыл бұрын

I appreciate customers that put the plugs back in cores to be returned. Thank you for showing that and your parts person may not say or notice it at the time of return. I promise you that whoever is handling it does appreciate it. The reason being is that if there is fluid in there, it can go everywhere.

@BeardofPOP 3 жыл бұрын

Really enjoying this series, love all the information I gain from your videos. Thank you!

@kd5ydu 3 жыл бұрын

Glad I stayed up late tonight for the latest installment in this flip! I enjoy the channel and your content.

@scottcol23 3 жыл бұрын

Johnny is the MVP for always letting you come destroy (temporarily) his always immaculate shop. He is a true friend. Plus, im sure he's seeing the surge in business because of you and Tyler.

@ceetwyce335 3 жыл бұрын

Especially Tyler. Lawd! 🤣🤣

@mj_aussie_coaster_travels8310 3 жыл бұрын

scottcol23 I wouldn’t be surprised if he’s renting out the hoist on an hourly basis to jr. it’s about the only way a shop would let a hoist be used by someone else.

@scottcol23 3 жыл бұрын

@@mj_aussie_coaster_travels8310 Its always after hours, and its always randomly when Tyler hoover is working on a car too. So he may charge him. But my guess is no, but who am I to know.

@bikeman1x11 3 жыл бұрын

@@mj_aussie_coaster_travels8310 or its after hours and it brings business- If I was in the area and had a german car id bring it to Johnny's shop for sure because of youtube

@jasonw3303 3 жыл бұрын

No clue. But when you see what Johnny is about you’d want to take your car to him. I think it’s good pr.

@scottcol23 3 жыл бұрын

I love that you fix everything wrong with these vehicles, but its no longer a flip. It more of a refurbish that you could sell as a certified used truck. Lol

@WatchJRGo 3 жыл бұрын

I really go way to far on these cars... more of projects than flips 🍻

@maddoxwca 3 жыл бұрын

WatchJRGo nothing wrong with doing something correctly.

@vikingman4614 3 жыл бұрын

Well since he is doing the right repairs hopefully he ask the right price when selling it to make his money back and some profit.

@infamousgerald 3 жыл бұрын

great content on this rebuild tho

@scottcol23 3 жыл бұрын

@@WatchJRGo true. But its nice to see regular vehicles being sorted out and sold to people who need them. I love it. Too many people pressure wash the engine bay and call it sorted

@bigtexas7580 3 жыл бұрын

*7:38** That's one badass trans jack, looks like it costs a small fortune. I'm replacing the trans on my 08 denali right now on the floor in my garage and it's much more difficult without a lift and trans jack.*

@maxcinta5760 2 жыл бұрын

I have swapped a few transmissions in my life. I learned from one swap to install two front main seals by driving one in on top of the other. It works every time! I don't like doing the same job twice in one day, so now I always install two new seals every time before I bolt on a transmission.

@chrisguillen1495 Жыл бұрын

What if someone already did and you’re installing a 3rd? Would it fit or just fall inside the block?

@jethro83100 3 жыл бұрын

I'm amazed at what you know about vehicles, love your videos.

@albertlilly 3 жыл бұрын

Awesome! Great job on that transmission replacement!

@colormesarge 3 жыл бұрын

At this point, you've put in so much work that I want to buy this truck.

@BmwMe-uh9sy 3 жыл бұрын

I still wouldn’t want a shitbox

@djentyman4002 3 жыл бұрын

Buy yourself a Ford pickup.. not that piece of junk

@nicholas5623 3 жыл бұрын

To bad it's 2wd

@Chinunit22 3 жыл бұрын

@@djentyman4002 You do realize that Ford ain't better or could be worse, they are also have their own issues

@coronavirus4287 3 жыл бұрын

Okay pay pal me

@thebonefish 3 жыл бұрын

Great progress so far on the restoration!

@davidnielson5252 3 жыл бұрын

John, I completely agree with you. I am a true car guy and do not find comfort in getting the cheapest and sending it down the road. I want that truck to give someone years of enjoyment...not problems. That is what makes me happy. The love of money is the root of all evil. The love of cars(and trucks) is happiness! Rock on John!!!

@jamesgeorge6551 3 жыл бұрын

If you are installing a rebuilt or reman trans, you should have the cooler flushed at a transmission shop that had a heated solvent air over hydraulic flush machine, designed to clean coolers, or just replace the radiator(if the trans cooler is inside of it). Cooler flush in a can dosen't work well when the previous trans had planet, bearing ,bushing or sprag failure where lots of metal debris is created. And the 6L80/90 are known in the industry as converter dumping, metal making machines.

@johnathanharper3343 7 ай бұрын

Nah

@johngarcia5396 3 жыл бұрын

Good content. Strong knowledge and expertise!

@jamesluke7377 3 жыл бұрын

We used the trans flush cleaner at the trans shop in Grandview, MO as well. After the flush, we blew the system clear with compressed air also.

@fuzzycuffs 3 жыл бұрын

I see Hoovies clapped out Cayenne in the background

@BmwMe-uh9sy 3 жыл бұрын

Doesent look clapped to me

@benlinus4696 3 жыл бұрын

I really feel my age.. what does "clapped out" mean to you n your generation?

@obeseiwancannoli2177 3 жыл бұрын

Ben Linus think of a $5 hooker ...

@christinesommerfeld9815 3 жыл бұрын

@@benlinus4696 wore out

@ceetwyce335 3 жыл бұрын

Tyler to John: "You've turned into me." I effs with both of y'all. 👍🏿

@garagerebuilds1604 3 жыл бұрын

That is awesome atleast u got great transmission in it for the next customer great job jr

@Buc_Stops_Here 3 жыл бұрын

The warranty is definitely worth it - smart move!

@nickrobin5235 2 жыл бұрын

Everyone always forgets about the rear main seal, might as well change it too. Also I would’ve add fluid to the new torque converter.

@Joker-tp3fd Жыл бұрын

Yess bro, cuz then you have to bring the transmission down and do it all over again😂🤌

@famousseamus3 3 жыл бұрын

"quick little 5 hour job" love it!

@kendaniels7257 2 ай бұрын

Dam. You made that look easy. Those lifts sure help.

@10rcoleman 3 жыл бұрын

That thing is clean underneath probably one of the cleanest used trucks I've seen.

@mikeobrien3744 3 жыл бұрын

You and Hoovie make moving to Kansas look good. I think everyone in Kansas a nice person.

@mexicanspec 3 жыл бұрын

Even if everybody in Kansas are nice, you are still in Kansas.

@Apethgrader 3 жыл бұрын

@@mexicanspec If Kansas is bad then there's no reason to leave the west coast. Stay in Commiefornia. Don't come to Texas either.

@mexicanspec 3 жыл бұрын

@@Apethgrader If you are directing your comment at me, where did you get the idea I lived in California. I don't even live in Baja California.

@RichieRouge206 3 жыл бұрын

Really good replacement there dude

@deanwhite9394 3 жыл бұрын

love the dirt on the exhaust, looks just like my vehicles.

@workingmansrestorations7071 3 жыл бұрын

Nice when trans was pulled recently. Makes job a lot easier

@Cartier_specialist 3 жыл бұрын

You must be the best one arm mechanic around.

@glassvial 3 жыл бұрын

Hoovie: You're turning into me JR: except that I actually do my own work... 😉

@DaveSomething 3 жыл бұрын

I'm always amused at how neat and clean Johnny is...

@jamesjames3525 3 жыл бұрын

Good video as it moved on quickly thank you.

@pussygalore5947 3 жыл бұрын

I'm constantly amazed at how much JR knows, but I also wonder why Johnny allows any of the Wichita Car Mafia to work in his shop. He's jeopardizing his insurance, his equipment is being depreciated, his bay is taken up and I doubt seriously any of these guys compensate him.

@bikeman1x11 3 жыл бұрын

publicity?

@mikesemailaccount3985 3 жыл бұрын

Chevy's are great ! Proud owner 2020 Silverado RST !

@scottcrockett8270 3 жыл бұрын

YES!! Was waiting on this

@tal5338 3 жыл бұрын

Excellent works 👍

@boydmerriman 3 жыл бұрын

The last time I pulled a transmission was to replace my flywheel (automatic). The gears were so bad, I couldn't crank it up. It was on an old dirt parking lot in a small town, and that thing was sitting on my chest while I rolled it off to the ground! Then I had to reverse the move and get it back on my chest while I pushed it back up in place!! 1968 Chevy Truck. It was around 1988 I think.

@BrotherNotBrother 3 жыл бұрын

You need to make a playlist for this truck!

@danielgloates5903 3 жыл бұрын

11:36 that top bolt looked fun

@LiquidSm0ke 3 жыл бұрын

Thing I like about jr is he’s a nice dude Not a fake KZfaqr like so many car channels on KZfaq

@scottcol23 3 жыл бұрын

They always put An insane core charge on these transmissions because they want you to give them your old trans so they can rebuild it. Its a great business strategy. You essentially never run out of inventory, and if you do. You made $1000 off the core.

@MrWoodyBalto 3 жыл бұрын

I worked a brake shop in the 80's. We saved all the used pads and tossed the in a barrel that would get picked up weekly by a company that sold relined brake pads. The steel backing is the core. They just clean and repaint them and bond or rivet new pad material to them.

@honestguy7764 3 жыл бұрын

Its also logical. When I was a kid Imhad to take the empty cola, beer and fanta bottles back to the store, where I could hsve a small fee returned or trade in for new sodas. That model is still in use at the bars and pubs but that dissapear at home level with recyclabe glass in the early 90s. Some many car parts can be refurbished to a “new” state. Alternators are a nice example, the rewind the copper, the bearings and the diode. Case, shaft, pulley and conmutatores are checked and then, reused. It will save you a lot of money, plus the energy and chemicals involved y recycling the whole alternator is avoided altogether...

@hindlece 3 жыл бұрын

Gear Jammer exactly in my state of NY you pay 5 cents for every can/bottle/ or plastic bottle with a few exemptions. And you get your 5 cents back when you turn them in

@mexicanspec 3 жыл бұрын

@Bailey Hatfield No it isn't better. A lot of backings aren't made anymore for the older vehicles and this way brakes stay available for them.

@mexicanspec 3 жыл бұрын

Scott, you can't say JR made $1000 on the core. They charge him that $1000 when he pays for the transmission, so he just gets his own money back.

@Jvanzterr 3 жыл бұрын

Who else just watched the previous video and thought damn ima have to wait a week for the next ;)

@caseyanderson1297 3 ай бұрын

I've done these on the ground, because that was my only option, but if you get a lot of blocks and block it off the ground as high as you can safely, it's not to bad. I had a sawmill and cut a butt load of blocks to get them a solid 5 foot of room at least

@davidwestmoreland3909 3 жыл бұрын

That’s no fun having a lift, transmission jack and proper tools. I took a C4 out of a 65 Mustang on the driveway with an old floor jack and enough tools to repair a lawnmower. Took it out, overhauled it, replaced some parts and it worked. Spent about $50 and two weeks time after work. That was before KZfaq.

@BmwMe-uh9sy 3 жыл бұрын

Hoovie rlly sees John as a rival, I like the rivalry clash

@ajw828 3 жыл бұрын

So cool that Jonny let you use the shop and stay so late to git 'r dun - and that he even lent a hand on a Chevy haha

@AutoAuctionRebuilds 3 жыл бұрын

*You made that look easier than changing oil lol*

@sjd73ss 3 жыл бұрын

Thats because it is easy. Thats how its done by a real mechanic

@kgb4187 3 жыл бұрын

@@sjd73ss oh snap, shots fired at Auto Auction Finances

@blueovalfan23 3 жыл бұрын

@@sjd73ss lol "real mechanic" you keep telling yourself that.. some of us "shade tree" guys are better than some of the "real mechanics" out there.

@lilelbow3062 10 ай бұрын

Bro I’m havin problems with my 13 5.3 pos Chevy and I think this vid actually really help me get a good idea on what I’m about to do hopeful I don’t fuck it up if I do it myself but then I have to do it on the ground😭😭

@kakrew4764 3 жыл бұрын

Need to program the TCM to update it to your truck. Don’t ever skip that step.

@viewersnetwork 3 жыл бұрын

I was waiting on that

@neverthatnever Жыл бұрын

How do you do that

@romifrentescu871 5 ай бұрын

Will that cause hard shifting?

@terrylessmann2274 3 жыл бұрын

It used to be a fun game to drink for every Hoovie car you saw at The Wizard's shop. Now you can do the same drinking game at The Car Ninja's. 2 shots comin up!

@ur2fat2weardat28 3 жыл бұрын

The lift and trans jack beats laying on your back in the driveway and lifting it off your chest.

@KRTube75 3 жыл бұрын

Should have made a video of you rebuilding the trans. They are surprisingly easy to disassemble and rebuild.

@anthonygarcia2267 3 жыл бұрын

Damn bro...u do everything...wow...good job...👍👍👍👍

@grandparolie 3 жыл бұрын

JR I bought a 4L60e from them as well and so far the Trans has been super now I bought it from them because they redo the whole Trans not like most Trans shops that just replace the broken part or parts.

@yeliab67 3 жыл бұрын

I did the same job with 4 jack stand and a floor jack. Waller-ed it out with my knees and hands, let it land on my chest/hips and rolled it over on the floor. After that I went out and bought a trans jack. Sad, but usually the way I do things.

@jamesluke7377 3 жыл бұрын

A piece of suggestive advise. After finger tightening trans to engine bolts, I learned to use a 3/8th drine air impact to do final tighteng of the bolts. It was faster as well as sufficient. You could theoretically tighten them to torque specs, but with the extensions and swivel(s) it would not be accurate anyway.

@bdtaylor1979 3 жыл бұрын

On gm vehicles you usually check the transmission fluid with the transmission in park not neutral.

@connorvelthuis2221 3 жыл бұрын

Bobby Taylor I believe it usually has the instructions on the dipstick itself for gm. Park, warm, idle, or whatever it takes for your vehicle

@Bumblebee4788 3 жыл бұрын

Reverse to Drive a few times after adding fluid, then check level on GM cars and trucks when in park.

@FTWGGG 3 жыл бұрын

Right before I go to bed nice

@prkoqui 3 жыл бұрын

Awesome build. Should be a quick flip

@mjmcomputers 3 жыл бұрын

Will be a good truck for the new owner.

@Legend_1754 3 жыл бұрын

8:04 Excellent question, Ninja XD

@batterymakermarkii2654 3 жыл бұрын

06:58 You sound like Thomas Edison, when he lost his shirt on an ore extraction process-- "Well, it's all gone, but we had a hell of a good time spending it!"

@KenSiefert 3 жыл бұрын

Nice work👍

@CinnaBonBun69420 3 жыл бұрын

Nice guest appearance

@MakinEndsMeet69 3 жыл бұрын

Nice job John Ross, don't you just love a good transmission jacks. I really hope that you got a good transmission??? I don't think O'Reilly's would screw up do you??? Hope not. Thanks for sharing the video. Stay safe stay well and as always and God bless.

@_ketosucks1355 3 жыл бұрын

I been waiting for this. I still wonder if we will just never see the R8.

@jamesluke7377 3 жыл бұрын

P.S. I do NOT miss working in a transmission shop. Work all week and then it takes ALL weekend to get rid of the auto trans fluid stench. Then it's back to get smelly again.

@vikingman4614 3 жыл бұрын

Johnny is going to have to have you do transmission install in the future while he is doing a Engine rebuild

@69Dartman 3 жыл бұрын

Well, like the mechanic said they are very fond of that transmission. It is a selling point just like having a fresh timing belt and water pump is for a older front drive econobox is a good thing as a buyer, makes it easier to sell as one major expensive maintenance item is done for hopefully the life of the car.

@daveh2612 3 жыл бұрын

Quick and easy flip!!

@1leggeddog 3 жыл бұрын

You should get a T-shirt that litterally says "Not like this one"

@truegritgaming9010 3 жыл бұрын

I work for oreilly's never buy a power torque engine or transmission they do not back there warrantys at all and are just junk we have had so many angry customers because of them. Get tri star they are so much better and actually back there warrantys

@dankwearadministrator5061 3 жыл бұрын

Awesome job

@toddrobertson1398 3 жыл бұрын

The good car is the mini vert. In the background that is the spitting image of mine :)

@blacksupersport8311 3 жыл бұрын

Nice work

@watchmewrench9462 3 жыл бұрын

I hope you can find a good set of used tires minimum. When I see bald tires, I just assume the previous owner didn't have the money to do regular maintenance. It's usually not a good sign.

@SGcomputing 3 жыл бұрын

I use this when I look at cars too. The amount of tread, and what kind of tire. If they had jinyu tires on it, they probably wanted minimum cost to keep the car running

@SavageBunny1 3 жыл бұрын

Yeah, and mismatched tires are annoying AF.

@An_Albosaurus 3 жыл бұрын

After doing a 4L80 on a 93 4WD Suburban with no lift, just looking at this job I envy how easy it is

@user-xw7dq8vv1i 5 ай бұрын

I have to replace rear main seal on a O5 Tahoe I’ve owned for years a Z71 fully loaded and still pristine . But I’ve been putting it off brim working on the ground by myself. Something that in my 20s was a lot easier. Now closer to 50 I’ve been putting it off but will get it done

@suckit0007 Жыл бұрын

10:46 is the time when I think about how to tf did I get myself here 🤣

@garyi8608 3 жыл бұрын

Cool truck. Hopefully you make some dough on it when sell and is a lot of work and money put into it.

@james10739 3 жыл бұрын

I do my top bolt from the top with a ratchet wrench and the other top ones with long extensions and 1 swivel from all the way back but also always on the ground because I'm poor

@jaxjax5322 3 жыл бұрын

Its incredible in that trucks the single cabs worth more money then the extended cabs

@just.nolan115 3 жыл бұрын

Can you make a video about putting a car up for sale? the process of it beginning to sale? that would be so great !!

@dariusboykin750 3 жыл бұрын

Quality content

@ToomasTelling 3 жыл бұрын

i knew hoovie was about to show up because of the SLS in the background :)

@rafalhalicki9596 3 жыл бұрын

Great job

@limabravo6065 3 жыл бұрын

Back in June I picked up an almost mint condition (with 300k miles) 04 Tahoe with the flex fuel 5.3 and it runs great but the mileage blows (I rebuilt the heads, installed a 615-183x intake, long tube headers, and tuned w-HP Tuners). I went from an average of 14 mpg to 15.5. With the performance stuff I’ve done and what I plan on doing I want a transmission that will A. Live & B. Give me a wider range of gears. So I’m looking into putting in a 6l80e out of a later truck and physically it’ll fit ( with some tweakage of the mount and cross member) but what I’ve found out is that the controller is inside the trans, so anyone out there who knows if these transmissions can be swapped and controlled into earlier vehicles please hit me up

@joedingman4181 3 жыл бұрын

Good thing you're besties with the ninja full blow repair shop with all tools at hand.......

@Spring794 3 жыл бұрын

JR is like a KZfaq version of wheeler dealers

@WatchJRGo 3 жыл бұрын

I met Ed at SEMA, cool dude 💯

@FrietjeOorlog 3 жыл бұрын

@@WatchJRGo Edd ;)

@wurlyone4685 3 жыл бұрын

@@WatchJRGo Ed's a legend!

@philgrimsey3637 3 жыл бұрын

Except that JR comes across as a nice knowledgeable guy, whereas Brewer just seems like a cheesy spiv who gets everyone else to do the work

@trentdawg2832 3 жыл бұрын

I have a cls550 just like the one behind you guys but mine is mettalic black with a dark red burgundy wine leather interior. ..

@101spacecase 3 жыл бұрын

These type of trucks go for 8-12k in my area depending on Year and condition. Most of the Trucks I looked at had 200k+ and were 8k. I finally gave up an took my chances on a slightly wrecked one..

@WatchJRGo 3 жыл бұрын

Yup, same market everywhere, truck market is insane right now! 💯

@trvman1 3 жыл бұрын

Ok, I know this is going to sound crazy :) I have had 2 cars for about 35 years. One has been a sedan and one has been a van and then to min vans. I can fit plywood, drywall, washer, dryer and more (not all at the same time) :) I can pull my 18 foot boat with the mini-van too. Room for people too. MUCH less cost then a truck and I have never had to do any major repair work on any the vans. Just normal maintenance work. They get up to about 150,00 miles before I replace the van and that usually about 15 years of driving.

@101spacecase 3 жыл бұрын

@@trvman1 very smart I never considered. I could probably mow right out of a van. Then haul trailer if I need another mower.

@christopherelrod8788 3 жыл бұрын

I've gotten to the point where I can do a two wheel drive 4l60 in about an hour. That's out flushed and in. I also do transmissions for a living

@damonmason2650 3 жыл бұрын

WatchJRGo: Many salutations! Very nice transmission interchange you executed; I am glad that it succeeded. I do think that there should have been an aluminum flywheel, a slightly smaller torque converter, and a brand-new exhaust pipe network added along with a new rear main seal while the power train was dissected that way. Why, John Ross? Why did you not think to do all that?

@RedneckTaZ 3 жыл бұрын

"Why the hell am I here??? This is a Chevy!" I love the Car Ninja.

@kurtiwaniuk 3 жыл бұрын

Holy crap! Been watching your channel for a year and just now subscribed! My bad.

@ToxicMisfitsYt 3 жыл бұрын

They make a clamp to mount the manifold If the bolt is broke

@SGcomputing 3 жыл бұрын

Those GM “W” clips have to be the worst quick disconnect. Even with the tool they don’t work right, they always fly halfway across the shop and where they connect is always in the worst spot so you gotta fight the clip while trying to get at it lol