Рет қаралды 6,198
In this tutorial, the Steady-state Heat transfer analysis has been carried out using both ANSYS Fluent. It is a motor Hub Geometry, with Heat generation on the surface attached to the shaft, there is convection Heat loss from the hub surface, the effective temperature and the corresponding thermal expansion is to be calculated In this analysis. In this part of the Tutorial, it has been shown "How to create the Geometry in ANSYS Design Modeller". and Meshing of the Hub Geometry using Hexahedral Structured Mesh. Please comment below for any query or doubt or any suggestion. Thank you Don't forget to subscribe to our channel.
PART -1
What will you Learn In PART-1 of the Tutorial?
- Creation of Geometry
- Application of "Offset to Create the Sketch"
- Meshing
- Creation of Structured Hexa Mesh.
PART- 2
Solver set up and Post Processing: • ANSYS Fluent Tutorial ...
Please Subscribe to our channel: / ansystutor
You can join us on Facebook, Instagram and telegram group for updates of our channel.
Various parts of the tutorial:
Part -1 (Geometry Creation and Meshing) : • ANSYS Fluent Tutorial ...
Part - 2 (CFD Solver Setup and Post-Processing) : • ANSYS Fluent Tutorial ...
Part - 3 (FEA): • ANSYS Tutorial: Heat T...
Part - 4 (Thermal Expansion analysis): • ANSYS Tutorial | Therm...